Nokia 7302 Installation guide

Nokia — Proprietary and confidential
Use pursuant to applicable agreements
7302 Intelligent Services Access Manager
7330 Intelligent Services Access Manager FTTN
7360 Intelligent Services Access Manager FX
Released 5.6
"FD 100/320Gbps NT and FX NT
IHub System Basics, Management
and OAM Guide"
3HH-11982-AAAA-TQZZA
Issue: 10
March 2017
"FD 100/320Gbps NT and FX NT IHub System Basics, Management and OAM
Guide"

2
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
Nokia is a registered trademark of Nokia Corporation. Other products and company
names mentioned herein may be trademarks or tradenames of their respective
owners.
The information presented is subject to change without notice. No responsibility is
assumed for inaccuracies contained herein.
© 2014-2017 Nokia.
Contains proprietary/trade secret information which is the property of Nokia and must
not be made available to, or copied or used by anyone outside Nokia without its
written authorization. Not to be used or disclosed except in accordance with
applicable agreements.

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 3
Table of contents
1 Preface...........................................................................................19
1.1 Scope ........................................................................................................19
1.2 Audience....................................................................................................19
1.3 Required knowledge..................................................................................19
1.4 Product naming .........................................................................................19
1.5 Documents ................................................................................................19
1.6 Acronyms and initialisms ...........................................................................19
1.7 Safety information......................................................................................20
1.8 Special information ....................................................................................20
1.9 Release notes............................................................................................20
2 Introduction...................................................................................21
2.1 Contents ....................................................................................................21
2.2 CLI Command Syntax Symbols.................................................................21
3 System Management ....................................................................23
3.1 In this Chapter ...........................................................................................23
3.2 Saving Configurations ...............................................................................23
3.3 Configuring System Management with CLI ...............................................26
3.3.1 Saving Configurations ...............................................................................26
3.3.2 Save Command.........................................................................................27
3.4 System Management CLI Command Reference.......................................27
3.4.1 System Information Commands ................................................................28
3.4.2 System Administration Commands ...........................................................28
3.4.3 Show Commands ......................................................................................28
3.4.4 Clear Commands.......................................................................................28
3.5 System Management CLI Commands.......................................................29
3.5.1 System Information Commands ................................................................29
3.5.1.1 lacp-priority ................................................................................................29
3.5.1.2 time............................................................................................................29
3.5.1.3 ntp..............................................................................................................30
3.5.1.4 polling-rate.................................................................................................30
3.5.1.5 server.........................................................................................................30
3.5.1.6 shutdown ...................................................................................................31
3.5.1.7 user-user-hairpin .......................................................................................31
3.5.1.8 vlan-dot1q-etype........................................................................................31
3.5.2 System Administration Commands ...........................................................32
3.5.2.1 display-config.............................................................................................32
3.5.2.2 enable-tech................................................................................................32
3.5.2.3 save ...........................................................................................................33
3.5.2.4 software-mngt ihub database oam-save-protected ...................................33
3.5.3 Show Commands ......................................................................................33
3.5.3.1 core1-cpu...................................................................................................33
3.5.3.2 core1-memory-pools..................................................................................34
3.5.3.3 ntp..............................................................................................................35
3.5.3.4 servers.......................................................................................................35

