Nokia 7368 ISAM ONT E-240G-B User manual

Nokia — Proprietary and confidential
Use pursuant to applicable agreements
7368 Intelligent Services Access
Manager ONT
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA
Issue: 01
7368 ISAM ONT E-240G-B Product Guide
Release 06.01.01 | June 2019 | Edition 09

2
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
Nokia is a registered trademark of Nokia Corporation. Other products and company
names mentioned herein may be trademarks or tradenames of their respective
owners.
The information presented is subject to change without notice. No responsibility is
assumed for inaccuracies contained herein.
© 2019 Nokia.
Contains proprietary/trade secret information which is the property of Nokia and must
not be made available to, or copied or used by anyone outside Nokia without its
written authorization. Not to be used or disclosed except in accordance with
applicable agreements.
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide Preface
Issue: 01 3FE-46261-AAAA-TCZZA 3
1Preface
This preface provides general information about the documentation set for optical
network terminals (ONUs).
1.1 Scope
This documentation set provides information about safety, features and functionality,
ordering, hardware installation and maintenance, and software installation
procedures for the current release.
1.2 Audience
This documentation set is intended for planners, administrators, operators, and
maintenance personnel involved in installing, upgrading, or maintaining the ONUs.
1.3 Required knowledge
The reader must be familiar with general telecommunications principles.
1.4 Acronyms and initialisms
The expansions and optional descriptions of most acronyms and initialisms appear
in the glossary.
1.5 Assistance and ordering phone numbers
Nokia provides global technical support through regional call centers. Phone
numbers for the regional call centers are available at the following URL:
http://support.alcatel-lucent.com.
For ordering information, contact your Nokia sales representative.
Release 06.01.01 | June 2019 | Edition 09

Preface
4
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
1.6 Nokia quality processes
Nokia’s ONU quality practices are in compliance with TL 9000 requirements. These
requirements are documented in the Fixed Networks Quality Manual
3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical
requirements and customer end-point requirements are met. The customer or its
representatives may be allowed to perform on-site quality surveillance audits, as
agreed upon during contract negotiations.
1.7 Safety information
For safety information, see the appropriate safety guidelines chapter.
1.8 Documents
Documents are available using ALED or OLCS.
Procedure 1 To download a ZIP file package of the customer documentation
1Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you
are a new user and require access to this service, please contact your Nokia sales
representative.
2From the Technical Content for drop-down menu, choose the product.
3Click on Downloads: Electronic Delivery.
4Choose Documentation from the drop-down menu and click Next.
5Select the image from the drop-down menu and click Next.
6Follow the on-screen directions to download the file.
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide Preface
Issue: 01 3FE-46261-AAAA-TCZZA 5
Procedure 2 To access individual documents
Individual PDFs of customer documents are also accessible through the Nokia Customer Support
website.
1Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you
are a new user and require access to this service, please contact your Nokia sales
representative.
2From the Technical Content for drop-down menu, choose the product.
3Click on Manuals and Guides to display a list of customer documents by title and part
number. You can filter this list using the Release drop-down menu.
4Click on the PDF to open or save the file.
1.9 Special information
The following are examples of how special information is presented in this document.
Danger — Danger indicates that the described activity or
situation may result in serious personal injury or death; for
example, high voltage or electric shock hazards.
Warning — Warning indicates that the described activity or
situation may, or will, cause equipment damage or serious
performance problems.
Caution — Caution indicates that the described activity or
situation may, or will, cause service interruption.
Note — A note provides information that is, or may be, of
special interest.
Release 06.01.01 | June 2019 | Edition 09

