Njoy UPAC-TEMPHUM-AZ01B User manual

Sensor Box (Temperature & Humidity)
User manual
UPAC-TEMPHUM-AZ01B
Before using this product, carefully read all product documentaon and retain it for future reference.
111.0

2 3
Thank you for purchasing our products!
Please read this manual before using the product.
Focusing on quality at compeve prices, nJoy designs
consumer products for a beer and enjoyable way into
the digital world.
This UPS will protect your electronic equipment from physical
damage and will provide emergency baery backup power to
prevent data loss in the event of power problems.
Table of contents
EN
1. Package contents ................................................................................................... 3
2. Product overview ................................................................................................... 4
3. Product introducon ............................................................................................ 4
4. Funcon diagram ................................................................................................. 5
5. Installaon .............................................................................................................. 5
5-1. Inspecon .................................................................................................... 5
5-2. Pre-installaon ........................................................................................... 6
5-3. Wall-mounng ............................................................................................ 6
5-4. Connect to power .................................................................................... 6
5-5. SNMP connecon .................................................................................... 6
5-6. Operaon ..................................................................................................... 7
6. Monitoring soware operaon ....................................................................... 7
6-1. Soware installaon .............................................................................. 7
6-2. Operaon ................................................................................................... 7
7. Troubleshoong ...................................................................................................... 9
8. Specicaon of environmental monitoring device .................................. 10
9. Input dry contact terminal ................................................................................. 10
Package contents1
Sensor box
Connection cable (3m)
User Manual
NOTE!
If any of the above package content is missing or is damaged please contact the
shop where you have bought the product from.
nJoy UPS models that are compable with this product:
Aten Pro Series
Balder Series
Garun Series
1K / 2K / 3K
1K / 1.5K / 2K / 3K / 6K / 10K
10KL / 15KL / 20KL / 30KL / 40KL / 60KL / 80KL

4 5
Product overview2
1. Communicaon port
2. Input dry contact terminal
3. Device status indicator
4. DC input connector
Product introduction3
This environmental monitoring device (EMD) is a connecvity device to
remote monitor temperature and humidity via SNMP manager. It also
provides two dry contacts to receive signals from up to 2 compable devices
such as security system and alarm system.
• Plug & use for simple installaon with SNMP manager
• Monitor temperature and humidity to protect your precious equipment
• Allow two contact closure signals for user-dened usage
• Management soware to remote monitor temperature and humidity
status via web browser
• Measure temperatures between 0 to 100°C with an accuracy of ±1.5°C
• Measure relave humidity between 10 to 90% RH with an accuracy of ±3%
Function diagram4
Installation5
5-1. Inspecon
Before installaon, please inspect the unit. Be sure that nothing inside the
package is damaged. You will nd following items inside of package.
Cable spec: UL2835 24AWG*4PAIRS+AEB
Plug Type: 4PCC 3U*2PCS
Environmental monitoring device 3m-length of phone cable
AC
Adapter
Humidity
Detection
SNMP
Manager
Dry
Contact
+12VDC
Imput
signal
RS-232
Temperature
Detection
Optional MCU

6 7
5-2. Pre-installaon
Before making connecon to environmental monitor device, make sure the
UPS is already installed with SNMP manager. Please check SNMP manager
for SNMP card installaon.
5-3. Wall-mounng
There is a mounng hole on the back of the unit. Simply mount the unit by
posion the key-hole slot over the mounng screw. (See chart 1)
Chart 1
5-4. Connect to power
Please follow Chart 2 to connect an external 12VDC power source. If
connecng to SNMP card, there is power from SNMP card. It’s no need to
connect an external power source.
NOTE!
To guarantee safety operation, please use the appropriate DC wire with UL2468
#24AWG spec.
Chart 2
5-5. SNMP Connecon
Connect supplied cable from communicaon port of environmental monitor
device to RS-232 port of SNMP manager. Use another network cable to
connect from RJ45 port of SNMP manager to LAN. (Refer to chart 3).
Chart 3
NOTE!
If supplied cable is not long enough for your application, you may substitute another
longer cable (not exceed 15m).
5.6 Operaon
Aer making connecon, status LED will light up and the unit starts to operate.
Monitoring software operation6
6-1. Soware installaon
Aer unit is connected well, please follow below steps to install monitoring
soware from the internet.
1. Go to the website hp://www.power-soware-download.com
2. Click ViewPower Pro soware icon and then choose your required OS to
download the soware.
3. Follow the on-screen instrucons to install the soware.
4. When your computer restarts, the monitoring soware will appear as an
orange plug icon located in the system tray, near the clock.
6-2. Operaon
Step 1: Doubleclick“ViewPowerPro”iconto
launchthesoware.

8 9
Step 2: SNMPmanagerwillbeautomacally
acvated.Select“SNMPmanager”by
clickingrightbuonofthemouse.
Step 3: EnterspecicIPaddresstosearchallSNMPdevicesinLAN.
TheSNMPmanagerwillautomacallycollecttheIPaddress
fromseverbydefaultviaaDHCPserver.
Step 4: AerSNMPmanagerissuccessfully
detectedbySNMPmanager,select
“OpenMonitor”byclickingrightbut-
tonofthemouse.
Step 5: WhenlaunchingViewPowerProsoware,click“Environmental
informaon”icontoviewstatus.

Troubleshooting7
Problem Possible Cause Soluons
It displays 0 in the
environmental in-
formaon secon
of soware.
SNMP card is not con-
nected well.
Make sure SNMP card is
rmly connected in the
UPS.
Network cable or DC
input connecon is not
connected well.
Make sure network cable
is connected well and DC
input connecon is well.
LED is not lighng
or LED is ashing.
Input power is not stable. Check if DC input is
connected rmly. If the
problem persists, please
contact local dealer.
Temperature or
humidity accuracy
is out of range.
Temperature or humidity
sensor is broken.
Please contact local deal-
er directly.

10
Specification of environmental monitoring device8
Model EMD
NominalDCinput 12VDC
DCinputcurrent 0.5Amin.
Temperaturemeasurementrange 0~100°C
Temperaturemeasurementaccuracy ±1.5°C
Humiditymeasurementrange 10%~90%RH
Humiditymeasurementaccuracy ±3%
Communicaon RS232withASCIIprotocol
Acceptablecablelength 15m
Dimension(DxWxH)mm 80×78×28.5
Netweight 68g
Input dry contact terminal9
Input signal specicaon
Inputvoltage Maximum Minimum
12V 5V
'(7(&725,1387



,1387

,1387
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collecon systems)
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste.
Instead it shall be handed over to the applicable collecon point for the recycling
of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potenal
negave consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources.