Ninja Foodi POWER NUTRI DUO SS101Q User manual

ninjakitchen.com
SS101Q
Series
OWNER’S GUIDE
FOODITM POWER NUTRI™ DUO®

2ninjakitchen.com 3ninjakitchen.com
CONTENTS
THANK YOU FOR PURCHASING
The Ninja® Foodi™Power Nutri™ Duo®
Important Safeguards � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Getting to Know Your Ninja® � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Parts� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Before First Use� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Getting to know the Power Nutri™ Bowl . . . . . . . . . . . . . . . . . . . . . 6
Using the Control Panel� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Using the Power Nutri Bowl � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Using the Power Nutri Cup � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Care & Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Resetting the Motor Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . .12
Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Product Registration � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
TECHNICAL SPECIFICATIONS
Voltage: 120V ~60Hz
Power: 1100 Watts
TIP: You can find the model and serial
numbers on the QR code label on the
back of the unit by the power cord.
RECORD THIS INFORMATION
Model Number: ����������������
Serial Number: �����������������
Date of Purchase: ���������������
(Keep receipt)
Store of Purchase: ��������������
REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device

4ninjakitchen.com 5ninjakitchen.com
WARNING
To reduce the risk of fire, electric shock,
serious injury, death, or damage when
using this appliance, follow these basic
safety precautions.
General Precautions
1Read all instructions prior to using the
appliance and its accessories.
2Carefully observe and follow all
warnings and instructions. This unit
contains electrical connections and
moving parts that potentially present
risk to the user.
3ALWAYS exercise care when handling
the Hybrid Edge™ Blades Assembly.
The blades are sharp, handle carefully.
ONLY grasp the Hybrid Edge Blades
Assembly by the outer perimeter of
the blade assembly base. Failure to use
care when handling the blade assembly
will result in a risk of laceration.
4Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
5Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
6Blades are sharp. Handle carefully.
7Unplug the appliance from the outlet
when not in use, before assembling
or disassembling parts, and before
cleaning. To unplug, grasp the plug
by the body and pull from the outlet.
NEVER unplug by grasping and pulling
the flexible cord.
8Before use, wash all parts that may
contact food. Follow washing instructions
covered in this instructionmanual.
9To protect against the risk of electric
shock, DO NOT submerge the
appliance or allow the power cord to
contact any form of liquid.
10 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
11 This appliance has important markings
on the plug blade. The attachment plug
or entire cordset (if plug is molded onto
cord) is not suitable for replacement. If
damaged, the appliance shall be replaced.
12 This appliance has a polarized plug
(one prong is wider than the other). To
reduce the risk of electric shock, this
plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT modify the plug in any way.
13 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
14 Extension cords should NOT be used
with this appliance.
15 DO NOT allow children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
16 This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
17 Before each use, inspect blade
assembly for damage. If a blade is
bent or damage is suspected, contact
SharkNinja to arrange for replacement.
18 DO NOT attempt to sharpen blades.
19 DO NOT allow the unit or the cord
to hang over the edges of tables
or counters. The cord may become
snagged and pull the appliance o
the work surface.
20 DO NOT allow any part of the unit to
contact hot surfaces, including stoves
and other heating appliances.
21 ALWAYS use the appliance on a dry
and level surface.
22 NEVER place a blade assembly on
the motor base without it first being
attached to the cup.
23 Keep hands, hair, and clothing out of the
container when loading and operating
24 ONLY use attachments and accessories
that are provided with the product or
are recommended by SharkNinja. The
use of attachments not recommended
or sold by SharkNinja may cause fire,
electric shock, or injury.
25 During operation and handling of the
appliance, avoid contact with moving parts.
26 DO NOT operate the appliance with an
empty container.
27 DO NOT fill containers past the MAX
FILL or MAX LIQUID lines.
28 DO NOT microwave any containers or
accessories provided with the appliance.
29 DO NOT perform grinding operations.
30 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
31 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are
properly installed before operation.
32 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
33 NEVER leave the appliance unattended
while in use.
34 DO NOT blend hot liquids. Doing so
may result in pressure buildup and
steam exposure that can pose a risk of
the user being burned.
35 If you find unmixed ingredients
sticking to the sides of the cup, stop
the appliance, remove the blade
assembly, and use a scraper to dislodge
ingredients.
36 DO NOT attempt to remove the
container and lids from the motor
base while the blade assembly is still
spinning. Allow the appliance to come
to a complete stop before removing lid
and container.
37 Remove the Hybrid Edge™ Blades
Assembly from the Power Nutri™ Cup
or Power Nutri Bowl upon completion
of blending. DO NOT store ingredients
before or after blending them in the
cup with the blade assembly attached.
Some foods may contain active
ingredients or release gases that will
expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury. For
ingredient storage in the cup, use only
Spout Lid to cover. For ingredient
storage in the bowl, use only Spout Lid
or Storage Lid.
38 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately 15 minutes before using
again.
39 The maximum wattage rating for this
appliance is based on the configuration
of the Hybrid Edge Blades Assembly and
Power Nutri Cup. Other configurations
may draw less power or current.
40 DO NOT process dry ingredients without
adding liquid to the Power Nutri Cup or
Power Nutri Bowl. They are not intended
for dry blending.
41 To protect against risk of electrical
shock, DO NOT immerse the motor
base in water or other liquid. Unplug
the motor base before cleaning.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
Read and review instructions for operation and use�
Indicates the presence of a hazard that can cause personal injury,
death or substantial property damage if the warning included with this
symbol is ignored�
For indoor and household use only�
When using electrical appliances, basic safety precautions should always be
followed, including the following:

6ninjakitchen.com 7ninjakitchen.com 7
PARTS
ASpout Lid x2
B24 oz. Power Nutri™ Cup x2
CStorage Lid x2
D14 oz. Power Nutri Bowl x2
EHybrid Edge™ Blades Assembly
FMotor Base
(attached power cord not shown)
GETTING TO KNOW YOUR NINJA®
F
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
NOTE: Handle the Hybrid Edge Blades
Assembly by grasping around the
perimeter of the blade assembly base.
1Remove all packaging materials from
the unit. Exercise care when unpacking
blade assembly, as the blades are sharp.
2Wash containers, lids, and blade
assembly in warm, soapy water using
a dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assembly, as the blades are sharp.
3Thoroughly rinse and air-dry all parts.
Powering through tough and frozen
ingredients used to require a lot of
stopping, scraping, and recipe tinkering.
But now, it’s easier than ever to create
thick and spoonable smoothie bowls, nut
butters, and more. All you have to do is
twist the Power Paddle while blending to
push ingredients down toward the blade.
It’s like having a built-in tamper.
NOTE: All attachments are BPA
free and dishwasher safe. It is
recommended that the containers,
lids, and blade assembly be placed on
the top rack of the dishwasher. Ensure
blade assembly and lid are removed
from the container before placing in
the dishwasher. Exercise care when
handling blade assembly.
BEFORE FIRST USE
USING THE CONTROL PANEL
AUTO-IQ PROGRAMS:
EXTRACT
Ideal for tough, leafy, or fibrous whole fruits
and vegetables, including their skins, seeds,
and stems.
SMOOTHIE
Combine your favorite fresh or frozen
ingredients, liquids, and powders to create
smoothies and proteins shakes.
SPREAD
Create anything from spreadable nut butters
to zesty dressing to the perfect hummus.
BOWL
Make thick, spoonable smoothie bowls,
creamy frozen yogurt, and refreshing sorbets.
MANUAL PROGRAMS:
START/STOP
Press once to start continuous running
up to 60 seconds; press again to stop.
Can also be pressed to stop a running
Auto-iQ program.
PULSE
Oers greater control of pulsing and
blending. Operates only when PULSE is
pressed. Use short presses for short
pulses and long presses for long pulses.
AUTO-IQ®PROGRAMS
Intelligent preset programs combine unique blending and pausing patterns that do the
work for you. Once a preset program is selected, it will start immediately and automatically
stop when blending is complete. To stop blending before the end of the program, press the
currently active button again.
E
B
A
C
D
NOTE: Manual programs cannot be
used in conjunction with any Auto-iQ
programs.
NOTE: For the best results when
using the Power Nutri™ Bowl, use the
Spoonable Auto-iQ Programs, BOWL
and SPREAD.
NOTE: The Hybrid Edge Blades
Assembly is not compatible with other
Ninja products.
GETTING TO KNOW THE POWER NUTRI BOWL

