Ninja CT682SM Series User manual

Intelli-Sense
Kitchen System
www.ninjakitchen.sg | ninjakitchen.my
CT682SM
Series
OWNER’S GUIDE

CONTENTS
THANK YOU
for purchasing the Ninja™ Intelli-Sense Kitchen System
Important Safety Instructions� � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Getting to Know Your Ninja™
Intelli-Sense Kitchen System� � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Features� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Total Crushing Pitcher � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �10
Single-Serve Cup� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
Precision Processor Bowl � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �12
Using Your Total Crushing Pitcher � � � � � � � � � � � � � � � � � � � � � � 13
Using Your Single-Serve Cup� � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Using Your Precision Processor Bowl � � � � � � � � � � � � � � � � � � � 21
Assembling Your Auto-Spiralizer � � � � � � � � � � � � � � � � � � � � � � � 25
Using Your Auto-Spiralizer � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27
Care & Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 31
Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �31
Storing� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �31
Resetting the Motor Thermostat� � � � � � � � � � � � � � � � � � � � � � � � � � �31
Ordering Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �31
Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 32
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 34
PLEASE READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE�
These instructions are designed to help youget a complete
understanding of your newNinja Intelli-Sense Kitchen System.
If you have any questions, please call our Customer Service
line at +SG [phone] MY [phone].
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Watts: 1200W
TIP: You can find the model
and serial numbers on the
label located near the rating
label.
RECORD THIS INFORMATION
Model Number: ��������������������������������������
Serial Number: ��������������������������������������
Date of Purchase (Keep receipt): �����������������������
Store of Purchase: �����������������������������������
REGISTER YOUR PURCHASE
ninjakitchen.sg | ninjakitchen.my
SG [phone] | MY [phone]
This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical
and electronic equipment (WEEE).
This marking indicates this product should not be disposed of with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material sources. To return your used device, please use the return and collection
systems or contact the retailer where this product was purchased. They can take this product for
environmentally safe recycling.
This appliance complied with the European directives for electromagnetic, compatibility (EMC)
2014/30/EU and its revisions, as well as Low Voltage Directive (LVD) 2014/35/EU and its revisions.
1 2
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

SAVE THESE INSTRUCTIONS
1Read all instructions prior to using the
appliance and its accessories.
2Carefully observe and follow all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3This product is provided with a Stacked
Blade Assembly. ALWAYS exercise
care when handling the Stacked Blade
Assembly. The Stacked Blade Assembly is
sharp and is NOT locked to the container.
It is designed to be removable to facilitate
cleaning and replacement if needed.
ALWAYS grasp the Stacked Blade
Assembly by the top of the shaft. Failure to
use care when handling the Stacked Blade
Assembly will result in a risk of laceration.
4Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades that
can cause injury if mishandled.
5Take inventory of all contents to ensure you
have all parts needed to properly and safely
operate your appliance.
6Blades are sharp. Handle carefully.
7Turn the appliance OFF, then unplug the
appliance from the outlet when not in use,
before assembling or disassembling parts,
and before cleaning. To unplug, grasp the
plug by the body and pull from the outlet.
NEVER unplug by grasping and pulling the
flexible cord.
8Before use, wash all parts that may contact
food. Follow washing instructions covered
in this instruction manual.
9To protect against the risk of electric shock,
DO NOT submerge the appliance or allow
the power cord to contact any form of liquid.
10 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
11 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact Ninja Kitchen for servicing.
12 Extension cords should not be used with
this appliance.
13 DO NOT allow young children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
14 This appliance is NOT intended to be used
by people with reduced physical, sensory,
or mental capabilities, or lack of experience
and knowledge, unless they are given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety.
15 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage
is suspected, contact Ninja Kitchen to
arrange for replacement.
16 DO NOT attempt to sharpen blades.
17 DO NOT allow the cord to hang over the
edges of tables or counters. The cord may
become snagged and pull the appliance off
the work surface.
18 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves and
other heating appliances.
19 ALWAYS use the appliance on a clean,
dry, level surface.
20 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container and lid.
21 Keep hands, hair, and clothing out of the
container when loading and operating.
22 ONLY use attachments and accessories
that are provided with the product or are
recommended by Ninja Kitchen. The use of
attachments not recommended or sold by
SharkNinja may cause fire, electric shock,
or injury.
23 During operation and handling of the
appliance, avoid contact with moving parts.
CONTINUED ON PAGE 5
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of fire, electric shock, serious injury, death, or damage when
using this appliance, follow these basic safety precautions�
SAVE THESE INSTRUCTIONS
3 4
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

