Niviuk PEAK 6 User manual
USER MANUAL
WELCOME
PEAK 6
RAISE THE BAR
We welcome you to our team and thank you for the
paraglider.
We would like you to share the enthusiasm with which
we have created this paraglider and the importance
and care with which we have developed the design
and manufacture of this new model. All this, in order
your own limits. More performance, with an incredibly
outstanding handling.
will soon discover the meaning of our motto:
“The importance of small details to make
great things happen”.
This is the user manual and we recommend you read
it carefully.
Niviuk Gliders & Air Games SL
C/ Del Ter 6 - nave D
+34 972 422 878
www.niviuk.com
2
USER MANUAL
This manual provides you with the necessary
information on the main characteristics of
your new paraglider.
Whilst it provides information on the wing,
it cannot be viewed as an instructional
required to fly this type of paraglider. Training
paragliding school and each country has its
own system of licensing.
respective countries can determine pilot
competence.
The information in this manual is provided
in order to warn you against adverse flying
situations and potential dangers.
important to carefully read all the contents of
Misuse of this equipment could lead to
and dealers cannot be held responsible for
of the pilot to ensure the equipment is used
correctly.
4
4
4
4
4
6
6
6
6
6
6
7
7
7
7
7
8
8
8
8
8
8
8
8
8
9
9
10
10
10
11
11
11
12
12
12
12
12
12
13
13
13
13
14
15
15
16
16
17
18
19
20
20
21
22
CONTENTS
1. CHARACTERISTICS
2. UNPACKING AND ASSEMBLY
3. THE FIRST FLIGHT
4. IN FLIGHT
5. LOSING ALTITUDE
6. SPECIAL METHODS
7. CARE AND MAINTENANCE
8. SAFETY AND RESPONSIBILITY
9. GARANTEE
10. ANNEXES
3
1. CHARACTERISTICS
1.1 WHO IS IT DESIGNED FOR?
safety in all phases of flight.
1.2 CERTIFICATION
We recommend pilots read the flight test report carefully, especially the comments of the test pilot. The
report contains all the necessary information on how the paraglider reacts during each of the tested
manoeuvres.
turbulence and to pilot errors.
in turbulent conditions and who accept the consequences of flying with this type of wing.
1.3 IN-FLIGHT BEHAVIOUR
handling, to make flying easier for the pilot.
conditions.
overshooting.
range of speed for incredible glides.
1.4 TECHNOLOGIES, CONSTRUCTION, MATERIALS
the current technology and accessories available to improve pilot comfort whilst increasing safety and
performance.
4
that we would like to introduce the technologies included in this new model:
RAM Air Intake – The system is characterised by the arrangement of the air inlets, to ensure optimal
maintenance of internal pressure across the the whole range of angles of attack.
Titanium Technology (TNT
provides the highest level of protection against deformation, heat or breaks.
SLE (Structured Leading Edge)
provides increased strength and stability by maintaining the shape of the aerofoil throughout all phases of
much more durable over time.
3D Pattern Cut Optimisation (3DP) – this involves placing the fabric of each panel in one direction only,
keeps its shape better and is much more durable over time.
3D Leading Edge (3DL)
perfectly uniform, increasing the performance and durability of the glider.
Structured Trailing Edge (STE)
strength are improved, reducing creases and drag while increasing the performance of the sail.
Drag Reduction Structure (DRS)
progressive at the trailing edge. This increases performance without reducing safety and control of the wing.
Radial Sliced Diagonal (RSD)
reduces the overall weight of the glider and avoids deformation.
flight comfort.
meticulous, automated computer laser-cutting robotic arm.
This program also paints the guideline markers and numbers on each individual fabric piece, thus avoiding
errors during this delicate process.
inspection. The canopy is cut and assembled under strict quality control conditions facilitated by the
automation of this process.
and is covered by our warranty.
The line diameter has been calculated depending on the workload and aims to achieve the required best
performance with the least drag.
The lines are semi-automatically cut to length and all the sewing is completed under the supervision of our
specialists.
5
2. UNPACKING AND ASSEMBLY
manufacturer.
manual.
1.5 ELEMENTS, COMPONENTS
paraglider:
facilitates transport of all the equipment comfortably and with plenty of space.
!
2.1 CHOOSING THE RIGHT LOCATION
2.2 PROCEDURE
Take the paraglider out of the rucksack, open and unfold it on the ground with the lines positioned on the
that there are no knots.
2.3 CONNECTING THE HARNESS
This colour-coding makes it easier to connect the wing to the correct side and helps prevent pre-flight errors.