4
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
3.5.3.5 server.........................................................................................................35
3.5.3.6 user-user-hairpin .......................................................................................36
3.5.3.7 vlan-dot1q-etype........................................................................................36
3.5.3.8 core1-uptime..............................................................................................36
3.5.3.9 ipv6-prefix-mgmt........................................................................................37
3.5.3.10 dst-ip..........................................................................................................37
3.5.3.11 src-ip..........................................................................................................37
3.5.4 Clear Commands.......................................................................................38
3.5.4.1 alarm..........................................................................................................38
4 Security..........................................................................................41
4.1 Security Features ......................................................................................41
4.1.1 Encryption..................................................................................................41
4.1.2 TCP Enhanced Authentication Option.......................................................41
4.1.2.1 Packet Format ...........................................................................................42
4.1.2.2 Keychain....................................................................................................43
4.2 Configuring Security with CLI ....................................................................44
4.2.1 Security Configuration Procedures............................................................44
4.2.1.1 Configuring IP CPU Filters ........................................................................44
4.2.1.2 Configuring IPv6 CPU Filters.....................................................................45
4.2.1.3 Configuring Keychains...............................................................................46
4.3 Security CLI Command Reference............................................................47
4.3.1 Source address type Command ................................................................47
4.3.2 CPU filter Commands................................................................................47
4.3.3 Keychain Commands ................................................................................48
4.3.4 Show Commands ......................................................................................49
4.4 Security CLI Commands............................................................................49
4.4.1 General Security Commands ....................................................................49
4.4.1.1 description .................................................................................................49
4.4.1.2 shutdown ...................................................................................................50
4.4.1.3 address-type..............................................................................................50
4.4.2 CPU-filter Commands................................................................................51
4.4.2.1 cpu-filter.....................................................................................................51
4.4.2.2 default-action .............................................................................................51
4.4.2.3 ip-filter........................................................................................................52
4.4.2.4 entry...........................................................................................................52
4.4.2.5 action .........................................................................................................53
4.4.2.6 match.........................................................................................................54
4.4.2.7 dscp ...........................................................................................................55
4.4.2.8 dst-ip..........................................................................................................56
4.4.2.9 dst-port ......................................................................................................56
4.4.2.10 fragment ....................................................................................................57
4.4.2.11 icmp-code ..................................................................................................57
4.4.2.12 icmp-type ...................................................................................................58
4.4.2.13 option-present............................................................................................58
4.4.2.14 service .......................................................................................................59
4.4.2.15 src-ip..........................................................................................................59
4.4.2.16 src-port ......................................................................................................59
4.4.2.17 tcp-ack.......................................................................................................60
4.4.2.18 tcp-syn .......................................................................................................60

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 5
4.4.2.19 shutdown ...................................................................................................61
4.4.2.20 ipv6-filter ....................................................................................................61
4.4.2.21 entry...........................................................................................................62
4.4.2.22 action .........................................................................................................62
4.4.2.23 match.........................................................................................................62
4.4.2.24 dscp ...........................................................................................................63
4.4.2.25 dst-ip..........................................................................................................64
4.4.2.26 dst-port ......................................................................................................64
4.4.2.27 icmp-code ..................................................................................................65
4.4.2.28 icmp-type ...................................................................................................65
4.4.2.29 router .........................................................................................................65
4.4.2.30 service .......................................................................................................66
4.4.2.31 src-ip..........................................................................................................66
4.4.2.32 src-port ......................................................................................................67
4.4.2.33 tcp-ack.......................................................................................................67
4.4.2.34 tcp-syn .......................................................................................................67
4.4.2.35 shutdown ...................................................................................................68
4.4.2.36 renum ........................................................................................................68
4.4.3 Keychain Commands ................................................................................69
4.4.3.1 keychain ....................................................................................................69
4.4.3.2 direction .....................................................................................................69
4.4.3.3 bi................................................................................................................70
4.4.3.4 uni..............................................................................................................70
4.4.3.5 receive .......................................................................................................70
4.4.3.6 send...........................................................................................................71
4.4.3.7 entry...........................................................................................................71
4.4.3.8 begin-time..................................................................................................72
4.4.3.9 end-time.....................................................................................................73
4.4.3.10 tolerance....................................................................................................73
4.4.3.11 tcp-option-number .....................................................................................74
4.4.3.12 receive .......................................................................................................74
4.4.3.13 send...........................................................................................................75
4.4.4 Show Commands ......................................................................................75
4.4.4.1 cpu-filter ip-filter .........................................................................................75
4.4.4.2 cpu-filter ipv6-filter .....................................................................................76
4.4.4.3 keychain ....................................................................................................76
5 Monitor Commands ......................................................................77
5.1 Monitor Commands ...................................................................................77
5.2 Monitor CLI Command Reference.............................................................77
5.2.1 Monitor CLI Command ..............................................................................78
5.3 Monitor CLI Commands.............................................................................78
5.3.1 Filter Commands .......................................................................................78
5.3.1.1 filter............................................................................................................78
5.3.1.2 ip................................................................................................................79
5.3.1.3 ipv6 ............................................................................................................80
5.3.1.4 mac............................................................................................................81
5.3.2 LAG Commands ........................................................................................83
5.3.2.1 lag..............................................................................................................83
5.3.3 Port Commands.........................................................................................84

