Nixie Clock IV-22 User manual

IV-22 VFD Desktop Clock
Product manual
Version 1.0
2021
http://nixieshop.com/

Thank you for purchasing a nixieshop.com clock!
Please read the following manual carefully to ensure you get the most out of your Nixie
Clock.
Unboxing
All nixieshop.com clocks are shipped as carefully as possible to ensure safe delivery to you.
In the unlikely event that the clock does arrive damaged, or if you have any questions at all
about using the product, please contact me on [e-mail].
Carefully remove the clock from the box when unboxing this product. The clock is protected
with bubble wrap, but the nixie tubes are installed into sockets, and should be handled with
care.
WARNING: Please note that this clock is for indoor use only.
Contents
Each package contains the following items:
1. Clock base with mounted tubes (tube types are specific to purchased model).
2. 5v 2A power adapter with micro USB jack.
3. Built-in motion sensor (based on Doppler radar).
4. Product manual.
Warranty
Nixieshop.com values your business and always attempts to provide you the very best
quality of service. We provide lifetime warranty for electronics and two year warranty for
tubes. The warranty applies only to the products manufactured by Nixie Shop.
The warranty covers burned out tubes (up to three), problems with the electronics of the
clock. The warranty does not cover: damage of a product resulting from negligence;
damage of a product resulting from unauthorized modification of the product; damage
caused by natural disaster; theft or loss of the product.

Menu
The menu items below are listed in the order that they will appear when going through
them.
LED RGB Values
The clock has one RGB LED under each nixie tube. All colors are adjustable and can be set to
a custom brightness.
1. Red color brightness (0 - 10 levels).
2. Green color brightness (0 - 10 levels).
3. Blue color brightness (0 - 10 levels).
Alarm Settings
4. Alarm mode: 1 - enable; 0 - disable.
5. Alarm start hour.
6. Alarm start minute.
General Settings
7. Seconds dot modes. 0 — blinks once a second (default), 1 — permanently ON, 2 —
permanently OFF.
8. Beep once per hour, on the hour. (0 — disable (default); 1 — enable).
9. Slot machine frequency (1 – 5. Value is the interval in minutes. 0 - disable).
10. Animate RGB LED lights (0 — disable; 1 — enable).
Time/Date Settings
11. 12/24 hour mode. (0 — 24h mode (default); 1 — 12h mode).
12. Set hours.
13. Set minutes.
14. Set month.
15. Set day.
16. Set year.
Sleep Settings
17. Set sleep starting hour - the clock displays ZZ:XX:YY (where XX is the value of the
sleep start hour).
18. Set sleep ending hour - the clock displays ZZ:XX:YY (where YY is the value of the
sleep end hour).
19. Timeout for motion sensor (options from 1-5) - sets delay time from ~1 minute and
longer.
20. Activates built in motion sensor. (0 — disable (default); 1 — enable).

Setting the clock to sleep when not required can help to prolong the life of the Nixie tubes.
The sleep feature works using 24 hour time values. For best results the clock should also be
set into 24H mode (menu option 12).
If you don't mind, please take your time and leave a positive feedback for our eBay or Etsy
store or visit our Facebook group here https://www.facebook.com/NixieShop. Your
feedback is always appreciated and welcome.