24 DO NOT operate the appliance with an
empty container.
25 DO NOT fill containers past the max fill or
max liquid lines.
26 DO NOT microwave any containers or
accessories provided with the appliance.
27 Before operation, ensure all utensils are
removed from containers. Failure to remove
utensils can cause containers to shatter
and potentially result in personal injury and
property damage.
28 Keep hands and utensils out of containers
while chopping to reduce the risk of severe
personal injury or damage to the blender/
food chopper. A scraper may be used
ONLY when the blender or processor is
not running. When using the processor,
always use food pusher to add food.
NEVER add food by hand.
29 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
the container and lid are properly installed
before operation.
30 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
31 NEVER leave the appliance unattended
while in use.
32 DO NOT open pour spout cover while
blender is operating.
33 DO NOT blend hot liquids. Doing so may
result in a pressure buildup and steam
exposure that can pose a risk of the user
being burned.
SAVE THESE INSTRUCTIONS
34 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a scraper or
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
35 DO NOT attempt to remove the container
and lid from the motor base while the
motor and Stacked Blade Assembly are still
spinning. Allow the appliance to come to a
complete stop before removing the lid and
pitcher.
36 Upon completion of blending, ensure
the Stacked Blade Assembly is removed
BEFORE emptying pitcher contents. The
Stacked Blade Assembly is to be removed
by grasping the top of the shaft and lifting
from the pitcher. Failure to remove the
Stacked Blade Assembly before emptying
the pitcher can result in a risk of laceration.
37 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately
15 minutes before using again.
38 The maximum wattage rating for this
appliance is based on the configuration
of the Stacked Blade Assembly and Total
Crushing Pitcher. Other configurations may
draw less power or current.
39 DO NOT spray the motor base or
touchscreen with water or other liquids.
40 Turn off the appliance and unplug the
motor base before cleaning.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of fire, electric shock, serious injury, death, or damage when
using this appliance, follow these basic safety precautions�
5 6
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

GETTING TO KNOW YOUR NINJA™
INTELLI-SENSE KITCHEN SYSTEM
WELCOME!
Congratulations on
your purchase. Use this
instruction manual to learn
about the great features
of your Ninja Intelli-Sense
Kitchen System. From
assembly to use to
maintenance, you will find
it all in here.
MAIN UNIT
APitcher Lid
B72 oz. Total Crushing Pitcher*
CStacked Blade Assembly
DMotor Base with Smart Vessel Recognition
E24 oz. Single-Serve Cup
FSpout Lid
GPro Extractor Blades Assembly
HPrecision Processor Bowl Lid
IDough Blade Assembly
J Chopping Blade Assembly
KPrecision Processor Bowl**
LSpiralizer Food Pusher
MFeed Chute Lid
NCollecting Bowl
OSpiralizer Bowl
PSpaghetti Blade Disc
Q Fettuccine Blade Disc
RCleaning Brush
There are a variety of
accessories that are compatible
with this blenderseries.
NOTE: The top flap of
your box shows the select
accessories that are
included with your model.
To find great recipes and
purchase more accessories
(including more Blade Discs
for creating different types
of noodles) please visit
ninjaaccessories.com
If you have any questions,
concerns or feedback, we’d
love to hear from you. Give
us a call at SG [phone]
5111 or MY [phone]
915 or visit ninjakitchen.sg or
ninjakitchen.my
*64 oz. max liquid capacity.
**3.5 cups max capacity/
15 oz. max liquid capacity.
A
B
D
C K
I
H L P
Q
R
M
N
O
J
E F
G
7 8
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