6
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
5.3.3.1 port ............................................................................................................84
5.3.4 Router Commands ....................................................................................86
5.3.4.1 router .........................................................................................................86
5.3.4.2 neighbor.....................................................................................................87
5.3.4.3 statistics.....................................................................................................88
5.3.4.4 session ......................................................................................................91
5.3.4.5 statistics.....................................................................................................94
5.3.4.6 interface.....................................................................................................96
5.3.4.7 neighbor...................................................................................................100
5.3.4.8 neighbor...................................................................................................102
5.3.5 Service Commands .................................................................................102
5.3.5.1 service .....................................................................................................102
5.3.5.2 id..............................................................................................................103
5.3.5.3 sdp...........................................................................................................103
6 Events and Logs .........................................................................105
6.1 In this Chapter .........................................................................................105
6.2 Logging Overview....................................................................................105
6.3 Log Destinations......................................................................................106
6.3.1 Session....................................................................................................107
6.4 Event Logs...............................................................................................107
6.4.1 Event Sources .........................................................................................108
6.4.2 Event Control...........................................................................................108
6.4.3 Log Manager and Event Logs .................................................................109
6.4.4 Event Filter Policies .................................................................................109
6.4.5 Event Log Entries ....................................................................................110
6.4.6 Default System Log .................................................................................111
6.5 Configuration Notes.................................................................................112
6.6 Configuring Logging with CLI ..................................................................112
6.6.1 Log Configuration Overview ....................................................................112
6.6.1.1 Log Types................................................................................................113
6.6.2 Basic Event Log Configuration ................................................................113
6.6.3 Common Configuration Tasks .................................................................113
6.6.3.1 Configuring an Event Log ........................................................................114
6.6.3.2 Configuring Event Control .......................................................................114
6.6.3.3 Configuring a Log Filter ...........................................................................114
6.6.4 Log Management Tasks ..........................................................................115
6.6.4.1 Modifying an Event Log ...........................................................................115
6.6.4.2 Deleting a Log File...................................................................................116
6.6.4.3 Modifying a Log Filter ..............................................................................117
6.6.4.4 Deleting a Log Filter ................................................................................118
6.6.4.5 Modifying Event Control Parameters.......................................................119
6.6.4.6 Returning to the Default Event Control Configuration .............................119
6.7 Log CLI Command Reference.................................................................120
6.7.1 Command Hierarchies.............................................................................120
6.7.2 Log Configuration Commands.................................................................120
6.7.3 Show Commands ....................................................................................121
6.8 Log CLI Commands.................................................................................121
6.8.1 Generic Commands.................................................................................122
6.8.1.1 description ...............................................................................................122

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 7
6.8.1.2 shutdown .................................................................................................122
6.8.2 Event Control...........................................................................................123
6.8.2.1 event-control............................................................................................123
6.8.3 Log Filter Commands ..............................................................................124
6.8.3.1 filter..........................................................................................................124
6.8.3.2 default-action ...........................................................................................125
6.8.4 Log Filter Entry Commands.....................................................................125
6.8.4.1 action .......................................................................................................125
6.8.4.2 entry.........................................................................................................126
6.8.5 Log Filter Entry Match Commands ..........................................................127
6.8.5.1 match.......................................................................................................127
6.8.5.2 application ...............................................................................................127
6.8.5.3 number ....................................................................................................128
6.8.5.4 router .......................................................................................................129
6.8.5.5 severity ....................................................................................................129
6.8.5.6 subject .....................................................................................................130
6.8.6 Logging Destination Commands .............................................................130
6.8.6.1 from .........................................................................................................130
6.8.6.2 log-id........................................................................................................131
6.8.6.3 to..............................................................................................................132
6.8.7 Show Commands ....................................................................................132
6.8.7.1 event-control............................................................................................132
6.8.7.2 filter-id......................................................................................................133
6.8.7.3 log-id........................................................................................................134
6.8.8 Clear Commands.....................................................................................135
7 Tools ............................................................................................137
7.1 Tools CLI Command Reference ..............................................................137
7.1.1 Tools Dump Commands..........................................................................137
7.1.2 Tools Perform Commands.......................................................................138
7.2 Tools CLI Configuration Commands .......................................................139
7.2.1 Generic Commands.................................................................................139
7.2.1.1 tools .........................................................................................................139
7.2.2 Dump Commands....................................................................................139
7.2.2.1 dump........................................................................................................139
7.2.2.2 eth-ring ....................................................................................................140
7.2.2.3 lag............................................................................................................140
7.2.2.4 persistence ..............................................................................................141
7.2.2.5 submgt.....................................................................................................141
7.2.2.6 summary..................................................................................................141
7.2.2.7 router .......................................................................................................142
7.2.2.8 jumbo-frame ............................................................................................142
7.2.2.9 protocol-counter.......................................................................................142
7.2.2.10 non-protocol-counter ...............................................................................143
7.2.2.11 fib.............................................................................................................143
7.2.2.12 ldp............................................................................................................143
7.2.2.13 fec............................................................................................................144
7.2.2.14 instance ...................................................................................................144
7.2.2.15 interface...................................................................................................145
7.2.2.16 memory-usage.........................................................................................145

