NISBETS ESSENTIALS CT813 User manual

Drinks cooler
Instruction manual
Model:
CT813
CT813_UK_A5_v2_20190712.indb 1 2019/7/12 11:27

2
UK Telephone Helpline: 0845 146 2887
Safety Tips
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT immerse in water, or use steam/jet washers to
clean the unit.
• DO NOT cover the appliance when it is operating.
• Always carry, store and handle the appliance in a vertical
position.
• Never tilt the appliance more than 45° from the vertical.
• This appliance is intended to be used in household and
similar applications.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a
Nisbets Essentials agent or a recommended qualified
technician in order to avoid a hazard.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
CT813_UK_A5_v2_20190712.indb 2 2019/7/12 11:27

3
UK
Telephone Helpline: 0845 146 2887
• Cleaning and user maintenance shall not be made by
children without supervision.
• Nisbets Essentials recommends that this appliance should
be periodically tested (at least annually) by a Competent
Person. Testing should include, but not be limited to: Visual
Inspection, Polarity Test, Earth Continuity, Insulation
Continuity and Functional Testing.
• Children aged from 3 to 8 years are allowed to load and
unload refrigerating appliances.
Warning: Risk of fire / flammable materials
• Do not store explosive substances such as aerosol cans with
a flammable propellant in this appliance.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this
machine will provide the best possible performance from your Nisbets Essentials product.
Pack Contents
The following is included:
• CT813 - Thermoelectric Drinks Cooler - Black • Instruction manual
Nisbets Essentials prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your Nisbets Essentials dealer immediately.
Installation
Note: If the unit has not been stored or moved in an upright position, let it stand upright for
approximately 12 hours before operation. If in doubt allow to stand.
1. Remove the appliance from the packaging and the protective film from all surfaces.
2. Avoid positioning the cooler in direct sunlight or damp areas.
3. Maintain a distance of 10cm between the unit and walls or other objects for ventilation. NEVER LOCATE
NEXT TO OR NEAR A HEAT SOURCE.
4. If necessary, adjust the screw legs of the cooler to make it level.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies at
the rear of the appliance.
CT813_UK_A5_v2_20190712.indb 3 2019/7/12 11:27

4
UK Telephone Helpline: 0845 146 2887
Reversing the Door
Depending on the location of the appliance, it may be necessary to change the direction the door of the
cooler opens by changing the side of the door handle. To reverse the door handle:
1. Pull out the cover and remove the 4 screws (Steps1 and 2).
2. Take off the upper hinge (Step 3).
3. Pull out the cover on the reverse side (Step 4).
4. Remove the whole door (Fig.5). Afterwards, put the cooler upside down.
5. Remove the screws and the lower hinge (Steps6 and 7).
6. Remove the feet on the reverse side (Fig.8).
7. Fix the lower hinge and screws on the reverse side (Fig.9). Then fix the feet.
8. Fit the whole door into the lower hinge; then fit the upper hinge with the 4 screws, and finally fit the cover.
CT813_UK_A5_v2_20190712.indb 4 2019/7/12 11:27

5
UK
Telephone Helpline: 0845 146 2887
Controller
The controller is located inside the cabinet.
The thermostat is graded from MIN (12°C) to MAX (5°C).
To avoid contamination of food, please respect the following instructions:
• Opening the door for long periods can cause a significant increase of the
temperature in the compartments of the appliance.
• If the refrigerating appliance is left empty for long periods, switch it off. Then defrost and clean it
thoroughly. Let it dry well and leave the door open to prevent mould developing within the appliance.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems.
• Store raw meat and fish in suitable containers in the refrigerator, so that they are not in contact with or
drip onto other food.
Note: Please store different food according to the compartments or targeted storage temperature of your
purchased items.
Cleaning, Care & Maintenance
• Always switch off and disconnect the power supply before cleaning.
• Warm, soapy water is recommended for cleaning. Cleaning agents may leave harmful residues.
• A Nisbets Essentials agent or qualified technician should carry out repairs if required.
• Periodically clean the bottom of the cooler compartment to remove any build-up of condensation.
Troubleshooting
If your Nisbets Essentials appliance develops a fault, please check the following table before making a call to
the Helpline or your Nisbets Essentials dealer.
Fault Probable Cause Solution
The appliance is not
working
The unit is not switched on Check the unit is plugged in correctly and switched on
Plug and lead are damaged Call Nisbets Essentials agent or qualified Technician
Fuse in the plug has blown Replace the fuse
Power supply Check power supply
Internal wiring fault Call Nisbets Essentials agent or qualified Technician
Appliance is noisy or
works intermittently
Appliance is not level Adjust the feet to level the appliance
Cooler cabinet is not
cold enough
Temperature set incorrectly Check temperature and reset if necessary
External environment may
require colder temperature
Check temperature and reset if necessary
The door is opened too often Only open when necessary
Door seal is worn Call Nisbets Essentials agent or qualified technician
The light does not
work
Bulb has blown Call Nisbets Essentials agent or qualified technician
Doors will not close
properly
Cooler is not level Adjust the feet
Door has been reversed and
not properly fitted
See “Reversing the Door”
Shelves are out of position Check all shelves are properly inserted
Door seal is dirty Wipe clean with a damp cloth
CT813_UK_A5_v2_20190712.indb 5 2019/7/12 11:27