FEATURES
DID YOU KNOW?
• You can take your drinks on
the go using the Spout Lid.
• All containers, blade
assemblies, blade discs,
and lids are BPA free.
• Our containers, blade
assemblies, and lids are all
dishwasher safe.
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
BEFORE FIRST USE
1Remove all packaging materials from the appliance.
Exercise care when unpacking blade assemblies and Blade
Discs. All blade assemblies and Blade Discs are sharp.
2 The Chopping Blade Assembly and Stacked Blade
Assembly are NOT locked in place in their containers.
Handle the Chopping Blade Assembly and Stacked Blade
Assembly by grasping the top of the shaft.
3 Handle the Pro Extractor Blades Assembly by grasping
around the perimeter of the blade assembly base.
4 Wash containers, lids, Blade Discs, and blade assemblies
in warm, soapy, water using a dishwashing utensil with
a handle or the provided cleaning brush to avoid direct
contact with the blades. Exercise care when handling blade
assemblies, as the blades are sharp.
5 Thoroughly rinse and air-dry all parts.
6 All attachments are dishwasher safe. It is recommended
that the lids, Blade Discs, and blade assemblies be placed
on the top rack of the dishwasher. Ensure blade assemblies
and Blade Discs are removed from their containers before
placing in the dishwasher. Exercise care when handling
blade assemblies or Blade Discs.
7 Wipe touchscreen with a soft cloth. Allow it to dry
completely before using.
SMOOTHIE
Make super-smooth, sippable drinks and
shakes from fresh or frozen fruit, liquids,
and ice.
ICE CREAM
Create delicious and scoop-able frozen
desserts like ice cream or sorbet.
FROZEN DRINK
Turn ice, juices, and fruit into expertly
blended frozen drinks.
SNOW CONE
Pulverize ice into frozen creations like snow
cones, slushies, or granitas.
LOW, HIGH, and PULSE
When selected, each of these programs runs continuously until turned off. They do not work
in conjunction with any pre-set programs.
SMART PROGRAMS FOR THE TOTAL CRUSHING PITCHER
Intelligent pre-set programs combine unique blending and pausing patterns that do the work for
you. Once a pre-set program is selected, it will start immediately. Press STOP to end it.
The power symbol should be used to turn your appliance on or off.
9 10
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

FEATURES - CONT�
PUREE
Create anything from silky smooth sauces
to the perfect hummus.
DOUGH
Ideal for creating delicious dough for pizza,
bread, and baked goods like cookies.
CHOP
Timed pulses and pauses to give you
consistent chopping results.
DIPS
Use for dips and sides with more
texture like spinach and artichoke dip
or mashed potatoes.
LOW, HIGH, and PULSE
When selected, each of these programs runs continuously until turned off. They do not work
in conjunction with any pre-set programs.
SMOOTHIE
Make super-smooth, sippable drinks and
shakes from fresh or frozen fruit, liquids,
and ice .
REFRESHER
Add natural veggie, fruit, and herb flavors
to your water.
EXTRACT
Ideal for tough, leafy, or fibrous whole
fruits and vegetables, including their skins,
seeds, andstems.
DRESSING
Create fresh marinades, dressings,
and sauces.
LOW, HIGH, and PULSE
When selected, each of these programs runs continuously until turned off. They do not work
in conjunction with any pre-set programs.
SMART PROGRAMS FOR THE SINGLE-SERVE CUP
Intelligent pre-set programs combine unique blending and pausing patterns that do the work
for you. Once a pre-set program is selected, it will start immediately. Press STOP to end it.
The power symbol should be used to turn your appliance on or off.
SMART PROGRAMS FOR THE PRECISION PROCESSOR BOWL
Intelligent pre-set programs combine unique blending and pausing patterns that do the work for
you. Once a pre-set program is selected, it will start immediately. Press STOP to end it.
The power symbol should be used to turn your appliance on or off.
11 12
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

