Nixie Clock 6xIN-12 User manual

6xIN-12 Nixie clock manual
Clock setting:
•TIME
Short press – changes between setting hours, minutes and seconds
When 12h time format is set, leftmost tube’s dot indicates PM time;
•ALARM
Short press – During normal clock operation changes between setting
alarm hours and minutes When 12h time format is set, leftmost tube’s dot
indicates PM time Two rightmost tubes indicate alarm on/off (“01” - alarm
is on, “00” – alarm is off) During menu setting mode changes selected
feature;
Long press – During normal clock operation switches menu mode on/off;
•SET
Short press – during time and alarm setting increases selected tubes
by one In menu setting mode adjusts or switches selected feature on/off
During normal clock operation changes tubes and backlight brightness
Long press – during time, alarm and menu setting automatically increases
selected tubes During normal clock operation switches backlight on/off;
•Menu mode – to enter or leave menu and store settings press ALARM button
for 2s (number of selected option is indicated by two leftmost tubes, option’s
parameter is indicated by two middle and/or two rightmost tubes):
01 time format and dot mode – middle tubes indicate selected 12/24h time
format Two rightmost tubes indicate selected mode of leftmost tube’s dot
Selecting dot mode is possible only when 12h time format is set
(in 24h time format dot always indicates alarm switched on) Dot mode
“00” – dot indicates alarm switched on, dot mode “01” – dot indicates
PM time When setting time, alarm or menu in 12h time format dot always
indicates PM time;
02 neon blinking at 1Hz on/off – “00” - off, “01” - on;
03 leading zero blanking on/off – “00” - off, “01” - on;
04 time correction – ±9,9s/day time correction with 0,1s resolution Middle
tubes display negative corection value from 0 to -9,9s/day for canceling
time measurement positive error Two rightmost tubes display positive
correction value from 0 to +9,9s/day for canceling time measurement
negative error;

05 tubes cycling and it’s frequency – middle tubes indicate time between
displayed routines (“00”- cycling off, “01”- every 1min, “02”- every 10min,
“03”- every 1hour, “04” every 24hours) Two rightmost tubes indicate
selected routine (“01”- scrolling, “02”- scrolling with shifting, “03”- slot
machine) To choose displayed routine tubes cycling has to be previously
switched on;
06 timed dimming on/off – middle tubes indicate timed dimming on/off (“00”
- off, “01” - on) Two rightmost tubes display tubes brightness level during
timed dimming mode (from “00” - tubes blanked to “04” - full brightness)
When tubes are blanked, pressing any switch will turn them on for 15s with
first brightness level During timed dimming mode brightness adjustment
is disabled;
07 timed dimming on time – middle tubes indicate hours and two rightmost
tubes show minutes of timed dimming on time When 12h time format
is set, leftmost tube’s dot indicates PM time To set timed dimming on time
timed dimming mode has to be previously switched on;
08 timed dimming off time – middle tubes indicate hours and two rightmost
tubes show minutes of timed dimming off time When 12h time format
is set, leftmost tube’s dot indicates PM time To set timed dimming off time
timed dimming mode has to be previously switched on
Clock maintenance: To avoid scratches always use delicate cloth or dust whisk when
cleaning clock’s acrylic enclosure For wet cleaning use cloth slightly moist with water
and some detergent Do not use any solvent or alcohol as it may damage acrylic
surface!
Power supply: 9V DC power adapter with barrel plug connector (5,5mm/2,1mm) and
minimum current output 300mA
Power consumption: average 3W