Ninja BN750 Series User manual

ninjakitchen.com
PROFESSIONAL PLUS BLENDER DUO®
WITH AUTO-IQ®
BN750
Series
OWNER’S GUIDE

3ninjakitchen.com
2ninjakitchen.com
CONTENTS
THANK YOU
for purchasing the Ninja® Professional Plus Blender Duo® with Auto-iQ®
Important Safety Instructions� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Features� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Auto-iQ® Programs for the Total Crushing® Pitcher . . . . . . . . . . . . . . . . . 10
Auto-iQ Programs for the Single-Serve Cup . . . . . . . . . . . . . . . . . . . . . . . 10
Manual Programs ...............................................11
Using the Total Crushing Pitcher � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Using the Single-Serve Cup� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Care & Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Resetting the Motor Thermostat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 1200 Watts
TIP: You can find the model and serial
numbers on the QR code label on the
back of the unit by the power cord.
RECORD THIS INFORMATION
Model Number: ��������������������
Serial Number: ���������������������
Date of Purchase: �������������������
(Keep receipt)
Store of Purchase: ������������������
REGISTER YOUR PURCHASE
registeryourninja.com
Scan QR code using mobile device

5ninjakitchen.com
4ninjakitchen.com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
4 Take inventory of all contents to ensure
you have all parts needed to properly and
safely operate your appliance.
5 Blades are sharp. Handle carefully.
6 This product is provided with a Stacked
Blade Assembly. A LWAYS exercise care
when handling blade assemblies. The blade
assemblies are sharp and are NOT locked
in place in their containers. The blade
assemblies are designed to be removable
to facilitate cleaning and replacement if
needed. ONLY grasp the blade assembly
by the top of the shaft. Failure to use care
when handling the blade assemblies will
result in a risk of laceration.
7 ALWAYS exercise care when handling
the Pro Extractor Blades® Assembly. The
blades are sharp. ONLY grasp the Pro
Extractor Blades Assembly by the outer
perimeter of the blade assembly base.
Failure to use care when handling the
blade assembly will result in a risk
of laceration.
8 Turn the appliance OFF, then unplug the
appliance from the outlet when not in use,
before assembling or disassembling parts,
and before cleaning. To unplug, grasp the
plug by the body and pull from the outlet.
NEVER unplug by grasping and pulling
the flexible cord.
9 Before use, wash all parts that may
contact food. Follow washing instructions
covered in this instruction manual.
10 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage
is suspected, contact SharkNinja to
arrange for replacement.
11 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
12 This appliance has a polarized plug (one
prong is wider than the other). To reduce
the risk of electric shock, this plug will fit
in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT modify the
plug in any way.
13 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
14 This appliance has important markings on
the plug blade. The entire supply cord is
not suitable for replacement. If damaged,
please contact SharkNinja for service.
15 Extension cords should NOT be used with
this appliance.
16 To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
17 DO NOT allow the cord to hang over the
edges of tables or counters. The cord may
become snagged and pull the appliance
o the work surface.
18 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves
and other heating appliances.
19 ALWAYS use the appliance on a dry
and level surface.
20 DO NOT allow children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
21 This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
22 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments, including canning jars, not
recommended or sold by SharkNinja may
cause fire, electric shock, or injury.
23 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container (pitcher or
cup) with the lid also in place.
24 Keep hands, hair, and clothing out of the
container when loading and operating.
25 During operation and handling of the
appliance, avoid contact with moving
parts.
26 DO NOT fill containers past the MAX FILL
or MAX LIQUID lines.
27 DO NOT operate the appliance with an
empty container.
28 DO NOT microwave any containers or
accessories provided with the appliance.
29 NEVER leave the appliance unattended
while in use.
30 DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
31 DO NOT process dry ingredients with
the Single-Serve Blending Cup and Pro
Extractor Blades® Assembly, or the pitcher
and Stacked Blade Assembly.
32 DO NOT perform grinding operations
with the Single-Serve Blending Cup
and Pro Extractor Blades® Assembly,
or the pitcher and Stacked Blade Assembly.
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�

7ninjakitchen.com
6ninjakitchen.com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
33 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
the container and lid are properly installed
before operation.
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
35 Keep hands and utensils out of containers
while chopping to reduce the risk of
severe personal injury or damage to
the blender/food chopper. A scraper
may be used ONLY when the blender or
processor is not running.
36 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
37 DO NOT open the pitcher’s pour spout
cap while blender is operating.
38 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
39 DO NOT attempt to remove the container
or lid from the motor base while the
blade assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lids and containers.
40 If the appliance overheats, a thermal
switch will activate and temporarily disable
the motor. To reset, unplug the appliance
and allow it to cool for approximately 30
minutes before using again.
41 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
42 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from the
container. Failure to remove the blade
assembly before emptying the container
results in a risk of laceration.
43 If using the pitcher’s pour spout, hold the
cover in place on the container or ensure
lid lock is engaged when pouring to avoid
risk of injury.
44 Remove the Pro Extractor Blades®
Assembly from the Single-Serve Cup
upon completion of blending.
DO NOT store ingredients before or
after blending them in the cup with the
blade assembly attached. Some foods
may contain active ingredients or release
gases that will expand if left in a sealed
container, resulting in excessive pressure
buildup that can pose a risk of injury. For
ingredient storage in the cup, use only
Spout Lid to cover.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn o the appliance and unplug the
motor base before cleaning.

9ninjakitchen.com
8ninjakitchen.com
PARTS
A
C
E
F
G
B
D
PARTS
APitcher Lid
B72 oz.* Total Crushing® Pitcher
CMotor Base
(attached power cord not shown)
DStacked Blade Assembly
ESpout Lid
FPro Extractor Blades® Assembly
G24 oz. Single-Serve Cup
*64 oz. max liquid capacity.
There are a variety of accessories that are
compatible with this blenderseries.
To purchase more accessories and find
great recipes, visit ninjakitchen.com.
NOTE: The top flap of your box shows
the select accessories that are included
with your model.
NOTE: Number of Single-Serve Cups
and Spout Lids vary by model.
1 Remove all packaging materials
from the unit. Exercise care when
unpacking blade assemblies, as the
blades are sharp.
2 The Stacked Blade Assembly is NOT
locked in place in their containers.
Handle the Stacked Blade Assembly
by grasping the top of the shaft.
3 Handle the Pro Extractor Blades®
Assembly by grasping around the
perimeter of the blade assembly base.
4 Wash containers, lids, and blade
assemblies in warm, soapy, water
using a dishwashing utensil with a
handle to avoid direct contact with
the blades. Exercise care when
handling blade assemblies, as the
blades are sharp.
5 Thoroughly rinse and air-dry
all parts.
6 Wipe control panel with a soft cloth.
Allow it to dry completely before using.
BEFORE FIRST USE
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go using
the spout lid.
NOTE: All attachments are BPA
free and dishwasher safe. It is
recommended that the containers,
lids, and blade assemblies be placed
on the top rack of the dishwasher.
Ensure blade assemblies and lids are
removed from the containers before
placing in the dishwasher. Exercise care
when handling blade assemblies.

11ninjakitchen.com
10 ninjakitchen.com
FEATURES
SMOOTHIE
Make a batch of super-smooth, sippable
drinks and shakes from fresh or frozen fruit,
liquids, and ice.
ICE CRUSH
Turn ice, juices, and fruit into expertly blended
frozen drinks.
SMOOTHIE
Make a batch of super-smooth, sippable
drinks and shakes from fresh or frozen fruit,
liquids, and ice.
ICE CRUSH
Turn ice, juices, and fruit into expertly blended
frozen drinks.
EXTRACT
Ideal for tough, leafy, or fibrous whole fruits
and vegetables, including their skins, seeds,
andstems.
AUTO-IQ PROGRAMS FOR THE
TOTAL CRUSHING® PITCHER
AUTO-IQ PROGRAMS FOR
THE SINGLE-SERVE CUP
Use the Power button to turn the unit on or o.
AUTO-IQ® PROGRAMS
Intelligent preset programs combine unique blending and pausing patterns that do the
work for you. Once a preset program is selected, it will start immediately and automatically
stop when blending is complete. To stop blending before the end of the program, press the
currently active button again.
NOTE: The unit can detect which container is installed on the motor base. Only the
functions available for a particular container will illuminate on the control panel.
NOTE: Ice Crush program is not available
on all models.
NOTE: Ice Crush program is not available
on all models.
MANUAL PROGRAMS
LOW, MEDIUM, and HIGH
When selected, each of these speeds runs
continuously until turned o. They do not
work in conjunction with any preset programs.
PULSE
Oers greater control of pulsing and blending.
Operates only when PULSE is pressed. Use
short presses for short pulses and long
presses for long pulses.