1 Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Ensure the motor base is
connected to power.
2 Lower the Total Crushing
Pitcher onto the motor
base. The handle should
be aligned slightly to the
right and the pitcher should
be oriented so the LOCK
symbols are visible on the
motor base. Then rotate
the pitcher clockwise until it
clicks into place.
TIP: If the Stacked Blade
Assembly is not fully
seated, you will not be
able to install and lock the
lid into position.
TIP: To learn more about
the unit’s programs, refer
to page 10.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
NOTE: DO NOT add
ingredients before completing
installation of the Stacked
Blade Assembly.
NOTE: The pitcher can only
be installed in one orientation.
The handle must be
positioned on the front-right
corner of the motor base to
operate the appliance.
USING YOUR TOTAL CRUSHING PITCHER
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
3Exercising care, grasp the
Stacked Blade Assembly
by the top of the shaft and
place it onto the drive gear
inside the pitcher. Note
that the blade assembly
will fit loosely onto the
drive gear.
4Add ingredients, making
sure to not exceed the
Max Fill line marked on the
side of the pitcher.
5Place the lid on the pitcher, aligning the triangle symbol
located on the lid with the triangle symbol located on the
pitcher’s handle. Press down on the handle until it clicks
into place. The triangle symbols MUST be aligned for the lid
to lock onto place and the unit to operate. When the unit is
connected to power and the container is correctly locked
into the motor base, press the Power symbol to turn unit
on. The available program buttons will illuminate and the
unit will be ready for use.
13 14
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
IMPORTANT: As a safety
feature, if the pitcher
and lid are not properly
installed, the timer will
display “- --” and the
motor will be disabled. If
this happens, repeat step
5 on page 14. When the
pitcher and lid are properly
installed, the program
buttons will illuminate
steadily, indicating the
appliance is ready for use.
6If using a pre-set program,
first select the program
that best suits your recipe.
The pre-set feature will
automatically stop the unit
at the end of the program.
To pause the appliance
at any time, press the
currently active button a
second time. Reference
page 10 for program
descriptions.
7If not using a pre-set
program and ingredients
have reached your desired
consistency, stop the
appliance by releasing the
manual speed button, and
wait for the appliance to
come to a complete stop.
8 To remove the pitcher from
the motor base, turn the
pitcher counterclockwise
and lift it up.
NOTE: Smart Vessel
Recognition can detect
which container is on the
motor base. Only the functions
available for that particular
container will illuminate on
the touchscreen.
USING YOUR TOTAL CRUSHING PITCHER - CONT�
9To pour out thinner
mixtures, ensure the lid is
locked in place, then open
the pour spout cap.
10 For thicker mixtures
that cannot be emptied
through the pour spout,
remove the lid and
Stacked Blade Assembly
before pouring. To
remove the lid, press the
RELEASE button and lift
the handle. To remove the
blade assembly, carefully
grasp it by the top of the
shaft. The pitcher can then
be emptied.
11 Unplug the unit when
finished. To release the
motor base, place your
hands underneath both
sides of the motor base
and gently pull the unit
up and toward you. Refer
to page 31 for storing
instructions.
15 16
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

USING YOUR
SINGLE-SERVE CUP
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
1Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into
a wall outlet.
2Add ingredients to the
Single-Serve Cup. DO
NOT add ingredients past
the MAX LIQUID line on
the cup.
3Install the Pro Extractor Blades Assembly
onto the top of the cup. Twist the lid
clockwise until it’s sealed tightly.
4Turn the Single-Serve Cup upside down
and install onto the motor base. Align
the tabs on the cup with the slots on the
base, then twist until it clicks into place.
When the unit is connected to power
and the container is correctly locked onto
the motor base, press the Power symbol
to turn unit on. The available program
buttons will illuminate and the unit will be
ready for use.
TIP: To learn more about
the unit’s programs, refer
to page 11.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
17 18
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
5If using a pre-set program,
first select the program
that best suits your recipe.
The pre-set feature will
automatically stop the unit
at the end of the program.
To pause the appliance
at any time, press the
currently active program
a second time. Reference
page 11 for program
descriptions.
NOTE: Smart Vessel
Recognition can detect
which container is on
the motor base. Only the
functions available for
that’ particular container
will illuminate on the
touchscreen.
6To remove the cup from the
motor base, turn the cup
counterclockwise and then
lift it.
7Remove the Pro Extractor
Blades Assembly by
twisting the cap counter-
clockwise. Do not store
blended contents with Pro
Extractor Blades Assembly
attached. Exercise care
when handling the blade
assembly, as the blades
are sharp.
8Unplug the unit when
finished. To release the
motor base, place your
hands underneath both
sides of the motor base
and gently pull the unit
up and toward you. Refer
to page 31 for storing
instructions.
9To enjoy your drink on the
go, place the Spout Lid
onto the Single-Serve Cup
and twist lid clockwise until
firmly sealed. For storing
ingredients in the cup, use
only the Spout Lid to cover.
USING YOUR
SINGLE-SERVE CUP - CONT�
19 20
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