2.4 HARNESS TYPE
6
2.5 SPEED-BAR
pushed using the feet, the wing accelerates. The speed can be regulated by varying the pressure on the bar.
!
2.5.2 CHANGING THE RISER CORDS
which the speed-bar is used causes the cord to wear and you may need to replace them.
restrictions which is very useful for some models of harnesses.
2.6 INSPECTION AND WING INFLATION ON THE GROUND
After your gear has been thoroughly checked and the weather conditions deemed favourable for flying, inflate
2.7 ADJUSTING THE BRAKES
modify the brake length, loosen the knot, slide the line through the brake handle to the desired point and
When changing the brake length, it is necessary to check that they do not engage when the speed-bar is
2.5.1 SPEED SYSTEM ASSEMBLY
The speed-bar consists of the bar that the pilot pushes with their feet, as well as the two cords that connect
personal preferences, etc.
To connect it to the harness, please follow the instructions of the harness manufacturer. The
connection system that is safe may be used.
7
3.1 CHOOSING THE RIGHT LOCATION
supervising the entire procedure.
3.2 PREPARATION
3.3 FLIGHT PLAN
3.4 PRE-FLIGHT CHECK
of your gear with the wing fully open, the lines untangled and properly laid out on the ground to ensure that all
3.5 WING INFLATION, CONTROL AND TAKEOFF
wishes to do so.
3.6 LANDING
3.7 PACKING
and integrity of the internal structures in perfect condition.
that each model requires. This folding system guarantees that both the cloth and the reinforcements of the
internal structure remain in perfect condition.
4. IN FLIGHT
manoeuvres.
vary.
Having the knowledge that the testing house provides through the test report is fundamental to learning how
to deal with possible situations.
3. THE FIRST FLIGHT
8
4.1 FLYING IN TURBULENCE
degree of passive safety, even in turbulent conditions.
All paragliders must be piloted for the prevailing conditions and the pilot is the ultimate safety factor.
We recommend active flying in turbulent conditions, always taking measures to maintain control of the wing,
preventing it from collapsing and restoring the speed required by the wing after each correction.
action, make the input then re-establish the correct flying speed.
4.2 POSSIBLE CONFIGURATIONS
To become familiar with the manoeuvres described below, we recommend practising within the environment
over-steering.
the tested manoeuvres. Having this information is crucial to know how to react during these manoeuvres in
real flight, so you can deal with these situations as safely as possible.
Asymmetric collapse
Frontal collapse
glider air speed.
Negative spin
o
Parachutal stall
appears to be fully inflated. To regain normal air speed, release brake line tension symmetrically and manually
Deep Stall
rearward and then reposition itself overhead, rocking slightly, depending on how the manoeuvre is done.
9
important to maintain brake pressure until the glider has returned to its default overhead flying position.
To resume normal flight conditions, progressively and symmetrically release the brake line tension to regain
air speed. When the wing reaches the overhead position, the brakes must be fully released. The wing will
pull both brake handles down to bring the wing back up and release them immediately while the glider is still
in transition to reposition itself overhead.
Cravat
A cravat may happen after an asymmetric collapse, when the end of the wing is trapped between the lines.
by applying tension on the opposite brake and weight shift opposite to the turn. Then locate the stabilo line
the outside position of the A-riser.
possible landing spot, controlling the direction with both weight-shift and the use of the brake opposite to the
may not be possible to continue on the intended flight path.
Over-controlling
unpredicted incidents. We should note that the wrong inputs can lead to loss of control of the glider. The
speed and attitude after any type of incident.
4.3 ACCELERATED FLIGHT
establish the air speed after correcting the angle of attack.
4.4 FLYING WITHOUT BRAKE LINES
4.5 LINE KNOT(S) IN FLIGHT
10
descent method will depend on the particular situation.
To become familiar with the manoeuvres described below, we recommend practising within the environment
5.1 BIG EARS
pull them outward and downward. The wingtips will fold in. To re-establish forward speed and the correct
angle of attack, accelerate once the ears are pulled.
then the other. Asymmetric reopening is recommended in order to avoid compromising the angle of attack,
particularly flying near the ground or in turbulent conditions.
speed loss that needs to be recovered by using the speed bar or releasing ears.
achieved.
back of the sail, as if you were going backwards.
5. LOSING ALTITUDE
!
pronounced arc.
angle of attack and the added drag of the ears.
These particularities, together with turbulent thermic conditions, could cause an unintentional stall.
5.2 B3 TECHNIQUE
11
6.1 TOWING
6.2 ACROBATIC FLIGHT
6. SPECIAL METHODS
returning to its normal rate of descent.
!