8
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
7.2.2.17 peer .........................................................................................................145
7.2.2.18 session ....................................................................................................146
7.2.2.19 sockets ....................................................................................................146
7.2.2.20 timers.......................................................................................................146
7.2.2.21 mpls .........................................................................................................147
7.2.2.22 ftn.............................................................................................................147
7.2.2.23 ilm ............................................................................................................148
7.2.2.24 lspinfo ......................................................................................................148
7.2.2.25 memory-usage.........................................................................................149
7.2.2.26 ospf..........................................................................................................149
7.2.2.27 ospf3........................................................................................................149
7.2.2.28 abr ...........................................................................................................150
7.2.2.29 asbr..........................................................................................................150
7.2.2.30 bad-packet...............................................................................................150
7.2.2.31 leaked-routes...........................................................................................151
7.2.2.32 memory-usage.........................................................................................151
7.2.2.33 request-list ...............................................................................................151
7.2.2.34 retransmission-list....................................................................................152
7.2.2.35 route-summary ........................................................................................152
7.2.2.36 route-table ...............................................................................................152
7.2.2.37 service .....................................................................................................153
7.2.2.38 base-stats ................................................................................................153
7.2.2.39 iom-stats ..................................................................................................153
7.2.2.40 l2pt-diags .................................................................................................154
7.2.2.41 vpls-fdb-stats ...........................................................................................154
7.2.2.42 fdb-mac-with-grp......................................................................................154
7.2.2.43 grp-fdb .....................................................................................................155
7.2.2.44 unqual-fdb................................................................................................155
7.2.2.45 pred .........................................................................................................155
7.2.2.46 pred-cpm-stats.........................................................................................156
7.2.2.47 pred-iom-stats..........................................................................................156
7.2.2.48 pred-grp-cfg .............................................................................................156
7.2.3 Perform Commands ................................................................................157
7.2.3.1 perform ....................................................................................................157
7.2.3.2 cfm...........................................................................................................157
7.2.3.3 mep..........................................................................................................158
7.2.3.4 domain.....................................................................................................158
7.2.3.5 association...............................................................................................158
7.2.3.6 cvlan ........................................................................................................159
7.2.3.7 log............................................................................................................159
7.2.3.8 test-event.................................................................................................159
7.2.3.9 lsp-sync-exit.............................................................................................160
7.2.3.10 run-manual-spf ........................................................................................160
7.2.3.11 mpls .........................................................................................................160
7.2.3.12 cspf ..........................................................................................................161
7.2.3.13 resignal ....................................................................................................161
7.2.3.14 trap-suppress...........................................................................................162
7.2.3.15 refresh-lsas..............................................................................................162
7.2.3.16 run-manual-spf ........................................................................................163

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 9
7.2.3.17 mp-ecmp-rebalance.................................................................................163
7.2.3.18 security ....................................................................................................163
7.2.3.19 service .....................................................................................................164
7.2.3.20 id..............................................................................................................164
7.2.3.21 endpoint...................................................................................................164
7.2.3.22 force-switchover ......................................................................................165
8 Ethernet Connection Fault Management..................................167
8.1 Introduction..............................................................................................167
8.1.1 Acronym Callout ......................................................................................168
8.2 ETH-CFM Building Blocks .......................................................................169
8.2.1 Loopback .................................................................................................172
8.2.2 Link Trace Test........................................................................................172
8.3 Loopback .................................................................................................173
8.4 Linktrace ..................................................................................................173
8.5 Continuity Check (CC).............................................................................174
8.6 Two-Way Delay Measurement (ETH-DMM Y.1731) ...............................176
8.7 Synthetic Loss Measurement (ETH-SL) ..................................................177
8.8 Loss Measurement (ETH-LM) .................................................................178
8.9 Y1731 proactive performance monitoring................................................179
8.9.1 Create Y1731 proactive session..............................................................179
8.9.2 Modify Y1731 proactive session..............................................................180
8.9.3 Delete Y1731 proactive session ..............................................................180
8.10 Y1731 PM Restrictions ............................................................................181
8.11 CLI Command Reference........................................................................181
8.11.1 CFM Commands .....................................................................................181
8.11.2 OAM Commands .....................................................................................182
8.11.3 Show Commands ....................................................................................182
8.12 CLI Commands........................................................................................183
8.12.1 CFM CLI Commands...............................................................................183
8.12.1.1 domain.....................................................................................................183
8.12.1.2 association...............................................................................................184
8.12.1.3 bridge-identifier........................................................................................184
8.12.1.4 mhf-creation.............................................................................................185
8.12.1.5 ccm-interval .............................................................................................185
8.12.1.6 remote-mepid ..........................................................................................186
8.12.1.7 inactivity-timer..........................................................................................186
8.12.1.8 y1731pm..................................................................................................186
8.12.1.9 shutdown .................................................................................................187
8.12.1.10 data-size ..................................................................................................187
8.12.1.11 mac-address............................................................................................188
8.12.1.12 type..........................................................................................................188
8.12.1.13 priority......................................................................................................188
8.12.1.14 period.......................................................................................................189
8.12.1.15 measurement-period ...............................................................................189
8.12.2 OAM CLI Commands ..............................................................................190
8.12.2.1 loopback ..................................................................................................190
8.12.2.2 linktrace ...................................................................................................191
8.12.2.3 two-way-delay-test...................................................................................192
8.12.2.4 two-way-slm-test......................................................................................193