13ninjakitchen.com
12 ninjakitchen.com
1 Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
2Lower the Total Crushing Pitcher onto
the motor base. The handle should be
aligned slightly to the right and the
pitcher should be oriented so the LOCK
symbols are visible on the motor base.
Rotate the pitcher clockwise until it
clicks into place.
USING THE TOTAL CRUSHING® PITCHER
3 Exercising care, grasp the Stacked Blade
Assembly by the top of the shaft and
place it onto the drive gear inside the
pitcher. Note that the blade assembly
will fit loosely onto the drive gear.
4Add ingredients to the pitcher. DO NOT
add ingredients past the MAX LIQUID
line on the pitcher.
5Place the lid on the pitcher, aligning
the triangle symbol on the lid with the
triangle symbol on the handle. Press
down on the handle until it clicks into
place. The triangle symbols MUST be
aligned for the lid to lock and the unit
to operate. Once the lid is locked in place,
press the Power button to turn unit
on. The available program buttons will
illuminate and the unit will be ready for use.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: Auto-iQ® programs have pauses and
changes in speed throughout the cycle.
NOTE: DO NOT add ingredients before
completing installation of the Stacked
Blade Assembly.
NOTE: If the Stacked Blade Assembly is
not fully seated, you will not be able to
install and lock the lid.
6a If using an Auto-iQ® program, first select
the program that best suits your recipe.
The preset feature will automatically
stop at the end of the program. To stop
the unit at any time, press the currently
active button again.
6b If using a manual program, select your
desired speed. Once the ingredients have
reached your desired consistency, press
the active button again, and wait for the
unit to come to a complete stop.
7To remove the pitcher from the motor
base, turn the pitcher counterclockwise
and then lift up.
8a To pour out thinner mixtures, ensure the
lid is locked in place, then open the pour
spout cap.
IMPORTANT: As a safety feature, if the
pitcher and lid are not properly installed,
the motor will be disabled. If this happens,
repeat step 5 on the following page.When
the pitcher and lid are properly installed,
the program button LEDs will illuminate,
indicating the appliance is ready to use.
8b For thicker mixtures that cannot be
emptied through the pour spout, remove
the lid and Stacked Blade Assembly
before pouring. To remove the lid, press
the RELEASE button and lift the handle.
To remove the blade assembly, carefully
grasp it by the top of the shaft and pull
straight up. The pitcher can then be
emptied.
9 Turn the unit o by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
NOTE: If the unit is plugged in and powered
on, but the pitcher is not installed, the LEDs
on the control panel will flash.
NOTE: The pitcher lid handle will not fold
down unless it is attached to the pitcher.

15ninjakitchen.com
14 ninjakitchen.com
1 Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
2 Add ingredients to the Single-Serve Cup.
DO NOT add ingredients past the MAX
LIQUID line on the cup.
3 Install the Pro Extractor Blades®
Assembly onto the top of the cup. Twist
the lid clockwise until it’s sealed tightly.
4 Turn the cup upside down and install on
the motor base. Align the tabs on the cup
with the slots on the base, then rotate
cup clockwise until it clicks into place.
Once the cup is locked in place, press
the Power button to turn unit on. The
available program buttons will illuminate
and the unit will be ready for use.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: Preset programs have pauses and
changes in speed throughout the cycle.
USING THE SINGLE-SERVE CUP
5a If using an Auto-iQ® program, first select
the program that best suits your recipe.
The preset feature will automatically
stop at the end of the program. To stop
the unit at any time, press the currently
active program again.
5a If using a manual program, select your
desired speed. Once the ingredients have
reached your desired consistency, press
the active button again, and wait for the
unit to come to a complete stop.
6 To remove the cup from the motor
base, turn the cup counterclockwise
and then lift up.
7 Remove the Pro Extractor Blades®
Assembly by twisting the cap
counterclockwise. DO NOT store
blended contents with Pro Extractor
Blades Assembly attached. Exercise
care when handling the blade
assembly, as the blades are sharp.
8 Turn the unit o by pressing the
Power button. Unplug the unit
when finished. Refer to the Care &
Maintenance section for cleaning and
storage instructions.
9 To enjoy your drink on the go, place
the Spout Lid onto the Single-Serve
Cup and twist lid clockwise until firmly
sealed. For storing ingredients in the
cup, use only the Spout Lid to cover.
NOTE: If the unit is plugged in and
powered on, but the cup is not installed,
the LEDs on the control panel will flash.

