Ninja BL681C User manual

®BL681C
OWNER’S GUIDE
GUIDE DU PROPRIÉTAIRE
ninjakitchen.com
1 877 646-5288

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA™ | NINJA®
BLENDER SYSTEM WITH AUTO-iQ™
TECHNOLOGY.
POLARIZED PLUG
WARNING: To reduce the risk
of electric shock, this appliance has a
polarized plug (one blade is wider than
the other). This plug will fit into a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the totper outlet. DO NOT modify the
plug in any way.
WARNING: Extension cords are not
recommended for use with this product.
3 WARNING: Stacked Blade Assembly is
sharp and not locked in place. If using the
pour spout, ensure the lid is fully locked
onto the pitcher. If pouring with the lid
removed, carefully remove the Stacked
Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of
laceration.
4WARNING: Chopping Blade Assembly is
sharp and not locked in place. Before
emptying contents carefully remove lid and
Chopping Blade Assembly, holding it by the
shaft. Failure to do so will result in a risk of
laceration.
5 CAUTION: Do not blend hot liquids, doing
so may cause excessive pressure build-up,
resulting in risk of the user being burned.
6 CAUTION: We do not recommend
grinding in any of our Nutri Ninja™Cups.
7 CAUTION: Remove the Pro Extractor
Blades Assembly from the Nutri Ninja cup
upon completion of blending. Do not store
ingredients before or after blending them in
the cup with the blade assembly attached.
Some foods may contain active ingredients
or release gases that will expand if left in a
sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup, use
only Spout Lid to cover.
8 To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
9 DO NOT allow young children to operate this
appliance or use as a toy. Close supervision
is necessary when any appliance is used near
children.
10 Never leave an appliance unattended when in
use.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may cause the
jar to be damaged or to shatter which may
cause personal injury.
2 WARNING: The blade assemblies are
sharp, not locked in place and removable,
handle with care. When handling the blade
assemblies, always hold by the shaft.
Failure to do so will result in a risk of
laceration.

2
ninjakitchen.com
English
11 Appliance accessories are not intended to be
used in the microwave as it may result in damage
to the accessories.
12 Turn the appliance Off and remove the power
cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.
13 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
14 DO NOT operate any appliance with a damaged
cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to SharkNinja Operating LLC for
examination, repair or adjustment.
15 This appliance has important information on the
plug prong. The power cord is not suitable for
replacement. If damaged, contact SharkNinja for
service.
16 DO NOT let the power cord hang over the edge of
table or counter or touch hot surfaces such as the
stove.
17 Always use appliance on a dry, level surface.
18 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to the
appliance. A scraper may be used but only when
the appliance is not running.
19 Avoid contact with moving parts.
20 DO NOT attempt to sharpen blades.
21 DO NOT use the appliance if blade assemblies
are bent or damaged.
22 To reduce risk of injury, never place the blade
assemblies on the base without the pitcher or
Nutri Ninja cup properly attached.
23 DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
24 The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
25 DO NOT remove the container from the motor
base while the appliance is in operation.
26 To reduce the risk of injury, NEVER operate the
appliance without the lid in place; DO NOT try
to defeat the interlock mechanism; make sure
that the attachment is properly installed before
operating the appliance.
27 DO NOT expose containers to extreme
temperature changes.
28 DO NOT overfill.
29 DO NOT operate the appliance empty.
30 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
31 In the event that the unit overloads, the control
panel lights will flash and the unit will shut down.
Unplug the appliance and let it cool down for
approximately 15 minutes before using again.
32 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
33 The maximum rating is based on the Stacked
Blade Assembly (pitcher) that drives the greatest
power and other recommended attachments may
draw significantly less power or current.
SAVE THESE
INSTRUCTIONS