10
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
8.12.2.5 single-ended-loss-test .............................................................................194
8.12.3 Show Commands ....................................................................................194
8.12.3.1 association...............................................................................................194
8.12.3.2 cfm-stack-table ........................................................................................196
8.12.3.3 domain.....................................................................................................197
8.12.3.4 mep..........................................................................................................198
8.12.3.5 mip...........................................................................................................203
8.12.3.6 Y1731 ......................................................................................................203
9 Link Layer Discovery Protocol ..................................................213
9.1 Introduction..............................................................................................213
9.2 LLDP CLI Command Reference..............................................................213
9.2.1 LLDP Commands ....................................................................................213
9.2.2 Show Commands ....................................................................................213
9.3 LLDP CLI Commands..............................................................................214
9.3.1 LLDP Commands ....................................................................................214
9.3.1.1 lldp ...........................................................................................................214
9.3.1.2 message-fast-tx .......................................................................................214
9.3.1.3 message- fast-tx-init ................................................................................215
9.3.1.4 reinit-delay ...............................................................................................215
9.3.1.5 shutdown .................................................................................................215
9.3.1.6 tx-credit-max............................................................................................216
9.3.1.7 tx-hold-multiplier ......................................................................................216
9.3.1.8 tx-interval .................................................................................................217
9.3.2 Show Commands ....................................................................................217
9.3.2.1 lldp ...........................................................................................................217

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 11
List of figures
4 Security..........................................................................................41
Figure 1 Packet Formats .........................................................................................42
6 Events and Logs .........................................................................105
Figure 2 Event Logging Block Diagram .................................................................107
8 Ethernet Connection Fault Management..................................167
Figure 3 MEP and MIP ..........................................................................................171
Figure 4 MEP, MIP and MD levels.........................................................................172
Figure 5 CFM Loopback ........................................................................................173
Figure 6 CFM Linktrace .........................................................................................174
Figure 7 CFM Failure Check..................................................................................175
Figure 8 CFM CC Failure Scenario .......................................................................175

12
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 13
List of tables
2 Introduction...................................................................................21
Table 1 Chapter names and descriptions...............................................................21
Table 2 Command Syntax Symbols .......................................................................22
3 System Management ....................................................................23
Table 3 Priority during default-db activation ...........................................................25
Table 4 Priority during database corruption recovery.............................................26
Table 5 lacp-priority command ...............................................................................29
Table 6 time command...........................................................................................29
Table 7 ntp command.............................................................................................30
Table 8 polling-rate command ................................................................................30
Table 9 server command........................................................................................30
Table 10 shutdown command ..................................................................................31
Table 11 user-user-hairpin command.......................................................................31
Table 12 vlan-dot1q-etype command .......................................................................31
Table 13 display-config command............................................................................32
Table 14 enable-tech command ...............................................................................32
Table 15 save command ..........................................................................................33
Table 16 software-mngt ihub database oam-save-protected command ..................33
Table 17 core1-cpu command..................................................................................33
Table 18 Show System CPU Output Fields..............................................................34
Table 19 core1-memory-pools command.................................................................34
Table 20 Show Memory Pool Output Fields .............................................................34
Table 21 ntp command.............................................................................................35
Table 22 servers command ......................................................................................35
Table 23 server command........................................................................................35
Table 24 user-user-hairpin command.......................................................................36
Table 25 vlan-dot1q-etype command .......................................................................36
Table 26 core1-uptime command.............................................................................36
Table 27 System Timing Output Fields ....................................................................36
Table 28 ipv6-prefix-mgmt command .......................................................................37
Table 29 dst-ip command .........................................................................................37
Table 30 src-ip command .........................................................................................37
Table 31 alarm command.........................................................................................38
4 Security..........................................................................................41
Table 32 Keychain mapping.....................................................................................43
Table 33 description command ................................................................................49
Table 34 shutdown command ..................................................................................50
Table 35 address-type command .............................................................................50
Table 36 cpu-filter command....................................................................................51
Table 37 default-action command ............................................................................51
Table 38 ip-filter command .......................................................................................52
Table 39 entry command..........................................................................................52
Table 40 action command ........................................................................................53
Table 41 match command ........................................................................................54