TIP: If the blade assembly
is not fully seated, you will
not be able to install and
lock the lid into position.
TIP: To learn more about
the unit’s programs, refer
to page 12.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
NOTE: DO NOT add
ingredients before installing
the blade assembly.
USING YOUR PRECISION PROCESSOR BOWL
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
1 Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into a
wall outlet.
2Lower the Precision
Processor bowl onto the
motor base.
3 Rotate Precision Processor
bowl clockwise until it
clicks into place.
4Exercising care, grasp the
Chopping Blade Assembly
by the top of the shaft
and place it onto the drive
gear inside the bowl. Note
that the Chopping Blade
Assembly will fit loosely
onto the drive gear.
5Add ingredients to the
bowl, making sure not to
exceed the MAX LIQUID
and MAX FILL lines.
21 22
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
NOTE: Please follow the
same instructions to install the
Dough Blade Assembly.
NOTE: Smart Vessel
Recognition can detect which
container is on the motor
base. Only the functions
available for that particular
container will illuminate on
the touchscreen.
USING YOUR
PRECISION PROCESSOR BOWL - CONT�
6Place lid on Precision
Processor Bowl, with
black line on tab aligned
slightly to the right of tab
on front of bowl. Turn lid
clockwise to lock in place.
When properly locked,
the white line on lid will
line up with the black line
on bowl. When the unit is
connected to power and
the container is correctly
locked onto the motor
base, press and hold
Power symbol to turn
unit on. The available
program buttons will
illuminate and the unit
will be ready for use.
7If using a pre-set program,
first select the program
that best suits your recipe.
The pre-set feature will
automatically stop the
appliance at the end of
the program. To pause the
unit at any time, press the
currently active program
a second time. Reference
page 12 for program
descriptions.
8To remove the bowl from
the motor base, turn the
bowl counterclockwise
and then lift it.
9Remove the lid by pressing
the release button on the
front tab, twisting the lid
counterclockwise, and
lifting up. Always remove
the Chopping Blade
Assembly before emptying
any of the ingredients in
the bowl. To remove the
Chopping Blade Assembly,
carefully grasp it by the top
of the shaft and lift it out of
the bowl.
10 Unplug the unit when
finished. To release the
motor base, place your
hands underneath both
sides of the motor base
and gently pull the unit
up and toward you.
Refer to page 31 for
storing instructions.
23 24
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

ASSEMBLING YOUR
AUTO-SPIRALIZER
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
IMPORTANT: As a
safety feature, if the
Spiralizer Bowl and
Feed Chute Lid are not
properly installed, the
timer will display “- --”
and the motor will
be disabled.
NOTE: To fit properly, the
tabs on the sides of the
Blade Disc must align with
the gaps on the top of the
Collecting Bowl.
NOTE: The Spiralizer
accessory is only intended
for processing of fruit and
vegetables. Processing hard
ingredients such as cheese,
meats, and dried foods is
not recommended.
1 Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into a
wall outlet.
2Lower the Spiralizer Bowl
onto the motor base.
3Rotate the Spiralizer Bowl
clockwise until it clicks into
place.
4Place the Collecting Bowl inside the
Spiralizer Bowl, aligning it over the gear post.
5Choose your Blade Disc, making sure to
handle it carefully.
6Install the Blade Disc onto the top of the
Collecting Bowl. The rim of the Blade Disc
should sit flush against the top of the bowl,
and the tabs on the sides of the Blade
Discs must align with the slots on the top
of the Collecting Bowl.
7Assemble the Feed Chute Lid on top of
the Spiralizer Bowl. Turn the lid clockwise
onto the Spiralizer Bowl, aligning the gray
tabs on the lid with the front of the bowl.
When the unit is connected to power and
the container is correctly assembled onto
the motor base, press the Power symbol to
turn unit on. The GO button will illuminate,
indicating the unit is ready for use.
25 26
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