31-877-646-5288
LORS DE L’USAGE D’UN APPAREIL
ÉLECTRIQUE, DES MESURES DE
SÉCURITÉ ÉLÉMENTAIRES DEVRAIENT
TOUJOURS ÊTRE RESPECTÉES, Y
COMPRIS LES MESURES SUIVANTES :
LISEZ TOUTES LES CONSIGNES
AVANT D’UTILISER VOTRE SYSTÈME
MÉLANGEUR NUTRI NINJAMC
|
NINJAMD
AVEC LA TECHNOLOGIE AUTO-iQMC.
FICHE POLARISÉE
AVERTISSEMENT :
Afin de réduire les risques d’électrocution,
cet appareil a été muni d’une fiche
polarisée (une lame est plus large que
l’autre). Cette fiche ne peut être insérée
que d’un seul côté dans une prise
polarisée. Si la fiche ne s’insère pas
complètement dans la prise de courant,
inversez-la. Si elle ne s’adapte toujours
pas, contactez un électricien compétent
afin d’installer la prise murale appropriée.
N’altérez la fiche d’AUCUNE façon.
AVERTISSEMENT :
Il n’est pas recommandé d’utiliser des
rallonges électriques pour brancher
cetappareil.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Pour usage domestique seulement
2 AVERTISSEMENT : Le jeu de lames
superposées est tranchant et amovible; il n’est
pas verrouillé dans le récipient. Manipulez-le
avec soin. Lorsque vous manipulez le jeu de
lames superposées, tenez toujours l’arbre de
cette pièce. Le non-respect de cette consigne
peut entraîner des lacérations.
3 AVERTISSEMENT : Le jeu de lames
superposées est tranchant et n’est pas verrouillé
dans le récipient. Si vous transvidez un mélange
par le bec verseur, assurez-vous que le
couvercle est bien verrouillé sur le pichet. Pour
verser sans le couvercle, retirez d’abord le jeu de
lames superposées avec précaution en le tenant
par le manche. Ne pas procéder de la sorte
augmente le risque de lacération.
4AVERTISSEMENT : Les lames de hachage
sont coupantes et la tige n’est pas verrouillée en
place. Avant de vider le contenu, retirez
délicatement le couvercle et le jeu de lames de
hachage, en le tenant par la tige. Ne pas
procéder de la sorte augmente le risque de
lacération.
5 MISE EN GARDE : Ne mélangez pas des
liquides chauds, car cela pourrait entraîner une
accumulation de pression et causer des risques
de brûlure.
6MISE EN GARDE : Nous ne recommandons
pas l’utilisation des gobelets Nutri Ninja
MC
pour
moudre des ingrédients.
7 MISE EN GARDE : Retirez le jeu de lames Pro
Extractor Blades
MC
de la tasse Nutri Ninja après
avoir mélangé les ingrédients. N’entreposez pas
les ingrédients avant ou après les avoir
mélangés dans le gobelet fixé au jeu de lames.
Certains aliments peuvent contenir des matières
actives ou relâcher des gaz qui prendront de
l’expansion s’ils sont dans un contenant scellé.
Ces gaz peuvent causer une augmentation de la
pression et poser un risque de blessures. Utilisez
seulement le couvercle bec verseur pour couvrir
les ingrédients à entreposer dans le gobelet.
8 Pour éviter les risques d’électrocution, n’immergez pas
l’appareil et assurez-vous que le cordon d’alimentation
n’entre pas en contact avec l’eau ou un autre liquide.
AVERTISSEMENT :
POUR RÉDUIRE LE RISQUE D’INCENDIE,
D’ÉLECTROCUTION ET DE BLESSURES :
1 AVERTISSEMENT : Enlevez les ustensiles
avant de mélanger les aliments. Le non-respect
de cette directive pourrait endommager ou faire
éclater le récipient, ce qui pourrait causer des
blessures.