14
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
Table 42 IP Protocol Names.....................................................................................54
Table 43 dscp command ..........................................................................................55
Table 44 dst-ip command .........................................................................................56
Table 45 dst-port command......................................................................................56
Table 46 fragment command....................................................................................57
Table 47 icmp-code command .................................................................................57
Table 48 icmp-type command ..................................................................................58
Table 49 option-present command...........................................................................58
Table 50 service command ......................................................................................59
Table 51 src-ip command .........................................................................................59
Table 52 src-port command......................................................................................59
Table 53 tcp-ack command ......................................................................................60
Table 54 tcp-syn command ......................................................................................60
Table 55 shutdown command ..................................................................................61
Table 56 ipv6-filter command ...................................................................................61
Table 57 entry command..........................................................................................62
Table 58 action command ........................................................................................62
Table 59 match command ........................................................................................62
Table 60 dscp command ..........................................................................................63
Table 61 dst-ip command .........................................................................................64
Table 62 dst-port command......................................................................................64
Table 63 icmp-code command .................................................................................65
Table 64 icmp-type command ..................................................................................65
Table 65 router command ........................................................................................65
Table 66 service command ......................................................................................66
Table 67 src-ip command .........................................................................................66
Table 68 src-port command......................................................................................67
Table 69 tcp-ack command ......................................................................................67
Table 70 tcp-syn command ......................................................................................67
Table 71 shutdown command ..................................................................................68
Table 72 renum command........................................................................................68
Table 73 keychain command....................................................................................69
Table 74 direction command ....................................................................................69
Table 75 bi command ...............................................................................................70
Table 76 uni command .............................................................................................70
Table 77 receive command ......................................................................................70
Table 78 send command ..........................................................................................71
Table 79 entry command..........................................................................................71
Table 80 begin-time command .................................................................................72
Table 81 end-time command....................................................................................73
Table 82 tolerance command ...................................................................................73
Table 83 tcp-option-number command.....................................................................74
Table 84 receive command ......................................................................................74
Table 85 send command ..........................................................................................75
Table 86 cpu-filter ip-filter command ........................................................................75
Table 87 cpu-filter ipv6-filter command ....................................................................76
Table 88 keychain command....................................................................................76
5 Monitor Commands ......................................................................77
Table 89 CLI Monitor Command Contexts ...............................................................77

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 15
Table 90 filter command...........................................................................................78
Table 91 ip command ...............................................................................................79
Table 92 ipv6 command ...........................................................................................80
Table 93 mac command...........................................................................................81
Table 94 lag command .............................................................................................83
Table 95 port command............................................................................................84
Table 96 router command ........................................................................................86
Table 97 neighbor command....................................................................................87
Table 98 statistics command ....................................................................................88
Table 99 session command......................................................................................91
Table 100 statistics command ....................................................................................94
Table 101 interface command....................................................................................96
Table 102 neighbor command..................................................................................100
Table 103 neighbor command..................................................................................102
Table 104 service command ....................................................................................102
Table 105 id command .............................................................................................103
Table 106 sdp command ..........................................................................................103
6 Events and Logs .........................................................................105
Table 107 Event Severity Levels ..............................................................................106
Table 108 Valid Filter Policy Operators ....................................................................110
Table 109 Log Entry Field Descriptions....................................................................111
Table 110 description command ..............................................................................122
Table 111 shutdown command ................................................................................122
Table 112 event-control command ...........................................................................123
Table 113 filter command.........................................................................................124
Table 114 default-action command ..........................................................................125
Table 115 action command ......................................................................................125
Table 116 entry command........................................................................................126
Table 117 match command ......................................................................................127
Table 118 application command...............................................................................127
Table 119 number command....................................................................................128
Table 120 router command ......................................................................................129
Table 121 severity command ...................................................................................129
Table 122 subject command ....................................................................................130
Table 123 from command.........................................................................................130
Table 124 log-id command .......................................................................................131
Table 125 to command.............................................................................................132
Table 126 event-control command ...........................................................................132
Table 127 Event Control Output Fields ....................................................................133
Table 128 filter-id command .....................................................................................133
Table 129 Filter ID Output Fields..............................................................................134
Table 130 log-id command .......................................................................................134
Table 131 Log ID Output Fields................................................................................134
Table 132 log-id command .......................................................................................135
7 Tools ............................................................................................137
Table 133 tools command ........................................................................................139
Table 134 dump command.......................................................................................139
Table 135 eth-ring command....................................................................................140