5.3 B-LINE STALL
5.4 SPIRAL DIVE
this manoeuvre at high altitude and with enough ground clearance.
intensity of the turn can be controlled by braking slightly using the outer brake handle.
momentarily applying tension to the outer brake handle opposite to the turn. The pilot must also weight shift
and lean towards the opposite side of the turn at the same time.
noted.
how the manoeuvre was carried out.
5.5 SLOW DESCENT TECHNIQUE
12
7.3 CHECKS AND INSPECTIONS
A thorough pre-flight check must be performed before every flight.
7.1 MAINTENANCE
checks, we recommend actively maintaining your equipment.
A pre-flight check is obligatory before each flight.
should inspect these and act accordingly.
technologies, paragliders are gaining more safety and performance, which requires greater care of the
materials.
!
7. CARE AND MAINTENANCE
it is critical to avoid any kind of impact or dragging the leading edge on the ground. This part is
hitting the leading edge can cause serious damage to the fabric, which is much more complicated
and costly to repair.
empty any sand that is in your wing. The openings at the end of the wingtips make this much easier.
7.2 STORAGE
solvents, fuels, oils.
o
Weight should not be laid on top of the equipment.
the equipment.
13
for each glider, depending on the conditions of each flying area, climatic conditions, temperature, humidity,
type of terrain, wing loading, etc.
we have the necessary information to be able to know the real behaviour of the lines. With this knowledge we
can keep our gliders in the optimum condition for more flights without any loss of performance due to use.
authorised personnel.
7.4 REPAIRS
kit, as long as no stitching is required to mend the fabric.
14
where safety depends on the person who is practicing it.
even death.
Manufacturers and dealers cannot be held responsible for your decisions, actions or
accidents that may result from participating in this sport.
flight instructor.
manufacturing defect.
The warranty does not cover misuse of the equipment.
inspection.
9. GARANTEE
8. SAFETY AND RESPONSIBILITY
15
Zeester
COLORS
10. ANNEXES
10.1 TECHNICAL SPECIFICATIONS
m2
m2
m
m
m
mm
kg
kg
kg
Cells
Aspect ratio
Span
Chord
Lines
Risers
Glider weight
Total weight in flight
Opt. weight in flight
Total
Main
80
20,5
17,55
2,2
140
4,8
70-85
78-82
80
22
18,83
12,32
2,28
205
5
80
23,7
213
175
5,3
104-107
80
21,83
13,27
2,45
224
175
105-125
115-120
21 22 24 26
16
CANOPY FABRIC CODE SUPPLIER
UPPER SURFACE 30 DMF / N20 DMF DOMINICO TEX CO (KOREA)
BOTTOM SURFACE 70000 E3H PORCHER IND (FRANCE)
PROFILES 30 DFM / 2044 32 FM DOMINICO TEX CO (KOREA)
DIAGONALS 30 DFM / 2044 32 FM DOMINICO TEX CO (KOREA)
LOOPS LKI - 12 KOLON IND. (KOREA)
REINFORCEMENT LOOPS DACRON / RIPSTOP D-P (GERMANY)
TRAILING EDGE REINFORCEMENT MYLAR D-P (GERMANY)
RIBS REINFORCEMENT LTN-0.8/0.5 STICK SPORTWARE CO.CHINA
THREAD SERAFIL 60 AMAN (GERMANY)
SUSPENSION LINES FABRIC CODE SUPPLIER
UPPER CASCADES DC - 60 LIROS GMHB (GERMANY)
UPPER CASCADES DC - 40 LIROS GMHB (GERMANY)
UPPER CASCADES DC - 35 LIROS GMHB (GERMANY)
UPPER CASCADES A-8001/U 50 EDELRID (GERMANY)
UPPER CASCADES A-8001/U 70 EDELRID (GERMANY)
MIDDLE CASCADES DC - 35 LIROS GMHB (GERMANY)
MIDDLE CASCADES A-8001/U 50 EDELRID (GERMANY)