4
ninjakitchen.com
Français
9 NE PERMETTEZ PAS aux jeunes enfants d’utiliser
l’appareil ou de s’en servir comme jouet. Une
surveillance étroite est nécessaire lorsqu’un appareil
est utilisé en présence d’enfants.
10 Ne laissez jamais l’appareil sans surveillance pendant
l’utilisation.
11 Les accessoires accompagnant l’appareil ne sont pas
conçus pour l’utilisation dans le four à micro-ondes,
car cela pourrait endommager les accessoires.
12 Veuillez éteindre l’appareil (position « Off ») et
débrancher le cordon d’alimentation de la prise de
courant lorsqu’il n’est pas utilisé et avant le nettoyage,
l’assemblage ou le démontage des pièces. Pour
débrancher l’appareil, tirez sur la fiche et retirez-la de
la prise d’alimentation. Ne tirez jamais sur le cordon.
13 PRENEZ SOIN du cordon d’alimentation. Ne
transportez jamais l’appareil en le tenant par le cordon.
Ne débranchez jamais l’appareil de l’alimentation
électrique en tirant sur le cordon. Pour débrancher
l’appareil, tirez sur la fiche et retirez-la de la prise
d’alimentation.
14 N’UTILISEZ PAS l’appareil si sa fiche ou son cordon
est endommagé(e), s’il a fait défaut, s’il a été échappé
ou endommagé. Retournez l’appareil à SharkNinja
Operating LLC pour vérification, réparation ou réglage.
15 Des renseignements importants sont indiqués sur
les broches de la fiche de cet appareil. Le cordon
d’alimentation ne peut être remplacé. S’il est
endommagé, communiquez avec SharkNinja pour la
réparation afin de prévenir les dangers.
16 NE LAISSEZ PAS le cordon traîner sur le dessus
d’une table ou d’un comptoir. Ne le laissez pas entrer
en contact avec des surfaces chaudes, comme la
cuisinière.
17 Posez toujours l’appareil sur une surface sèche et de
niveau.
18 Afin de réduire le risque de blessures graves ou de
dommages à l’appareil, gardez les mains, les cheveux,
les vêtements et les ustensiles hors du récipient
pendant l’utilisation. Vous pouvez utiliser une raclette,
mais seulement lorsque le mélangeur est éteint.
19 Évitez le contact avec les pièces mobiles.
20 NE TENTEZ PAS d’affûter les lames.
21 N’UTILISEZ PAS l’appareil si l’ensemble de lames est
tordu ou endommagé.
22 Pour réduire les risques de blessures, ne déposez
jamais les jeux de lames sur la base sans fixer le pichet
ou une tasse Nutri Ninja correctement.
23 N’UTILISEZ PAS cet appareil sur ou près des surfaces
chaudes (telles qu’un brûleur à gaz ou électrique ou
dans un four chauffé).
24 L’usage des attachements accessoires, y compris
les pots de conserve, n’est pas recommandé par le
fabricant du fait qu’il peut causer un incendie, une
décharge électrique ou une blessure corporelle.
25 N’ENLEVEZ PAS le contenant du bloc-moteur pendant
que l’appareil est en marche.
26 Afin de réduire le risque de blessure, N’UTILISEZ
JAMAIS l’appareil sans le couvercle en place.
N’ALLEZ PAS à l’encontre du mécanisme de
verrouillage ; assurez-vous que l’attachement soit
correctement monté avant d’utiliser l’appareil.
27 N’EXPOSEZ PAS les récipients aux changements de
température extrêmes.
28 NE REMPLISSEZ PAS excessivement le récipient.
29 N’UTILISEZ PAS l’appareil lorsqu’il est vide.
30 Afin de réduire le risque de brûlures, permettez
toujours à l’appareil de refroidir avant de retirer les
pièces et le nettoyer.
31 Dans le cas d’une surcharge, les indicateurs du
panneau de commande de l’appareil clignoteront et
l’appareil arrêtera. Débranchez l’appareil et laissez-le
refroidir pendant environ 15 minutes avant de l’utiliser
de nouveau.
32 CE PRODUIT EST CONÇU POUR L’USAGE À
DOMICILE SEULEMENT. N’utilisez pas l’appareil
à d’autres fins que celles prévues. N’utilisez pas
l’appareil à l’extérieur.
33 La notation maximale est basée sur le jeu de lames
superposées (pichet) qui procure le plus de puissance.
D’autres accessoires recommandés peuvent nécessiter
significativement moins de puissance ou de courant.
VEUILLEZ
CONSERVER CES
DIRECTIVES

51-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL681C
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz.
Power: 1500 Watts
Pitcher Capacity: 2.1 L (9 cups, 72 oz.)
Max Liquid Capacity: 1.9 L (8 cups, 64 oz.)
Bowl Capacity: 1.8 L (8 cups, 64 oz.)
Nutri Ninja™Cup Capacity: 710 ml ( 3 cups, 24 oz.)
CE MANUEL CONCERNE LE MODÈLE :
BL681C
SPÉCIFICATIONS TECHNIQUES
Tension : 120 V~, 60 Hz.
Alimentation : 1500 Watts
Capacité du pichet : 2,1 L (9 tasses, 72 oz)
Cap. max. de liquide : 1,9 L (8 tasses, 64 oz)
Capacité du bol 1,8 L (8 tasses, 64 oz)
Capacité du gobelet
Nutri Ninja : 710 ml (3 tasses, 24 oz)