16
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
Table 136 lag command ...........................................................................................140
Table 137 persistence command .............................................................................141
Table 138 submgt command ....................................................................................141
Table 139 summary command .................................................................................141
Table 140 router command ......................................................................................142
Table 141 jumbo-frame command............................................................................142
Table 142 protocol-counter command......................................................................142
Table 143 non-protocol-counter command...............................................................143
Table 144 fib command............................................................................................143
Table 145 ldp command ...........................................................................................143
Table 146 fec command ...........................................................................................144
Table 147 instance command ..................................................................................144
Table 148 interface command..................................................................................145
Table 149 memory-usage command........................................................................145
Table 150 peer command.........................................................................................145
Table 151 session command....................................................................................146
Table 152 sockets command....................................................................................146
Table 153 timers command ......................................................................................146
Table 154 mpls command ........................................................................................147
Table 155 ftn command............................................................................................147
Table 156 ilm command ...........................................................................................148
Table 157 lspinfo command .....................................................................................148
Table 158 memory-usage command........................................................................149
Table 159 ospf command.........................................................................................149
Table 160 ospf3 command .......................................................................................149
Table 161 abr command...........................................................................................150
Table 162 asbr command.........................................................................................150
Table 163 bad-packet command ..............................................................................150
Table 164 leaked-routes command ..........................................................................151
Table 165 memory-usage command........................................................................151
Table 166 request-list command ..............................................................................151
Table 167 retransmission-list command...................................................................152
Table 168 route-summary command........................................................................152
Table 169 route-table command...............................................................................152
Table 170 service command ....................................................................................153
Table 171 base-stats command ...............................................................................153
Table 172 iom-stats command .................................................................................153
Table 173 l2pt-diags command ................................................................................154
Table 174 vpls-fdb-stats command ..........................................................................154
Table 175 fdb-mac-with-grp command.....................................................................154
Table 176 grp-fdb command ....................................................................................155
Table 177 unqual-fdb command...............................................................................155
Table 178 pred command.........................................................................................155
Table 179 pred-cpm-stats command........................................................................156
Table 180 pred-iom-stats command.........................................................................156
Table 181 pred-grp-cfg command ............................................................................156
Table 182 perform command ...................................................................................157
Table 183 cfm command ..........................................................................................157
Table 184 mep command.........................................................................................158

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10 3HH-11982-AAAA-TQZZA 17
Table 185 domain command ....................................................................................158
Table 186 association command..............................................................................158
Table 187 cvlan command .......................................................................................159
Table 188 log command ...........................................................................................159
Table 189 test-event command ................................................................................159
Table 190 lsp-sync-exit command............................................................................160
Table 191 run-manual-spf command........................................................................160
Table 192 mpls command ........................................................................................160
Table 193 cspf command .........................................................................................161
Table 194 resignal command ...................................................................................161
Table 195 trap-suppress command..........................................................................162
Table 196 refresh-lsas command .............................................................................162
Table 197 run-manual-spf command........................................................................163
Table 198 mp-ecmp-rebalance command................................................................163
Table 199 security command ...................................................................................163
Table 200 service command ....................................................................................164
Table 201 id command .............................................................................................164
Table 202 endpoint command ..................................................................................164
Table 203 force-switchover command......................................................................165
8 Ethernet Connection Fault Management..................................167
Table 204 Acronyms.................................................................................................168
Table 205 ETH-CFM Support Matrix ........................................................................171
Table 206 domain command ....................................................................................183
Table 207 association command..............................................................................184
Table 208 bridge-identifier command .......................................................................184
Table 209 mhf-creation command............................................................................185
Table 210 ccm-interval command ............................................................................185
Table 211 remote-mepid command..........................................................................186
Table 212 inactivity-timer command.........................................................................186
Table 213 y1731pm command .................................................................................186
Table 214 shutdown command ................................................................................187
Table 215 data-size command .................................................................................187
Table 216 mac-address command ...........................................................................188
Table 217 type command .........................................................................................188
Table 218 priority command .....................................................................................188
Table 219 period command......................................................................................189
Table 220 measurement-period command...............................................................189
Table 221 loopback command .................................................................................190
Table 222 linktrace command ..................................................................................191
Table 223 two-way-delay-test command..................................................................192
Table 224 two-way-slm-test command.....................................................................193
Table 225 single-ended-loss-test command.............................................................194
Table 226 association command..............................................................................194
Table 227 Show eth-cfm association command output fields ..................................195
Table 228 cfm-stack-table command .......................................................................196
Table 229 Show eth-cfm cfm-stack-table command output fields ............................196
Table 230 domain command ....................................................................................197
Table 231 Show eth-cfm domain command output fields.........................................197
Table 232 mep command.........................................................................................198