USING YOUR
AUTO-SPIRALIZER
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
IMPORTANT: After
spiralizing an ingredient,
all leftover pieces must
be removed from the
Collecting Bowl and
Blade Disc before
spiralizing again.
NOTE: To find out how
to properly prep your
ingredient, refer to the
Food Prep section in your
Quick Start Guide or your
Inspiration Guide.
NOTE: Never spiralize
multiple ingredients at
one time.
1Before spiralizing, prepare
your ingredient by cutting
it so it is no more than
3 inches wide. Place the
prepped ingredient into the
Feed Chute, through the
opening at the top.
2Center the ingredient
on the pin in the center
of the Blade Disc, then
push down, securing the
ingredient onto the pin.
3Place the Food Pusher on
top of the ingredient and
press down firmly to hold
in place.
4Select GO to begin
spiralizing. Continue to
press firmly with Food
Pusher to guide ingredient
through Feed Chute.
5Spiralizing is complete
when the Food Pusher sits
flat atop the Feed Chute
Lid. Press STOP to power
off the motor.
27 28
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

USING YOUR
AUTO-SPIRALIZER - CONT�
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
6To remove the Spiralizer
Bowl from the motor
base, turn the bowl
counterclockwise and lift.
7To remove the Feed
Chute Lid, press the
release button on the
left side of the front
tab, then twist the lid
counterclockwise and lift.
8Remove the Collecting
Bowl by lifting it out of the
Spiralizer Bowl. Remove
the Blade Disc by gripping
the handles on the side of
the disc and lifting.
9Remove the noodles from
the Collecting Bowl and
prepare as desired.
10 Unplug the appliance
when finished. To release
the motor base, place
your hands underneath it
and gently pull it toward
you. Refer to page 31 for
storing instructions.
29 30
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn
power o and unplug unit before troubleshooting�
Unit doesn’t turn on�
• Make sure unit is plugged in.
• Display will read “- --” once connected to power.
• Place container on base and rotate it clockwise until it clicks into place. Press the Power symbol to turn
unit on, and the available programs will illuminate indicating the unit is ready for use. Available programs
will illuminate indicating the unit is ready for use.
Unit doesn’t turn o�
• Remove container from base by rotating it counterclockwise and lifting it. Display should turn off. Unplug
the power cord from the outlet.
Lid/Pro Extractor Blades Assembly is hard to install on the cup�
• Set the cup on a level surface. Carefully place the lid or Pro Extractor Blades Assembly on the top of the
cup and align the threads so the lid/Pro Extractor Blades Assembly sits flat on the cup. Twist clockwise
until you have a tight seal.
Food is not evenly chopped�
• For best results when chopping, cut pieces down to even sizes and do not overfill the Precision
Processor™bowl.
Doesn’t mix well; ingredients get stuck�
• Using the pre-set programs is the easiest way to achieve great results. The pulses and pauses allow the
ingredients to settle toward the blade assembly. If ingredients are routinely getting stuck, adding some
liquid will usually help.
• When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs. Next add liquids or
yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.
Motor base won’t stick to counter or tabletop�
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces.
• Suction feet WILL NOT stick on some surfaces such as wood, tile, and non-polished finishes.
• DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure (cutting board,
platter, plates, etc.).
Unit is dicult to remove from counter for storage�
• Place your hands underneath both sides of the motor base and gently pull the unit up and toward you.
You get a blinking “- --” Message
• Smart Vessel Recognition can detect which container is on the motor base. You may be trying to use a
program that is not designed for the container you have installed. The programs will light up, indicating
which programs are available for each container.
You cannot create snow from solid ice�
• Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
• Start with a few pulses and then go to a continuous blending cycle.
You get semi-circular or shredded noodles�
• If the Collecting Bowl is overfilled, causing the Blade Disc to lift up after spiralizing, your ingredient may
have been too large. Make sure to trim and prepare your ingredients properly before spiralizing by
following the instructions in the Food Prep section in your Quick Start Guide or Inspiration Guide.
• For the most consistent results, be sure to center the ingredient onto the pin located in the center of the
Blade Disc. (Refer to page 27, step 2).
Ingredient is not fully processed and is spinning below the pusher�
• Remove remaining ingredient from Blade Disc pin and trim top and bottom so that both are flat. Make
sure you center ingredient on the Blade Disc pin and secure the food pusher firmly on top of the
ingredient. While maintaining pressure on food pusher, press the GO button to begin spiralizing.
CARE & MAINTENANCE
CLEANING
1Separate all parts.
2Wash all containers in warm, soapy water
with a soft cloth.
3Hand-Washing
Wash blade assemblies and Blade Discs
in warm, soapy water using a dishwashing
utensil with a handle or the provided
cleaning brush to avoid direct contact with
the blades. Exercise care when handling
when handling blade assemblies and Blade
Discs as the blades are sharp. Thoroughly
rinse and air-dry all parts.
Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers,
Blade Discs, and blade assemblies be placed
on the top rack of the dishwasher ONLY.
Ensure the when handling blade assemblies
and Blade Discs are removed from their
containers before placing in the dishwasher.
Exercise care when handling when handling
blade assemblies and Blade Discs.
Motor Base
Turn off the unit and unplug the motor base
before cleaning. Wipe motor base with a
clean, damp cloth.
Clean the touchscreen with a soft cloth,
such as microfiber, to prevent scratching. To
remove residue from the touchscreen, you
may use an all-purpose cleaner.
NEVER spray the base or touchscreen with
water or other liquids.
DO NOT use abrasive cloths/pads/brushes
to clean the base or touchscreen, as this
can dull or scratch the surface.
STORING
Wrap the power cord around the cord wrap
on the back of the motor base. Store the unit
upright and store all blade assemblies inside or
attached to their respective containers with their
lids locked into place.
DO NOT store blended or unblended
ingredients in the Single-Serve Cup with the Pro
Extractor Blades Assembly attached.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside
the unit or in a cabinet where they will not be
damaged or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and drive
system should you inadvertently overload
it. If the unit is overloaded, the motor will be
temporarily disabled. Should this occur, follow
the reset procedure below.
1 Unplug the unit from the electricaloutlet.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container’s lid and blade
assembly. Empty the container and ensure no
ingredients are jamming the blade assemblies.
4 Reset the unit in accordance with the
applicable instructions for the container
and blade type.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at SG [phone]
or5111 MY [phone]
ORDERING REPLACEMENT PARTS
To order additional parts and
attachments, contact Customer Service at
SG [phone] MY [phone]
31 32
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