6
ninjakitchen.com
English
Contents
Thank you for
purchasing the
Nutri Ninja™
|
Ninja®Blender
System with
Auto-iQ™
Technology.
Getting to Know Your Nutri Ninja
|
Ninja Blender System with Auto-iQ Technology.............7
Before First Use ..........................................................................................................9
Assembly and Use of the Pitcher.................................................................................10
Assembly and Use of the Food Processor Bowl ............................................................12
Assembly and Use of the Nutri Ninja Cups ...................................................................14
Programs, Speed Settings & Uses ..............................................................................15
Care & Maintenance ..................................................................................................17
Troubleshooting Guide................................................................................................18
Replacement Parts.....................................................................................................18
Warranty & Registration..............................................................................................20
Table des matières
Merci d’avoir
acheté le système
mélangeur
Nutri NinjaMC
|
NinjaMD avec
la technologie
AUTO-iQMC.
Comprendre votre système mélangeur Nutri Ninja
|
Ninja avec la technologie Auto-iQ ............21
Avant la première utilisation ..................................................................................................23
Assemblage et utilisation du pichet........................................................................................24
Assemblage et utilisation du bol du robot culinaire.................................................................26
Assemblage et utilisation du gobelet Nutri Ninja.....................................................................28
Programmes, réglages de vitesse et usages ..........................................................................29
Soins et entretien..................................................................................................................31
Guide de dépannage.............................................................................................................32
Pièces de remplacement.......................................................................................................32
Garantie et enregistrement....................................................................................................34
Français

71-877-646-5288
Getting To Know Your Nutri Ninja™
|
Ninja®Blender System with Auto-iQ™Technology
b c
i
k
a
d
h
j
dFood Processor Bowl
eFood Processor Lid
fDough Blade Assembly
gChopping Blade Assembly
aRegular 710 ml Nutri Ninja Cup (x2)
bPro Extractor Blades®Assembly
cSpout Lids (x2)
hPitcher
iPitcher Lid with Locking Handle
j Stacked Blade Assembly
kMotor Base
l Power Cord (not shown)
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON / OFF
MARCHE
/ARRÊT
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW / DOUGH
BAS / PÂTE
f
e
g

8
ninjakitchen.com
English
The Nutri Ninja™
|
Ninja®Blender System with Auto-iQ™Technology is a professional, high powered innovative tool with
a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja
|
Ninja Blender System with
Auto-iQ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the
work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the
instructions contained in the manual before using this appliance.
Nutri Ninja™
|
Ninja®Blender System with Auto-iQ™Technology Features:
• Ninja Blade Technology
• BPA Free Pitcher, Nutri Ninja Cups, Food Processor Bowl and Lids
• Drip-Free Pour Spout
• Total Crushing™Technology
• LED Control Panel with Timer
• Sturdy, Non-Slip Base
• Smart Lid technology for easy release
• 3 speeds: Low/Dough, Medium, & High
• 5 Auto-iQ settings - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Food Puree, Nutri Ninja Auto-iQ Blend,
Nutri Ninja Auto-iQ Ultra Blend and Auto-iQ Pulse
• Nutri Ninja Nutrient & Vitamin Extraction*
* Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies
ON / OFF
MARCHE
/ARRÊT
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRA BLEND
ULTRA MÉLANGE
BLEND
MÉLANGE
LOW / DOUGH
BAS / PÂTE
1500

91-877-646-5288
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2Wash the lids, pitcher, food processor bowl, Nutri
Ninja™cups and Blade Assemblies in warm, soapy
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades.
CAUTION: Handle the Blade Assemblies with care
when washing, as the blades are very sharp.
3Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4The pitcher, food processor bowl, Nutri Ninja™cups,
lids, and Blade Assemblies, are all dishwasher safe.
It is recommended that the lids and blade assemblies
be placed on the top rack. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.
5Wipe the motor base clean with a damp cloth.

10
ninjakitchen.com
English
ASSEMBLY
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
AUTO
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
AUTO
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
Fig. 5aFig. 4Fig. 3bFig. 1 Fig. 2
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Assembly and Use of the Pitcher
Fig. 3a
OR
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the Suction Cups adhere to the
counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the right of
the “LOCK” symbol on the motor base.
4Rotate the pitcher clockwise until it clicks in place. As
the pitcher rotates, it will lower and the safety tabs on
the bottom of the pitcher will slide under the safety tabs
on the top of the motor base. (Fig. 2)
5The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“MAX” liquid mark (1.9 L) on the Pitcher.
8Holding the lid by the handle in the upright position,
place it on top of the Pitcher aligning the triangle
( ) located on the lid with the triangle ( ) located on
the Pitcher’s handle. (Fig. 5a) Press the handle down
until you hear a click. The triangles on the lid and
the blender handle MUST be aligned in order for the
blender to turn on. (Fig. 5b)
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
Pitcher and lid are not installed correctly. When
the Pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
9Plug the power cord into the electrical outlet and press
the power button ( ).
It’s best to add the liquid ingredients first and then the dry ingredients.