9ninjakitchen.comninjakitchen.com
2Add liquid then ingredients to the Power
Nutri Bowl. DO NOT add liquid past the
LIQUID FILL line or ingredients past the
MAX FILL line.
8
USING THE POWER NUTRI™ BOWL
3Place the Hybrid Edge™ Blades Assembly
on the top of the bowl and turn clockwise
to seal.
5a If using an Auto-iQ® program, select
the program that best suits your
desired output. During the blending
process, twist the Power Paddle
counterclockwise continuously. The
preset feature will automatically stop
at the end of the program. To stop the
unit at any time, press the currently
active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again,
and wait for the unit to come to a
complete stop. During the blending
process, make sure to twist the Power
Paddle counterclockwise continuously.
4Turn the bowl upside down and install on
motor base by aligning the tabs on the
bowl with the slots on the base. Then,
rotate bowl clockwise until it clicks. Once
locked in place, the programs will illuminate
and the unit will be ready for use.
7Remove the blade assembly by
twisting counterclockwise. DO NOT
store blended contents with the blade
assembly attached. Only use the Spout
Lid or Storage Lid to cover. Exercise care
when handling the blade assembly, as
the blades are sharp.
8To enjoy on the go, place the Spout Lid
or Storage Lid onto the bowl and twist
lid clockwise until firmly sealed.
6Remove the bowl from the motor base
by turning it counterclockwise and then
lifting up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
1Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
9Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
NOTE: While processing, twist the Power
Paddle counterclockwise continuously.

11ninjakitchen.comninjakitchen.com10
USING THE POWER NUTRI™ CUP
3Place the Hybrid Edge™ Blades Assembly
on the top of the cup and turn clockwise
to seal.
5a If using an Auto-iQ® program, select
the program that best suits your
desired output. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again,
and wait for the unit to come to a
complete stop.
4Turn the cup upside down and install
on the motor base by aligning the tabs
on the cup with the slots on the base.
Then, rotate cup clockwise until it clicks.
Once locked in place, the programs will
illuminate and the unit will be ready for
use.
7Remove the blade assembly by
twisting counterclockwise. DO NOT
store blended contents with the blade
assembly attached. Only use the Spout
Lid or Storage Lid to cover. Exercise care
when handling the blade assembly, as
the blades are sharp.
8To enjoy on the go, place the Spout Lid
or Storage Lid onto the cup and twist lid
clockwise until firmly sealed.
9Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
6Remove the cup from the motor base
by turning it counterclockwise and then
lifting up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
2Add ingredients to the Power Nutri Cup.
DO NOT add ingredients past the
MAX LIQUID line.
1Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.