Preface
6
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
1.9.1 Procedures with options or substeps
When there are options in a procedure, they are identified by letters. When there are
required substeps in a procedure, they are identified by roman numerals.
Procedure 3 Example of options in a procedure
At step 1, you can choose option a or b. At step 2, you must do what the step indicates.
1This step offers two options. You must choose one of the following:
aThis is one option.
bThis is another option.
2You must perform this step.
Procedure 4 Example of required substeps in a procedure
At step 1, you must perform a series of substeps within a step. At step 2, you must do what the
step indicates.
1This step has a series of substeps that you must perform to complete the step. You must
perform the following substeps:
iThis is the first substep.
ii This is the second substep.
iii This is the third substep.
2 You must perform this step.
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide Preface
Issue: 01 3FE-46261-AAAA-TCZZA 7
1.10 Multiple PDF document search
You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a
common term. Adobe Reader displays the results in a single display panel. The
results are grouped by PDF file, and you can expand the entry for each file.
Procedure 5 To search multiple PDF files for a common term
1Open Adobe Acrobat Reader.
2Choose Edit→Search from the Acrobat Reader main menu. The Search PDF panel appears.
3Enter the search criteria.
4Click on the All PDF Documents In radio button.
5Select the folder in which to search using the drop-down menu.
6Click on the Search button.
Acrobat Reader displays the search results. You can expand the entries for each document
by clicking on the + symbol.
Note — The PDF files in which you search must be in the same
folder.
Release 06.01.01 | June 2019 | Edition 09

Preface
8
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide
Issue: 01 3FE-46261-AAAA-TCZZA 9
Table of contents
1 Preface.............................................................................................3
1.1 Scope ..........................................................................................................3
1.2 Audience......................................................................................................3
1.3 Required knowledge....................................................................................3
1.4 Acronyms and initialisms .............................................................................3
1.5 Assistance and ordering phone numbers ....................................................3
1.6 Nokia quality processes...............................................................................4
1.7 Safety information........................................................................................4
1.8 Documents ..................................................................................................4
1.9 Special information ......................................................................................5
1.9.1 Procedures with options or substeps...........................................................6
1.10 Multiple PDF document search ...................................................................7
2 ETSI environmental and CRoHS guidelines...............................17
2.1 Environmental labels .................................................................................17
2.1.1 Overview....................................................................................................17
2.1.2 Environmental related labels .....................................................................17
2.1.2.1 Products below Maximum Concentration Value (MCV) label....................17
2.1.2.2 Products containing hazardous substances above Maximum
Concentration Value (MCV) label ..............................................................18
2.2 Hazardous Substances Table (HST).........................................................19
2.3 Other environmental requirements ............................................................20
2.3.1 ONU environmental requirements .............................................................20
2.3.2 Storage ......................................................................................................20
2.3.3 Transportation ...........................................................................................20
2.3.4 Stationary use............................................................................................20
2.3.5 Thermal limitations ....................................................................................20
2.3.6 Material content compliance......................................................................21
2.3.7 End-of-life collection and treatment ...........................................................21
3 ETSI ONU safety guidelines.........................................................23
3.1 Safety instructions .....................................................................................23
3.1.1 Safety instruction boxes ............................................................................23
3.1.2 Safety-related labels..................................................................................24
3.2 Safety standards compliance ....................................................................25
3.2.1 EMC, EMI, and ESD compliance...............................................................25
3.2.2 Equipment safety standard compliance.....................................................25
3.2.3 Environmental standard compliance .........................................................26
3.2.4 Laser product standard compliance ..........................................................26
3.2.5 Resistibility requirements compliance .......................................................26
3.2.6 Acoustic noise emission standard compliance ..........................................26
3.3 Electrical safety guidelines ........................................................................26
3.3.1 Power supplies ..........................................................................................27
3.3.2 Cabling ......................................................................................................27
3.3.3 Protective earth .........................................................................................27
3.4 ESD safety guidelines ...............................................................................27
Release 06.01.01 | June 2019 | Edition 09

