Nokia 7368 User manual

7368 Intelligent Services Access
Manager ONT
G-2426G-A Product Guide
3FE-XXXXX-AAAA-TCZZA
Issue 1
September 2020
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements

Legal notice
Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or
tradenames of their respective owners.
The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein.
© 2020 Nokia.
Contains proprietary/trade secret information which is the property of Nokia and must not be made available to, or copied or used by
anyone outside Nokia without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
2 Issue 1

Contents
About this document............................................................................................................................................7
1 ETSI ONT safety guidelines ........................................................................................................................13
1.1 Safety instructions.............................................................................................................................13
1.2 Safety standards compliance ............................................................................................................15
1.3 Electrical safety guidelines................................................................................................................15
1.4 ESD safety guidelines .......................................................................................................................16
1.5 Laser safety guidelines .....................................................................................................................16
1.6 Environmental requirements .............................................................................................................20
2 ETSI environmental and CRoHS guidelines ..............................................................................................21
2.1 Environmental labels.........................................................................................................................21
2.2 Hazardous Substances Table (HST) .................................................................................................23
2.3 Other environmental requirements....................................................................................................23
3 ANSI ONT safety guidelines........................................................................................................................25
3.1 Safety instructions.............................................................................................................................25
3.2 Safety standards compliance ............................................................................................................27
3.3 Laser safety guidelines .....................................................................................................................29
3.4 Electrical safety guidelines................................................................................................................32
3.5 ESD safety guidelines .......................................................................................................................33
3.6 Environmental requirements .............................................................................................................33
4 G-2426G-A unit data sheet ..........................................................................................................................35
4.1 Overview ...........................................................................................................................................35
4.2 G-2426G-A part numbers and identification......................................................................................35
4.3 G-2426G-A general description.........................................................................................................37
4.4 G-2426G-A software and installation feature support .......................................................................43
4.5 G-2426G-A interfaces and interface capacity ...................................................................................43
4.6 G-2426G-A LEDs ..............................................................................................................................45
4.7 G-2426G-A detailed specifications....................................................................................................47
4.8 G-2426G-A GEM ports and T-CONTs ...............................................................................................48
4.9 G-2426G-A performance monitoring statistics ..................................................................................48
4.10 G-2426G-A functional blocks ............................................................................................................50
4.11 G-2426G-A standards compliance ....................................................................................................51
4.12 G-2426G-A special considerations....................................................................................................53
Contents 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 3
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

5 Install a G-2426G-A indoor ONT..................................................................................................................55
5.1 Overview ...........................................................................................................................................55
5.2 Purpose.............................................................................................................................................55
5.3 General .............................................................................................................................................55
5.4 Prerequisites .....................................................................................................................................55
5.5 Recommended tools .........................................................................................................................55
5.6 Safety information .............................................................................................................................56
5.7 Procedure..........................................................................................................................................56
6 Replace a G-2426G-A indoor ONT ..............................................................................................................61
6.1 Overview ...........................................................................................................................................61
6.2 Purpose.............................................................................................................................................61
6.3 General .............................................................................................................................................61
6.4 Prerequisites .....................................................................................................................................61
6.5 Recommended tools .........................................................................................................................61
6.6 Safety information .............................................................................................................................62
6.7 Procedure..........................................................................................................................................62
7 Configure a G-2426G-A indoor ONT ...........................................................................................................67
7.1 Overview ...........................................................................................................................................67
GUI configuration.........................................................................................................................................70
7.2 General configuration........................................................................................................................70
7.3 HGU mode GUI configuration ...........................................................................................................70
7.4 Log in to the web-based GUI ............................................................................................................70
Viewing device information and connection status .................................................................................72
7.5 Overview ...........................................................................................................................................72
7.6 Viewing device information................................................................................................................72
7.7 Viewing LAN status ...........................................................................................................................74
7.8 Viewing WAN status..........................................................................................................................76
7.9 Viewing WAN IPv6 status..................................................................................................................78
7.10 Viewing home networking information...............................................................................................80
7.11 Viewing Optics module status ...........................................................................................................82
7.12 Viewing statistics...............................................................................................................................84
7.13 Viewing voice information..................................................................................................................86
Network configuration .................................................................................................................................89
7.14 Overview ...........................................................................................................................................89
7.15 Configuring LAN................................................................................................................................89
7.16 Configuring LAN IPv6........................................................................................................................92
Contents 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
4 Issue 1