MIDDLE CASCADES A-8001/U 70 EDELRID (GERMANY)
MIDDLE CASCADES A-8001/U 90 EDELRID (GERMANY)
MIDDLE CASCADES A-8001/U 130 EDELRID (GERMANY)
MIDDLE CASCADES A-8001/U 190 EDELRID (GERMANY)
MIDDLE CASCADES A-8001/U 230 EDELRID (GERMANY)
MAIN A-8001/U 70 EDELRID (GERMANY)
MAIN A-8001/U 130 EDELRID (GERMANY)
MAIN A-8001/U 190 EDELRID (GERMANY)
MAIN A-8001/U 340 EDELRID (GERMANY)
MAIN A-8001/U 470 EDELRID (GERMANY)
MAIN BREAK TAR AX-200 EDELRID (GERMANY)
THREAD SERAFIL 60 AMAN (GERMANY)
RISERS FABRIC CODE SUPPLIER
MATERIAL 3455 COUSIN (FRANCE)
COLOR INDICATOR 210D TECNI SANGLES (FRANCE)
THREAD V138 COATS (ENGLAND)
MAILLONS 3.5 ANSUNG PRECISION (KOREA)
PULLEYS RF25109 RONSTAN (AUSTRALIA)
10.2 MATERIALS TECHNICAL DATA
17
a1
b1
c1
d1
A1
A2
a2
b2
2a1
2a2
a3
b3
a4
b4
A3
A4
3a1
a5
b5
a6
b6
A5
A6
2a3
2a4
A7
A8
a8
b8
a7
b7
3a2
a9
a10
a11
a12
a13
a14
a15
A9
A10
stab
3a3
2a5
c14
c15
c13 c12 c11
c10 c9
d10 d9
C9
C10
3c3
c5
c6
c7
c8
d5
d6
d7
d8
C5
C6
C7
C8
2c3
2c4
3c2
c2
c3
c4
d2
d3
d4
C1
C2
C3
C4
2c1
2c2
3c1
br1
br2
br3
br4
br5
br6
br7
br8
br9
br10
br11
br12
br13
2BR1
2BR2
2BR3
2BR4
2BR6
2BR5
3BR1
3BR3
3BR2
brmain
br5.1
10.3 LINE PLAN
3c1 – 3c2 – 3c3
The 3c1 - 3c2 - 3c3 lines are
connected to the maillon by means of
due to use, stretching or shrinking.
the trim of the wing and the safety of
the pilot.
18
10.4 RISER PLAN
19
Peak 6 - 21 Peak 6 - 22
AB C DBR
17328 7299 7322 7419 7602
27241 7211 7200 7298 7330
37224 7194 7182 7278 7227
47264 7236 7261 7346 7293
57175 7149 7154 7235 7110
67061 7036 7019 7092 6922
76992 6968 6961 7028 6855
86976 6958 6993 7050 6923
96790 6783 6843 6779
10 6694 6686 674 5 6667
11 6630 6636 6600
12 6574 6604 6597
13 6594 6667 6672
14 6482 6504
15 6459 6495
AA’ B
500 500 500
AB C DBR
17585 7556 7592 7695 7886
27496 746 5 74 66 7570 7604
37478 74 4 8 74 51 7551 7498
47519 7492 7532 7622 7567
5743 0 7404 7418 7504 7377
67313 7287 7278 7355 7182
77240 7216 7219 7290 7113
87224 7207 7252 7313 7185
97042 7039 7100 7037
10 6943 6939 7000 6922
11 6878 6888 6853
12 6818 6856 6850
13 6839 6921 6928
14 6719 674 4
15 6696 6735
AA’ B
10.5 LINE MEASUREMENTS 10.6 LINE MEASUREMENTS
20
Other manuals for PEAK 6
1
Table of contents
Other Niviuk Aircraft manuals
Niviuk
Niviuk ARTIK 2 User manual
Niviuk
Niviuk Kougar-2 User manual
Niviuk
Niviuk IKUMA 2 User manual
Niviuk
Niviuk BI ROLLER 2 User manual
Niviuk
Niviuk Arktik User manual
Niviuk
Niviuk PEAK 25 User manual
Niviuk
Niviuk MAKAN User manual
Niviuk
Niviuk Takoo 4 User manual
Niviuk
Niviuk TAKOO 2 User manual
Niviuk
Niviuk KODE P User manual
Niviuk
Niviuk KLIMBER P User manual
Niviuk
Niviuk ROLLER User manual
Niviuk
Niviuk R-BUS 2 User manual
Niviuk
Niviuk ICEPEAK 3 22 User manual
Niviuk
Niviuk ARTIK 5 User manual
Niviuk
Niviuk KLIMBER 2 P User manual
Niviuk
Niviuk ICEPEAK X-ONE User manual
Niviuk
Niviuk KOYOT 3 User manual
Niviuk
Niviuk HOOK 2 User manual
Niviuk
Niviuk LINK 23 User manual
Popular Aircraft manuals by other brands
Peter Lynn
Peter Lynn Lynx user manual
Cessna
Cessna 172SPHUSR05 Pilot operating handbook
Sky Country
Sky Country Scorpion-3 26 user manual
Nervures
Nervures VALLUNA II 25 Technical features and performance
AEROPRAKT
AEROPRAKT 22LS Pilot operating handbook
Flow Paragliders
Flow Paragliders freedom2 XS user manual