10
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
3.5 Laser safety guidelines..............................................................................27
3.5.1 Laser classification ....................................................................................28
3.5.1.1 Laser warning labels..................................................................................28
3.5.2 Transmit optical output ..............................................................................30
3.5.3 Normal laser operation ..............................................................................30
3.5.4 Location class............................................................................................31
3.6 Environmental requirements......................................................................31
4 ANSI ONU safety guidelines ........................................................33
4.1 Safety instructions .....................................................................................33
4.1.1 Safety instruction boxes in customer documentation ................................33
4.1.2 Safety-related labels..................................................................................34
4.2 Safety standards compliance ....................................................................35
4.2.1 EMC, EMI, and ESD standards compliance..............................................36
4.2.2 CE standard compliance ...........................................................................36
4.2.3 Equipment safety standard compliance.....................................................37
4.2.4 Laser product standards compliance.........................................................37
4.2.5 Resistibility requirements compliance .......................................................37
4.3 Laser safety guidelines..............................................................................38
4.3.1 Laser warning labels..................................................................................38
4.3.2 Laser classification ....................................................................................40
4.3.3 Transmit optical output ..............................................................................41
4.3.4 Normal laser operation ..............................................................................41
4.3.5 Location class............................................................................................41
4.4 Electrical safety guidelines ........................................................................42
4.4.1 Power supplies ..........................................................................................42
4.4.2 Cabling ......................................................................................................42
4.4.3 Protective earth .........................................................................................42
4.5 ESD safety guidelines ...............................................................................42
4.6 Environmental requirements......................................................................43
5 E-240G-B unit data sheet .............................................................45
5.1 E-240G-B part numbers and identification ................................................45
5.2 E-240G-B general description ...................................................................47
5.3 Optical parameters ....................................................................................48
5.4 Turbo mode ...............................................................................................48
5.5 E-240G-B software and installation feature support..................................49
5.6 E-240G-B interfaces and interface capacity ..............................................49
5.6.1 E-240G-B connections and components...................................................49
5.7 E-240G-B LEDs.........................................................................................50
5.8 E-240G-B detailed specifications ..............................................................52
5.9 E-240G-B functional blocks .......................................................................53
5.10 E-240G-B standards compliance...............................................................54
5.10.1 Energy-related products standby and off modes compliance....................54
5.10.2 CE standards compliance..........................................................................54
5.10.3 Laser product standards compliance.........................................................54
5.10.4 FCC compliance statement .......................................................................55
5.10.5 Responsible party......................................................................................55
5.11 E-240G-B special considerations ..............................................................55
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide
Issue: 01 3FE-46261-AAAA-TCZZA 11
6 Install an E-240G-B ONU ..............................................................57
6.1 Purpose .....................................................................................................57
6.2 General......................................................................................................57
6.3 Prerequisites..............................................................................................57
6.4 Recommended tools..................................................................................57
6.5 Safety information......................................................................................58
6.6 ONU installation procedure .......................................................................59
6.7 ONU mounting in an MNTS-A shelf...........................................................70
7 Replace an E-240G-B ONU...........................................................81
7.1 Purpose .....................................................................................................81
7.2 General......................................................................................................81
7.3 Prerequisites..............................................................................................81
7.4 Recommended tools..................................................................................81
7.5 Safety information......................................................................................82
7.6 ONU replacement procedure.....................................................................83
7.7 ONU replacement in an MNTS-A shelf......................................................89
8 Configure an E-240G-B ONU .......................................................91
8.1 General......................................................................................................91
9 Grounding safety ..........................................................................93
9.1 Grounding safety .......................................................................................94
Release 06.01.01 | June 2019 | Edition 09