7.17 Configuring WAN...............................................................................................................................93
7.18 Configuring WAN DHCP ...................................................................................................................95
7.19 Configuring Wireless 2.4GHz............................................................................................................97
7.20 Configuring Wireless 5GHz.............................................................................................................100
7.21 Configuring wireless scheduling......................................................................................................103
7.22 Configuring IP routing .....................................................................................................................105
7.23 Configuring DNS .............................................................................................................................107
7.24 Configuring TR-069.........................................................................................................................109
7.25 Configuring GRE tunnel ..................................................................................................................110
7.26 Configuring Upstream (US) Classifier ............................................................................................112
7.27 Configuring QoS..............................................................................................................................119
Security configuration ...............................................................................................................................123
7.28 Overview .........................................................................................................................................123
7.29 Configuring the firewall....................................................................................................................123
7.30 Configuring the MAC filter ...............................................................................................................124
7.31 Configuring the IP filter....................................................................................................................126
7.32 Configuring the URL filter ................................................................................................................128
7.33 Configuring parental control ............................................................................................................129
7.34 Configuring DMZ and ALG ..............................................................................................................131
7.35 Configuring access control..............................................................................................................133
Configuring the Application ......................................................................................................................136
7.36 Overview .........................................................................................................................................136
7.37 Configuring port forwarding.............................................................................................................136
7.38 Configuring port triggering...............................................................................................................138
7.39 Configuring DDNS...........................................................................................................................140
7.40 Configuring NTP..............................................................................................................................142
7.41 Configuring USB .............................................................................................................................143
7.42 Configuring UPnP and DLNA ..........................................................................................................145
7.43 Configuring voice ............................................................................................................................146
Maintenance ...............................................................................................................................................149
7.44 Overview .........................................................................................................................................149
7.45 Configuring the password ...............................................................................................................149
7.46 WAN speed test ..............................................................................................................................151
7.47 Speed test history ...........................................................................................................................152
7.48 Configuring LOID ............................................................................................................................154
7.49 Configuring SLID.............................................................................................................................155
7.50 Managing the device .......................................................................................................................156
Contents 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 5
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

7.51 Backing up the configuration...........................................................................................................158
7.52 Restoring the configuration .............................................................................................................159
7.53 Upgrading firmware.........................................................................................................................160
7.54 Rebooting the device ......................................................................................................................161
7.55 Resetting to factory defaults............................................................................................................162
7.56 Diagnosing WAN connections.........................................................................................................163
7.57 Viewing log files ..............................................................................................................................164
RG Troubleshooting Counters..................................................................................................................167
7.58 Overview .........................................................................................................................................167
7.59 Viewing Residential Gateway (RG) troubleshooting counters.........................................................167
8 ONT configuration file over OMCI ............................................................................................................171
8.1 Overview .........................................................................................................................................171
8.2 Purpose...........................................................................................................................................171
8.3 Supported configuration file types...................................................................................................171
8.4 ONT configuration file over OMCI ...................................................................................................174
Contents 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
6 Issue 1

About this document
Purpose
This documentation set provides information about safety, features and functionality, ordering,
hardware installation and maintenance, and software installation procedures of this ONT for the
current release.
Intended audience
This documentation set is intended for planners, administrators, operators, and maintenance
personnel involved in installing, upgrading, or maintaining the ONTs.
The reader must be familiar with general telecommunications principles.
Safety information
For your safety, this document contains safety statements. Safety statements are given at points
where risks of damage to personnel, equipment, and operation may exist. Failure to follow the
directions in a safety statement may result in serious consequences.
Safety Information Examples
DANGER
Hazard
Danger indicates that the described activity or situation may result in serious personal injury or
death; for example, high voltage or electric shock hazards.
WARNING
Equipment Damage
Warning indicates that the described activity or situation may, or will, cause equipment damage or
serious performance problems.
CAUTION
Service Disruption
Caution indicates that the described activity or situation may, or will, cause service interruption.
Note:A note provides information that is, or may be, of special interest.
Acronyms and initialisms
The expansions and optional descriptions of most acronyms and initialisms appear in the glossary
About this document 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 7
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