11 1-877-646-5288
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
Fig. 8
USE REMOVAL
Fig. 6
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
Fig. 9
ON / OFF
MARCHE
/ARRÊT
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRA BLEND
ULTRA MÉLANGE
BLEND
MÉLANGE
LOW / DOUGH
BAS / PÂTE
1500
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
Fig. 7
Fig. 10
Fig. 11
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
Assembly and Use of the Pitcher - cont.
10 Review warning and caution statements on page 10
before proceeding.
NOTE: Nutri Ninja™| Ninja® Blender with Auto-iQ™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
11 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
12 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
13 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
14 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15 Open the pour spout cap and use the spout to empty
liquid contents.
16 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
17 Make sure that the unit is unplugged when not in use.
18 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 11)

12
ninjakitchen.com
English
NOTE: Nutri Ninja™|Ninja®Blender System with Auto-
iQ™Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 2) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 3)
5The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6 Holding the desired blade assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the blade assembly is seated properly and
is standing upright. (Fig. 5)
NOTE: The blade will fit loosely on the drive gear.
7Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)
NOTE: The 1.9 L bowl is not intended for blending
drinks. Do not overfill.
9 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.
Assembly and Use of the Food Processor Bowl
ASSEMBLY
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
ON/OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
AUTO
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
AUTO
Fig. 1
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
AUTO
Fig. 6b
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully
remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of
laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential
to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 5 Fig. 6aFig. 2 Fig. 4bFig. 3
Fig. 4a
OR
ON / OFF
MARCHE
/ARRÊT
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRA BLEND
ULTRA MÉLANGE
BLEND
MÉLANGE
LOW / DOUGH
BAS / PÂTE
1500

13 1-877-646-5288
Assembly and Use of the Processor Bowl - cont.
Fig. 2 Fig. 3 Fig. 5Fig. 1 Fig. 4
REMOVALUSE
CHOPPING BLADE
ASSEMBLY
USE
DOUGH BLADE
ASSEMBLY
USING THE CHOPPING BLADE ASSEMBLY
1Review warning and caution statements on page 12
before proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3Secure the bowl onto the motor base.
4Holding the Chopping Blade Assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
8To remove the lid, press the release button on the lid
and pull the lid handle up to a 90°angle. (Fig. 2)
9Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USING THE DOUGH BLADE ASSEMBLY
1Review warning and caution statements on page 12
before proceeding to number 2.
2Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6Plug the power cord into the electrical outlet and press
on the power button ( ). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE

14
ninjakitchen.com
English
WARNING: Handle the Pro Extractor Blades®Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being
burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja cup upon completion of blending. Do not store
ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active
ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that
can pose a risk of injury. For ingredient storage in the cup, use only Spout Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
NOTE: Nutri Ninja™| Ninja® Blender with Auto-iQ™
Technology can sense which jar is on the motor base. The
available function lights will illuminate depending on which jar
is placed on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3Add ingredients to the Nutri Ninja cup.
4Place the Pro Extractor Blades®onto the cup and tightly
screw it on clockwise until you have a good seal. (Fig. 2)
5Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
6Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the
program.
7To pause the appliance, press the selected speed or Auto-iQ
program a second time. When the program is paused, the
Fig. 2 Fig. 3
Assembly and Use of the Nutri Ninja™Cups
Fig. 4 Fig. 5 Fig. 6
ASSEMBLY USE REMOVAL
light on the program button will flash until you press it again
to resume the rest of the program.
8Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the “Max Liquid” line.
9Turn the cup upright and remove the Pro Extractor Blades
Assembly by twisting the Pro Extractor Blades Assembly
counter clockwise. (Fig. 7)
10 Do not store blended contents with the Pro Extractor Blade
Assembly attached.
11 Place the spout lid onto the Nutri Ninja cup, twist to seal and
enjoy!
12 For storage, only use the spout lid to cover.
13 Make sure that the motor base is
unplugged when not in use.
14 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
Fig. 1
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
ON / OFF
MARCHE
/ARRÊT
FROZEN DRINKS
SMOOTHIES
BOISSONS CONGELÉES
FOOD PURÉE
PURÉE D’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRA BLEND
ULTRA MÉLANGE
BLEND
MÉLANGE
LOW / DOUGH
BAS / PÂTE
1500
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
Fig. 7
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE

15 1-877-646-5288
Programs, Speed Settings & Uses for the Pitcher
Programs, Speed Settings & Uses for the Food Processor Bowl
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Frozen Drinks /
Ice Crush Pitcher Stacked Blade Assembly
Auto-iQ™Frozen Drinks/
Smoothies
Ice
Frozen Drinks
Smoothies
Pureeing Pitcher Stacked Blade
Assembly Auto-iQ Food Puree
Smoothies
Soups*
Milkshakes
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Mincing Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Onion
Garlic
Herbs
Kneading and
Dough Mixing
Food Processor
Bowl
Dough Blade
Assembly Low/Dough
Bread Dough
Pie Dough
Pizza Dough
Pretzel Dough
Cookie Dough
Processing Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Food Puree
Low/Dough
Medium
High
Pâtés
Stewed Fruits
Dips
Apple Sauce
Spreads
Baby Food
Emulsifying Food Processor
Bowl
Chopping
Blade
Assembly
Low/Dough
Medium
Salad Dressings
Sauces*
Grinding Food Processor
Bowl
Chopping
Blade
Assembly
Medium Meat
Grating Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Salsa
Vegetables
Nuts
Batters Food Processor
Bowl
Dough Blade
Assembly Low/Dough Cake Mixes Batters
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja®containers
are not intended for hot blending.
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers
are not intended for hot blending.

16
ninjakitchen.com
English
Programs, Speed Settings & Uses for the Nutri Ninja™Cup
1500
WATTS
AUTO
AUTO
AUTO
AUTO
AUTO
ON/ OFF
MARCHE
/ARRÊT
FROZENDRINKS
SMOOTHIES
BOISSONSCONGELÉES
FOODPURÉE
PURÉED’ALIMENTS
MEDIUM
MOYEN
HIGH
ÉLEVÉ
PULSE
IMPULSION
ULTRABLEND
ULTRAMÉLANGE
BLEND
MÉLANGE
LOW/ DOUGH
BAS/ PÂTE
FUNCTION CONTAINER BLADE
TYPE
SPEED or
PROGRAM TYPE OF FOOD
Smoothies Nutri Ninja™Cup
Pro Extractor
Blades™
Assembly
Nutri Ninja Auto-iQ™
Blend
Smoothies
Frappes
Milkshakes
Protein Drinks
Green Smoothies Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Nutri Ninja Auto-iQ Ultra
Blend
Frozen Fruits
Frozen Vegetables
Kale
Celery
Spinach
Seeds
Ice
Grating Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Salsa
Vegetables
Nuts

17 1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, pitcher, food processor
bowl, Nutri Ninja cup, and blade assemblies in warm,
soapy water. When washing the blade assemblies, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle blade assemblies
with care to avoid contact with sharp edges. Rinse and
air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades’ edges can result in
laceration.
3 Wipe the motor base clean with a damp cloth .
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja™
|
Ninja®Blender System with
Auto-iQ™Technology upright with the blade assembly
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest
of the attachments in a safe place where they will not
be damaged and won’t cause harm. Loosely wrap the
power cord around the cord wrap on the back of the
motor base.
NOTE: Do not store blended or unblended ingredients
in the Nutri Ninja Cup with the blade assembly
attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
|
Ninja Blender System with Auto-iQ
Technology features a unique safety system which
prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If
the appliance is being overloaded, the motor
will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,
follow the resetting procedure below:
1Unplug the appliance from the electrical outlet.
2Remove and empty the container and ensure that no
food is jamming the Blade Assembly or attachments.
3Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

18
ninjakitchen.com
English
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will
flash. Unplug and wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use Auto-iQ™Pulse button for
controlled processing.
Food Collects On Lid or On the
Sides of the Container.
The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to
Counter or Table Top.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
You get an “Err” Message.
Your Ninja is able to detect which jar is on the base. You may be trying
to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.
You have a blinking red light.
The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.
Troubleshooting Guide
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: ninjaaccessories.com
or feel free to contact customer service: 1-877-646-5288.

19 1-877-646-5288
Notes