CLEANING
Hand-Washing
Wash containers, lids, and blade assembly
in warm, soapy water. Use a dishwashing
utensil with handle to avoid direct contact
with the blades. Exercise care when handling
the blade assembly as the blades are sharp.
Thoroughly rinse and air-dry all parts.
STUCK-ON INGREDIENTS IN THE
POWER NUTRI BOWL
For stuck-on ingredients, such as nut
butter, rinse the bowl and blade assembly
under warm water.
Next, fill the bowl with warm water up to
the top of the paddle and add 1–2 small
drops of dish soap.
Screw on the blade assembly and
press BOWL. Twist the Power Paddle
counterclockwise continuously while cleaning.
Then, empty contents and rinse under
warm water and wipe with a dishwashing
utensil, if needed.
Dishwasher
Containers, lids, and blade assembly are
top-rack dishwasher safe ONLY. Ensure
the blade assembly and lid are removed
from the container before placing in
the dishwasher.
Motor Base
Unplug the unit before cleaning. Wipe
motor base with a clean, damp cloth.
12 13ninjakitchen.comninjakitchen.com
CARE & MAINTENANCE
STORING
For cord storage, wrap cord with hook-
and-loop fastener near the back of the
motor base. DO NOT wrap the cord around
the bottom of the base for storage.
DO NOT store blended or unblended
ingredients in the cup or bowl with the blade
assembly attached. Use only the spout
lid or storage lid when storing blended or
unblended ingredients in the containers.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside
the unit or in a cabinet where they will not be
damaged or create a hazard.
RESETTING THE
MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1Unplug the unit from the electrical outlet.
2Allow the unit to cool for approximately
15 minutes.
3Remove the blade assembly from the
container. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, call Customer
Service at 1-877-646-5288. So we may
better assist you, please register your
product online at registeryourninja.com and
have the product on hand when you call.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, unplug unit
before troubleshooting�
Control panel does not illuminate�
• Make sure unit is plugged in. If the unit is powered on and no container is installed, the
unit will display ‘- -’. The available programs will illuminate after placing a container on
base and rotating it clockwise until it clicks into place.
Control panel doesn’t turn o�
• Remove container from base by rotating it counterclockwise and lifting it up. The
display with flash ‘- -’. Unplug the power cord from the outlet. If the unit remains
plugged in, the display will time out after 3 minutes of inactivity. Press any button to
wake the unit.
Doesn’t mix well; ingredients get stuck�
• Using the Auto-iQ® programs is the easiest way to achieve great results. The pulses
and pauses allow the ingredients to settle toward the blade assembly. If ingredients
are routinely getting stuck, adding some liquid will usually help.
• When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs.
Next add liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or
frozen ingredients.
• If using the Power Nutri™ Bowl, during the blending process twist the Power Paddle
counterclockwise continuously to circulate ingredients.
Unit moves on counter while blending�
• Make sure the counter and feet of the unit are clean and dry.
Lid or Hybrid Edge™ Blades Assembly is hard to install on the container�
• Set the container on a level surface. Carefully place the lid or blade assembly on the
top of the container and align the threads so the lid/blade assembly sits flat. Twist
clockwise until you have a tight seal.
Can’t remove the paddle from the Power Nutri Bowl�
• The paddle in the Power Nutri Bowl is not removable. For cleaning instructions, refer
to the Care & Maintenance section.
1-2 SMALL DROPS OF DISH SOAP
FILL WATER TO
TOP OF PADDLE
NOTE: The paddle in the Power Nutri™
Bowl is not removable.

14 ninjakitchen.com 15ninjakitchen.com
REPLACEMENT PARTS
To order additional parts and attachments, visit ninjaaccessories.com.
PRODUCT REGISTRATION
Please visit registeryourninja.com to register your new Ninja® product within ten
(10) days of purchase. You will be asked to provide the store name, date of purchase,
and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety
notification. By registering, you acknowledge you have read and understood the
instructions for use and warnings set forth in the accompanying instructions.
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the
original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship
for a period of one (1) year from the date of purchase when it is used under normal
household conditions and maintained according to the requirements outlined in the
Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months
following the receipt date of the replacement unit or the remainder of the existing
warranty, whichever is later. SharkNinja reserves the right to replace the unit with one
of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, blades,
blender bases, etc.), which require regular maintenance and/or replacement to ensure
the proper functioning of your unit, are not covered by this warranty. Replacement
parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and
other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects
include damages caused in the process of shipping, altering, or repairing the
SharkNinja product (or any of its parts) when the repair is performed by a repair
person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help.
Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product
support and warranty service options, including the possibility of upgrading to our VIP warranty
service options for select product categories. So we may better assist you, please register your
product online at registeryourninja.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships
the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof
of purchase. We also ask that you register your product online at registeryourninja.com and
have the product on hand when you call, so we may better assist you. A Customer Service
Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY

@ninjakitchen
SharkNinja Operating LLC
US: Needham, MA 02494
1-877-646-5288
ninjakitchen�com
Illustrations may dier from actual product. We are constantly striving to improve our products;
therefore the specifications contained herein are subject to change withoutnotice.
AUTO-IQ, DUO, and NINJA
are registered trademarks of SharkNinja Operating LLC.
FOODI, HYBRID EDGE, POWER NUTRI, and SMARTTORQUE are trademarks of SharkNinja Operating LLC.
For SharkNinja U.S. patent information, visit sharkninja.com/uspatents/
© 2020 SharkNinja Operating LLC
PRINTED IN CHINA
SS101QSeries�IB�MP�Mv3