Nokia quality processes
Nokia’s ONT manufacturing, testing, and inspecting practices are in compliance with TL 9000
requirements. These requirements are documented in the Fixed Networks Quality Manual 3FQ-
30146-6000-QRZZA.
The quality practices adequately ensure that technical requirements and customer end-point
requirements are met. The customer or its representatives may be allowed to perform on-site
quality surveillance audits, as agreed upon during contract negotiations.
Documents
Documents are available using ALED or OLCS.
To download a ZIP file package of the customer documentation
1
Navigate to http://customer.nokia.com/s/ and enter your user name and password. If you are a
new user and require access to this service, please contact your Nokia sales representative.
2
Select Products.
3
Type your product name in the Find and select a product field and click the search icon.
Select a product.
4
Click Downloads: ALED to go to the Electronic Delivery: Downloads page.
5
Select Documentation from the list.
6
Select a release from the list.
7
Follow the on-screen directions to download the file.
END OF STEPS
To access individual documents
Individual PDFs of customer documents are also accessible through the Nokia Support Portal
website.
About this document 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
8 Issue 1

1
Navigate to http://customer.nokia.com/s/ and enter your user name and password. If you are a
new user and require access to this service, please contact your Nokia sales representative.
2
Select Products.
3
Type your product name in the Find and select a product field and click the search icon.
Select a product.
4
Click Documentation: Doc Center to go to the product page in the Doc Center.
5
Select a release from the Release list and click SEARCH.
6
Click on the PDF icon to open or save the file.
END OF STEPS
Procedures with options or substeps
When there are options in a procedure, they are identified by letters. When there are required
substeps in a procedure, they are identified by roman numerals.
Example of options in a procedure
At Step 1, you can choose option a or b. At Step 2, you must do what the step indicates.
1
This step offers two options. You must choose one of the following:
a. This is one option.
b. This is another option.
2
You must perform this step.
END OF STEPS
Example of required substeps in a procedure
At Step 1, you must perform a series of substeps within a step. At Step 2, you must do what the
step indicates.
About this document 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 9
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

1
This step has a series of substeps that you must perform to complete the step. You must
perform the following substeps:
a. This is the first substep.
b. This is the second substep.
c. This is the third substep.
2
You must perform this step.
END OF STEPS
Multiple PDF document search
You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term.
Adobe Reader displays the results in a single display panel. The results are grouped by PDF file,
and you can expand the entry for each file.
Note:The PDF files in which you search must be in the same folder.
To search multiple PDF files for a common term
1
Open Adobe Acrobat Reader.
2
Select Edit→Search from the Acrobat Reader main menu. The Search PDF panel displays.
3
Enter the search criteria.
4
Select All PDF Documents In.
5
Select the folder in which to search using the list.
6
Click Search.
Acrobat Reader displays the search results. You can expand the entries for each document by
clicking on the + symbol.
END OF STEPS
About this document 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
10 Issue 1

Technical support
For details, refer to the Nokia Support portal (https://customer.nokia.com/support/s/).
For ordering information, contact your Nokia sales representative.
How to comment
Note to reviewers: The following "How to comment" text will appear in the final document when it is
published. However, the feedback method described below is for use only on final documents.
Please send your review comments to the author using the process you were given when you
received this draft document.
To comment on this document, go to the Online Comment Form (https://documentation.nokia.com/
comments/) or e-mail your comments to the Comments Hotline (mailto:[email protected]).
About this document 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 11
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

About this document 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
12 Issue 1

1 ETSI ONT safety guidelines
This chapter provides information about the mandatory regulations that govern the installation and
operation of the optical network terminals (ONTs).
1.1 Safety instructions
This section describes the safety instructions that are provided in the ONT customer documentation
and on the equipment.
1.1.1 Safety instruction boxes
The safety instruction boxes are provided in the ONT customer documentation. Observe the
instructions to meet safety requirements.
The following is an example of the Danger box.
DANGER
Hazard
Possibility of personal injury.
The Danger box indicates that the described activity or situation may pose a threat to personal
safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to,
may result in death or serious physical harm.
Do not proceed beyond a Danger box until the indicated conditions are fully understood and met.
The following is an example of the Warning box.
WARNING
Equipment Damage
Possibility of equipment damage.
Possibility of data loss.
The Warning box indicates that the described activity or situation may, or will, cause equipment
damage, loss of data, or serious performance problems. It identifies a possible equipment-
damaging situation or provides essential information to avoid the degradation of system operations
or data.
Do not proceed beyond a warning until the indicated conditions are fully understood and met.
The following is an example of the Caution box.
ETSI ONT safety guidelines
Safety instructions 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 13
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