NOTES
The warranty commences on the date of purchase and expires at the end of the 1 year period.
In the unlikely event of a defect due to faulty materials or workmanship within the guarantee
period we will replace the defective/faulty part with a new product, free of charge, or if the unit
is deemed defective/faulty we replace the unit with an equivalent or upgraded model, at our
discretion.
For warranty claims, you will need to submit a proof of purchase in the form of a valid receipt
that displays date and place of purchase.
Replacement items will be covered by the limited warranty for the balance of the warranty
period from the date of the original purchase. Please note:
Your warranty is subject to the following conditions
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been
dropped, damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance
on your own. If the supply cord is damaged, it must be replaced by a qualified
electrician to avoid a hazard. Incorrect re-assembly or repair can cause a risk of electric
shock or injury to persons when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or repaired by
anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional or hire purposes.
• The item has not sustained damage through foreign objects, substances or accident
• Accidental damage
• Damage as a result of use not in accordance with the rating plate
• Use of parts and accessories that are not genuine Ninja components
Customer costs within warranty
The customer is responsible for any inwards freight charge to return a product for warranty
if requested, and outward freight charge for warranty parts and or replacement unit.
Who is covered?
This warranty applies only to the original purchaser, who bought the product from an
authorised retailer and may not be transferred. Proof of purchase is required.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships the
repaired or replacement unit.
What is not covered?
• Accessories supplied with the item.
• Components that are subject to natural wear and tear caused by normal use in accordance
with operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
ONE (1) YEAR LIMITED WARRANTY
33 34
SG [phone] | MY [phone] ninjakitchen.sg | ninjakitchen.my

Illustrations may differ from actual product. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to change
without notice.
NINJA is a trademark of SharkNinja Operating LLC.
For SharkNinja U.S. patent information, visit sharkninja.com/uspatents.
© 2019 SharkNinja Operating LLC
CT682SM�IB�MP�Mv1
PRINTED IN CHINA / IMPRIMÉ EN CHINE / IMPRESO EN CHINA
Mann & Noble Asia Pte� Ltd�
600 North Bridge road, #23-01
Parkview Square, Singapore 188778
ninjakitchen.sg | ninjakitchen.my