6
UK Telephone Helpline: 0845 146 2887
Technical Specifications
Model Voltage Power Current Temperature
Range
Dimensions
H x W x D mm Weight Net capacity
CT813 220-240V~ 50Hz 70W 0.55A 5-12°C 510 x 430 x 410 8.5kg 36L
Electrical Wiring
Nisbets Essentials appliances are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as
standard.
The plug is to be connected to a suitable mains socket.
Nisbets Essentials appliances are wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection
being required they must be readily accessible.
Disposal
EU regulations require refrigeration product to be disposed of by specialist companies who remove or recycle
all gasses, metal and plastic components.
Consult your local waste collection authority regarding disposal of your appliance. Local authorities are not
obliged to dispose of commercial refrigeration equipment but may be able to offer advice on how to dispose
of the equipment locally.
Alternatively call the Nisbets Essentials helpline for details of national disposal companies within the EU.
Compliance
The WEEE logo on this product or its documentation indicates that the product must not
be disposed of as household waste. To help prevent possible harm to human health and/
or the environment, the product must be disposed of in an approved and environmentally
safe recycling process. For further information on how to dispose of this product correctly,
contact the product supplier, or the local authority responsible for waste disposal in your
area.
Nisbets Essentials parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and federal
authorities.
Nisbets Essentials products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of Nisbets Essentials.
Every effort is made to ensure all details are correct at the time of going to press, however, Nisbets Essentials reserve the right to change
specifications without notice.
CT813_UK_A5_v2_20190712.indb 6 2019/7/12 11:27

DECLARATION OF CONFORMITY
•Conformiteitsverklaring • Déclaration de conformité • Konformitätserklärung • Dichiarazione di conformità •
•Declaración de conformidad • Declaração de conformidade
Equipment Type • Uitrustingstype • Type d'équipement •
Gerätetyp •
Tipo di apparecchiatura • Tipo de equipo • Tipo de equipamento
Model • Modèle • Modell • Modello • Modelo • Malli
CT813
Application of Council Directives(s)
Toepassing van Europese Richtlijn(en) • Application de la/des
directive(s) du Conseil • Anwendbare EU-Richtlinie(n) •
Applicazione delle Direttive • Aplicación de la(s) directiva(s) del
consejo • Aplicação de directiva(s) do Conselho
Low Voltage Directive (LVD) 2014/35/EU
EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017
EN 60335-2-24:2010
EN 62233:2008 + AC:2008
Electro-Magnetic Compatibility (EMC) Directive
2014/30/EU
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Restriction of Hazardous Substances Directive
(RoHS) 2015/863 amending Annex II to Directive
2011/65/EU
Regulation (EC) 643/2009 - Ecodesign refrigerators
EN 60704-2-14:2013 + A11:2015
Producer Name • Naam fabrikant • Nom du producteur • Name
des Herstellers • Nome del produttore • Nombre del fabricante •
Nome do fabricante
Nisbets Essentials
Producer Address • Adres fabrikant • Adresse du producteur •
Anschrift des Herstellers • Indirizzo del produttore • Dirección
del fabricante • Morada do fabricante
Fourth Way,
Avonmouth,
Bristol,
BS11 8TB
United Kingdom
42 North Point Business
Park
New Mallow Road
Cork
Ireland
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).
Ik, de ondergetekende, verklaar hierbij dat de hierboven gespecificeerde uitrusting goedgekeurd is volgens de bovenstaande
Richtlijn(en) en Standaard(en).
Je soussigné, confirme la conformité de l'équipement cité dans la présente à la / aux Directive(s) et Norme(s) ci-dessus
Ich, der/die Unterzeichnende, erkläre hiermit, dass das oben angegebene Gerät der/den oben angeführten Richtlinie(n) und Norm(en)
entspricht.
Il sottoscritto dichiara che l'apparecchiatura di sopra specificata è conforme alle Direttive e agli Standard sopra riportati.
El abajo firmante declara por la presente que el equipo arriba especificado está en conformidad con la(s) directiva(s) y estándar(es)
arriba mencionadas.
Eu, o abaixo-assinado, declaro que o equipamento anteriormente especificado está em conformidade com a(s) anterior(es) Directiva(s)
e Norma(s)
Date • Data • Date • Datum • Data • Fecha • Data
18th June 2019
Signature • Handtekening • Signature • Unterschrift
Firma • Firma • Assinatura
Full Name • Volledige naam • Nom et prénom • Vollständiger Name •
Nome completo • Nombre completo • Nome por extenso
Ashley Hooper
Position • Functie • Fonction • Position • Qualifica • Posición • Função
Technical & Quality Manager
Thermoelectric Drinks Cooler - Black
CT813_UK_A5_v2_20190712.indb 7 2019/7/12 11:27

CT813_UK_A5_v2_20190712
http://www.nisbets.com/
CT813_UK_A5_v2_20190712.indb 8 2019/7/12 11:27