Noble House Home Furnishings 63727.00 User manual

Assembly Instructions
Caution: You must read this before you proceed
Swing
Noble House Home Furnishings LLC 1
CAUTION: This Swing is NOT a TOY.
Keep your child/children at bay during the assembly process.
Whenever lifting or moving the Swing and to prevent damage to the Swing, two adults
may be needed to execute these actions.
Noble House Home Furnishings LLC 1

Label Picture Description QTY
A Backrest Panel 1
BSeat Panel 1
C
Left Arm Panel
1
Part List
Noble House Home Furnishings LLC 2
C
Left Arm Panel
1
D Right Arm Panel 1
Label Picture Description QTY
①
Screw (M6x90mm) 4
②
Bolt (M6x35mm) 3
③
Sleeve Nut (M6x35mm) 3
④
Lock Nut (M9)
5
Hardware
④
Lock Nut (M9)
5
⑤Eye Bolt (Ø9x60mm) 4
⑥
Chain (Ø5x2440mm) 4
⑦
Carabiner (M8) 6
⑧
Washer (Ø10/20x2mm) 5
⑨
Wrench (Ø17x2mm) 1
⑩
Allen Key 2
Noble House Home Furnishings LLC 2

Before Beginning Assembly:
Assembly Preparation
Noble House Home Furnishings LLC 3
Overview
Assembly Steps
This Swing has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Swing, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Noble House Home Furnishings LLC 3

Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
B
Noble House Home Furnishings LLC 4
With assistance from your adult partner, attach Backrest Panel(A) to Seat Panel(B) by using
Screws(
①
) with Allen Key(
⑩
) as shown above.
Do not fully tighten the Screws.
Step 3
A
B
Insert the tenons of the Seat Panel(B) into the mortises of Left Arm Panel(C) and Right Arm
Panel(D), then attach using Lock Nuts(
④
), Washers(
⑧
), and Eye Bolts(
⑤
), with Wrench(
⑨
) as
shown above.
Do not fully tighten the Bolts.
Noble House Home Furnishings LLC 4

Step 4
Attach Backrest Panel(A) to Left Arm Panel(C) and Right Arm Panel(D) using Bolts(
②
) and Sleeve
③
⑩
Noble House Home Furnishings LLC 5
Step 5
Attach Backrest Panel(A) to Left Arm Panel(C) and Right Arm Panel(D) using Bolts(
②
) and Sleeve
Nuts(
③
) with Allen Keys(
⑩
) as shown above.
Do not fully tighten the Bolts.
Step 5.1
Step 5.2
5.1) Unscrew the connection on Carabiner(
⑦
), then loop the Chain(
⑥
) onto the Carabiner(
⑦
),
and screw the connection shut.
Note: The distance from Carabiner( ⑦) to the back of Left Arm Panel(C) and Right Arm
Panel(D) is shorter than the distance from Carabiner( ⑦) to the front of Left Arm Panel(C)
and Right Arm Panel(D).
5.2) Align the Chain(⑥
) through the holes of Left Arm Panel(C) and Right Arm Panel(D). Then lock
the end of the Chain to the Eye Bolt(
⑤
) on Left Arm Panel(C) and Right Arm Panel(D) using
Carabiners(
⑦
).
Noble House Home Furnishings LLC 5

Step 6
Noble House Home Furnishings LLC 6
Carefully sit onto the Swing.
This pressure will help the swing reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts and Nuts until evenly secured.
Your Swing is ready for use.
This Swing can only be used on a flat, level surface.
Noble House Home Furnishings LLC 6