18
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
Table 233 Show eth-cfm mep command output fields .............................................198
Table 234 ETH-CFM MEP Delay Measurement Test Field Descriptions.................200
Table 235 ETH-CFM MEP Loss Measurement Test Field Descriptions ..................201
Table 236 ETH-CFM MEP Synthetic Loss Measurement Test Field
Descriptions.............................................................................................202
Table 237 mip command ..........................................................................................203
Table 238 Show eth-cfm mip command output fields...............................................203
Table 239 Y1731 proactive loss session – show field Descriptions .........................204
Table 240 Y1731 proactive delay session – show field Descriptions .......................208
9 Link Layer Discovery Protocol ..................................................213
Table 241 lldp command ..........................................................................................214
Table 242 message-fast-tx command ......................................................................214
Table 243 message-fast-tx-init command ................................................................215
Table 244 reinit-delay command ..............................................................................215
Table 245 shutdown command ................................................................................215
Table 246 tx-credit-max command ...........................................................................216
Table 247 tx-hold-multiplier command .....................................................................216
Table 248 tx-interval command ................................................................................217
Table 249 lldp command ..........................................................................................217
Table 250 LLDP configuration output fields..............................................................217
Table 251 LLDP Local System Information output fields..........................................218
Table 252 LLDP Destination Addresses output fields ..............................................218
Table 253 LLDP Remote Statistics output fields ......................................................218
Table 254 LLDP System Management Address output fields ..................................219

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Preface
Issue: 10 3HH-11982-AAAA-TQZZA 19
1Preface
This preface provides general information about the documentation set for the
7302 Intelligent Services Access Manager (7302 ISAM), the 7330 Intelligent
Services Access Manager Fiber to the Node (7330 ISAM FTTN) and the
7360 Intelligent Services Access Manager FX (7360 ISAM FX).
1.1 Scope
This documentation set provides information about safety, features and functionality,
ordering, hardware installation and maintenance, CLI and TL1 commands, and
software upgrade and migration procedures for the current release.
1.2 Audience
This documentation set is intended for planners, administrators, operators, and
maintenance personnel involved in installing, upgrading, or maintaining the
7302 ISAM, the 7330 ISAM FTTN or the 7360 ISAM FX.
1.3 Required knowledge
Readers must be familiar with general telecommunications principles.
1.4 Product naming
When the term “ISAM” is used alone, then the 7302 ISAM, the 7330 ISAM FTTN and
the 7360 ISAM FX are meant. If a feature is valid for only one of the products, the
applicability will be explicitly stated.
1.5 Documents
Refer to the Product Information document for your product to see a list of all relevant
customer documents and their part numbers.
1.6 Acronyms and initialisms
See the ISAM Glossary for the expansion of acronyms and initialisms used in this
documentation set.

Preface
20
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
1.7 Safety information
For safety information, see the Safety Manual for your product.
1.8 Special information
The following are examples of how special information is presented in this document.
1.9 Release notes
Be sure to refer to the release notes (such as the Customer Release Notes or
Emergency Fix Release Note) issued for software loads of your product before you
install or use the product. The release notes provide important information about the
software load.
Danger — Danger indicates that the described activity or
situation may result in serious personal injury or death; for
example, high voltage or electric shock hazards.
Warning — Warning indicates that the described activity or
situation may, or will, cause equipment damage or serious
performance problems.
Caution — Caution indicates that the described activity or
situation may, or will, cause service interruption.
Note — A note provides information that is, or may be, of
special interest.