CAUTION
Service Disruption
Possibility of service interruption.
Service interruption.
The Caution box indicates that the described activity or situation may, or will, cause service
interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood and met.
The following is an example of the Note box.
Note: Information of special interest.
The Note box provides information that assists the personnel working with ONTs. It does not
provide safety-related instructions.
1.1.2 Safety-related labels
The ONT equipment is labeled with the specific safety instructions and compliance information that
is related to a variant of the ONT. Observe the instructions on the safety labels.
Table 1-1, “Safety labels” (p. 13) provides sample safety labels on the ONT equipment.
Table 1-1 Safety labels
Description Label text
ESD warning Caution: This assembly contains an electrostatic sensitive device.
Laser classification Class 1 laser product
PSE marking These power supplies are Japan PSE certified and compliant with Japan VCCI emissions
standards.
Figure 1-1, “PSE certification” (p. 14) shows the PSE certification.
Figure 1-1 PSE certification
This is a Class B product based on the standard of the Voluntary Control Council for Interference
from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in
a domestic environment, it may cause radio interference. Install and use the equipment according
to the instruction manual.
Warning
19841
ETSI ONT safety guidelines
Safety instructions 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
14 Issue 1

1.2 Safety standards compliance
This section describes the ONT compliance with the European safety standards.
1.2.1 EMC, EMI, and ESD compliance
The ONT equipment complies with the following EMC, EMI, and ESD requirements:
• EN 300-328 v1.9.1 wide band data transmission standards for 2.4GHz bands
• EN 300-386 V1.5.1: Electromagnetic Compatibility and Radio Spectrum Matters (ERM):
Telecommunications Network Equipment; Electromagnetic Compatibility (EMC) requirements;
Electrostatic Discharge (ESD) requirements
• EN 55022 (2006): Class B, Information Technology Equipment, Radio Disturbance
Characteristics, limits and methods of measurement
• EN 55024 (2010): Information Technology Equipment, Immunity Characteristics, limits and
methods of measurement
• European Council Directive 2004/108/EC
• EN 300-386 V1.4.1: 2008
• EN 55022:2006 Class B (ONTs)
1.2.2 Equipment safety standard compliance
The ONT equipment complies with the requirements of EN 60950-1, Safety of Information
Technology Equipment for use in a restricted location (per R-269).
1.2.3 Environmental standard compliance
The ONT equipment complies with the EN 300 019 European environmental standards.
1.2.4 Laser product standard compliance
For most ONTs, the ONT equipment complies with EN 60825-1 and IEC 60825-2 for laser products.
If there is an exception to this compliance regulation, you can find this information in the standards
compliance section of the unit data sheet in this Product Guide.
1.2.5 Resistibility requirements compliance
The ONT equipment complies with the requirements of ITU Recommendation K.21 for resistibility of
telecommunication equipment installed in customer premises to over voltage and over currents.
1.2.6 Acoustic noise emission standard compliance
The ONT equipment complies with EN 300 753 acoustic noise emission limit and test methods.
1.3 Electrical safety guidelines
This section provides the electrical safety guidelines for the ONT equipment.
Note: The ONTs comply with the U.S. National Electrical Code. However, local electrical
authorities have jurisdiction when there are differences between the local and U.S. standards.
ETSI ONT safety guidelines
Safety standards compliance 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 15
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

The ONTs comply with BS EN 61140.
1.3.1 Power supplies
The use of any non-Nokia approved power supplies or power adapters is not supported or
endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use
greatly increases the danger of damage to equipment or property.
1.3.2 Cabling
The following are the guidelines regarding cables used for the ONT equipment:
• All cables must be approved by the relevant national electrical code.
• The cables for outdoor installation of ONTs must be suitable for outdoor use.
• POTS wiring run outside the subscriber premises must comply with the requirements of local
electrical codes. In some markets, the maximum allowed length of the outside run is 140 feet (43
m). If the outside run is longer, NEC requires primary protection at both the exit and entry points
for the wire.
1.3.3 Protective earth
Earthing and bonding of the ONTs must comply with the requirements of local electrical codes.
1.4 ESD safety guidelines
The ONT equipment is sensitive to ESD. Operations personnel must observe the following ESD
instructions when they handle the ONT equipment.
CAUTION
Service Disruption
This equipment is ESD sensitive. Proper ESD protections should be used when you enter the
TELCO Access portion of the ONT.
During installation and maintenance, service personnel must wear wrist straps to prevent damage
caused by ESD.
1.5 Laser safety guidelines
Observe the following instructions when you perform installation, operations, and maintenance
tasks on the ONT equipment.
Only qualified service personnel who are extremely familiar with laser radiation hazards should
install or remove the fiber optic cables and units in this system.
ETSI ONT safety guidelines
ESD safety guidelines 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
16 Issue 1