17ninjakitchen.com
16 ninjakitchen.com
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash all containers in
warm, soapy water with a soft cloth.
• Hand-Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with
the blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
• Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers,
and blade assemblies be placed on the
top rack of the dishwasher ON LY. Ensure
the blade assemblies are removed from
their containers before placing in the
dishwasher. Exercise care when handling
blade assemblies.
• Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor base
with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
STORING
Wrap the power cord around the cord wrap
on the back of the motor base. Store the
unit upright and store all blade assemblies
inside or attached to their respective
containers with their lids locked in place.
DO NOT store blended or unblended
ingredients in the Single-Serve Cup with the
Pro Extractor Blades® assembly attached.
DO NOT stack items on top of the
containers. Store any remaining attachments
alongside the unit or in a cabinet where they
will not be damaged or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1 Unplug the unit from the electricaloutlet.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container’s lid and blade
assembly. Empty the container and ensure
no ingredients are jamming the blade
assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
So we may better assist you, please register
your product online at registeryourninja.com
and have the product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjaaccessories.com.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting�
The LEDs on the control panel are flashing�
•If the unit is plugged in and powered on, but there is no container installed, the LEDs on the
control panel will flash. Install a container and the available program buttons will illuminate,
indicating the unit is ready for use.
The Manual Program LEDs (Low, Medium, High, Pulse) are flashing�
•If Low, Medium, High, and Pulse LEDs are flashing, unplug the unit from the electrical outlet
and allow it to cool for 30 minutes. Remove the container’s lid and blade assembly and
empty the contents to ensure no ingredients are jamming the blade assembly.
Lid/Pro Extractor Blades® Assembly is hard to install on the cup�
•Set the cup on a level surface. Carefully place the lid or Pro Extractor Blades Assembly on
the top of the cup and align the threads so the lid/Pro Extractor Blades Assembly sits flat
on the cup. Twist clockwise until you have a tight seal.
Unit doesn’t mix well; ingredients get stuck�
•Using the Auto-iQ® programs is the easiest way to achieve great results. The pulses
and pauses allow the ingredients to settle toward the blade assembly. If ingredients are
routinely getting stuck, adding some liquid will usually help.
•When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs. Next add
liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.
Unit moves on counter while blending�
•Make sure the surface and feet of the unit are clean and dry.
Preset program will not work�
•The unit can detect which container is on the motor base. You may be trying to use a
program that is not designed for the container you have installed. The programs will light up,
indicating which programs are available for each container.
Unit doesn’t create snow from solid ice�
•DO NOT use ice that has been sitting out or has started to melt. Use ice straight from
the freezer.
•Start with a few pulses and then use a continuous blending cycle.
The pitcher lid handle will not fold down�
•If not attached to the pitcher, the handle will not fold down. For storage, place the lid on the
pitcher and press down on the handle until it clicks into place.

19ninjakitchen.com
18 ninjakitchen.com
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original
product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for
a period of one (1) year from the date of purchase when it is used under normal household
conditions and maintained according to the requirements outlined in the Owner’s Guide,
subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months
following the receipt date of the replacement unit or the remainder of the existing
warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of
equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, blades, blender
bases, etc.), which require regular maintenance and/or replacement to ensure the
proper functioning of your unit, are not covered by this warranty. Replacement parts are
available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and other
debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include
damages caused in the process of shipping, altering, or repairing the SharkNinja product
(or any of its parts) when the repair is performed by a repair person not authorized by
SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, visit ninjakitchen.com/support for product care and maintenance
self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist
with product support and warranty service options, including the possibility of upgrading to
our VIP warranty service options for select product categories. So we may better assist you,
please register your product online at registeryourninja.com and have the product on hand
when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships the
repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of
purchase. We also ask that you register your product online at registeryourninja.com and have
the product on hand when you call, so we may better assist you. A Customer Service Specialist
will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY
NOTES

SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen�com
Illustrations may dier from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are
subject to change withoutnotice.
AUTO-IQ, BLENDER DUO, NINJA, PRO EXTRACTOR BLADES, and TOTAL CRUSHING
are registered trademarks of Shark Ninja Operating LLC.
For SharkNinja U.S. patent information, visit sharkninja.com/uspatents/
© 2020 SharkNinja Operating LLC
PRINTED IN CHINA
BN750Series�IB�EN�MP�Mv12 @ninjakitchen