DANGER
Hazard
There may be invisible laser radiation at the fiber optic cable when the cable is removed from the
connector. Avoid direct exposure to the laser beam.
Observe the following danger for laser hazard. Eyes can be damaged when they are exposed to a
laser beam. Take necessary precautions before you plug in the optical modules.
DANGER
Hazard
Possibility of equipment damage. Risk of eye damage by laser radiation.
1.5.1 Laser classification
The ONT is classified as a Class 1 laser product based on its transmit optical output.
Laser warning labels
The following figures show the labels related to laser product, classification and warning.
Figure 1-2, “Laser product label” (p. 16) shows a laser product label.
Figure 1-3, “Laser classification label” (p. 18) shows a laser classification label. Laser classification
labels may be provided in other languages.
Figure 1-2 Laser product label
18455
ETSI ONT safety guidelines
Laser safety guidelines 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 17
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

Figure 1-4, “Laser warning labels” (p. 19) shows a laser warning label and an explanatory label for
laser products. Labels and warning may be provided in other languages. The explanatory label
provides the following information:
• a warning that calls attention to the invisible laser radiation
• an instruction against staring into the beam or viewing directly with optical instruments
• wavelength
• normal output power
• maximum output power
Figure 1-3 Laser classification label
LASER CLASSE 1CLASE 1 DEL LASER
CLASS 1 LASER PRODUCT PRODUCTO LASER CLASE 1
18992
'
'
ETSI ONT safety guidelines
Laser safety guidelines 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
18 Issue 1

1.5.2 Transmit optical output
The maximum transmit optical output of an ONT is +5 dBm.
1.5.3 Normal laser operation
In normal operation, fiber cable laser radiation is always off until it receives signal from the line
terminal card.
Eyes can be damaged when they exposed to a laser beam. Operating personnel must observe the
instructions on the laser explanatory label before plugging in the optical module.
DANGER
Hazard
Risk of eye damage by laser radiation.
1.5.4 Location class
Use cable supports and guides to protect the receptacles from strain.
Figure 1-4 Laser warning labels
INVISIBLE LASER RADIATION
DO NOT STARE INTO BEAM
OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
Wavelength(s): xxxx nm
Normal output power: xx m W
Max output power: yyy m W
Laser Warning Label Laser Warning Label
CLASS 1 LASER PRODUCT
INVISIBLE LASER RADIATION PRESENT AT FIBER OPTIC CABLE
WHEN NOT CONNECTED. AVOID DIRECT EXPOSURE TO BEAM.
RAYONNEMENT LASER CLASSE 1
RAYONNEMENT LASER INVISIBLE
EVITER TOUTE EXPOSITION AU FAISCEAU
NE PAS DEMONTER. FAIRE APPEL A UN PERSONNELL QUALIFIE
CLASE 1 DEL LASER
RADIACION DE LASER INVISIBLE. EVITAR CUALOUIER EXPOSICION AL
RAYO LASER. NO DESMONTAR. LLAMAR A PERSONAL AUTORIZADO
Laser Warning Label
18993
'
ETSI ONT safety guidelines
Laser safety guidelines 7368 ISAM ONT
Draft Draft
September 2020
Issue 1 19
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

1.6 Environmental requirements
See the ONT technical specification documentation for more information about temperature ranges.
During operation in the supported temperature range, condensation inside the ONT caused by
humidity is not an issue. To avoid condensation caused by rapid changes in temperature and
humidity, Nokia recommends:
• The door of the ONT not be opened until temperature inside and outside the enclosure has
stabilized.
• If the door of the ONT must be opened after a rapid change in temperature or humidity, use a dry
cloth to wipe down the metal interior to prevent the risk of condensation.
• When high humidity is present, installation of a cover or tent over the ONT helps prevent
condensation when the door is opened.
ETSI ONT safety guidelines
Environmental requirements 7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
20 Issue 1