12
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide
Issue: 01 3FE-46261-AAAA-TCZZA 13
List of figures
2 ETSI environmental and CRoHS guidelines...............................17
Figure 1 Products below MCV value label...............................................................18
Figure 2 Products above MCV value label ..............................................................19
Figure 3 Recycling/take back/disposal of product symbol.......................................21
3 ETSI ONU safety guidelines.........................................................23
Figure 4 PSE certification ........................................................................................25
Figure 5 Laser product label ....................................................................................28
Figure 6 Laser classification label............................................................................29
Figure 7 Laser warning labels..................................................................................30
4 ANSI ONU safety guidelines ........................................................33
Figure 8 Sample safety label on the ONU equipment .............................................35
Figure 9 Sample safety compliance label ................................................................36
Figure 10 Sample laser product label showing CDRH 21 CFR compliance..............37
Figure 11 Laser product label ....................................................................................38
Figure 12 Laser classification label............................................................................39
Figure 13 Laser warning labels..................................................................................40
Figure 14 Sample laser product safety label on the ONU equipment........................41
5 E-240G-B unit data sheet .............................................................45
Figure 15 E-240G-B ONU connections .....................................................................50
Figure 16 E-240G-B ONU LEDs................................................................................51
Figure 17 Single-residence Gigabit Ethernet ONU with POTS..................................53
Figure 18 Laser product label showing safety standard compliance .........................54
6 Install an E-240G-B ONU ..............................................................57
Figure 19 E-240G-B ONU on a desk .........................................................................59
Figure 20 Wall mounting keyholes on E-240G-B ONUs (without fiber storage
tray) ...........................................................................................................60
Figure 21 Wall mounting keyholes on the fiber storage tray......................................61
Figure 22 Mounting the cable storage compartment (3EM 20293 AA)......................63
Figure 23 Coiled cable routing (open view) ...............................................................64
Figure 24 Mounting the outdoor enclosure for the E-240G-B ONU...........................66
Figure 25 Outdoor enclosure with fiber optic cable ...................................................67
Figure 26 Faceplate and panel screws......................................................................71
Figure 27 Ground lug on the faceplate ......................................................................72
Figure 28 Ground lug on the ONU (G-240G-A shown)..............................................72
Figure 29 Faceplate tabs ...........................................................................................73
Figure 30 Lock tabs on the ONU ...............................................................................73
Figure 31 Secured ground lug on the faceplate.........................................................74
Figure 32 ONU and faceplate in MNTS-A shelf.........................................................75
Figure 33 Drill holes for wall mounting.......................................................................76
Figure 34 Wall-mounted shelf....................................................................................77
Figure 35 Rack-mounted shelf...................................................................................78
Figure 36 Cable and fiber connections ......................................................................79
Release 06.01.01 | June 2019 | Edition 09

14
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
7 Replace an E-240G-B ONU...........................................................81
Figure 37 E-240G-B ONU connections .....................................................................83
Figure 38 E-240G-B ONU mounted in an outdoor enclosure ....................................85
Figure 39 Coiled cable routing (open view) ...............................................................88
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide
Issue: 01 3FE-46261-AAAA-TCZZA 15
List of tables
3 ETSI ONU safety guidelines.........................................................23
Table 1 Safety labels ..............................................................................................24
4 ANSI ONU safety guidelines ........................................................33
Table 2 Safety labels ..............................................................................................34
5 E-240G-B unit data sheet .............................................................45
Table 3 E-240G-B part numbers and identification ................................................45
Table 4 E-240G-B power supply ............................................................................46
Table 5 E-240G-B accessories...............................................................................47
Table 6 E-240G-B ONU interfaces .........................................................................49
Table 7 E-240G-B ONU physical connections .......................................................50
Table 8 E-240G-B ONU LEDs descriptions............................................................51
Table 9 E-240G-B ONU physical specifications .....................................................52
Table 10 E-240G-B ONU power consumption specifications...................................53
Table 11 E-240G-B ONU environmental requirements ............................................53
Table 12 Responsible party contact information ......................................................55
6 Install an E-240G-B ONU ..............................................................57
Table 13 MNTS-A shelf physical specifications........................................................71
Release 06.01.01 | June 2019 | Edition 09

16
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide ETSI environmental and CRoHS guidelines
Issue: 01 3FE-46261-AAAA-TCZZA 17
2 ETSI environmental and CRoHS
guidelines
This chapter provides information about the ETSI environmental China Restriction of
Hazardous Substances (CRoHS) regulations that govern the installation and
operation of the optical line termination (OLT) and optical network unit (ONU)
systems. This chapter also includes environmental operation parameters of general
interest.
2.1 Environmental labels
This section describes the environmental instructions that are provided with the
customer documentation, equipment, and location where the equipment resides.
2.1.1 Overview
CRoHS is applicable to Electronic Information Products (EIP) manufactured or sold
and imported in the territory of the mainland of the People’s Republic of China. EIP
refers to products and their accessories manufactured by using electronic
information technology, including electronic communications products and such
subcomponents as batteries and cables.
2.1.2 Environmental related labels
Environmental labels are located on appropriate equipment. The following are
sample labels.
2.1.2.1 Products below Maximum Concentration Value
(MCV) label
Figure 1 shows the label that indicates a product is below the maximum
concentration value, as defined by standard SJ/T11363-2006 (Requirements for
Concentration Limits for Certain Hazardous Substances in Electronic Information
Products). Products with this label are recyclable. The label may be found in this
documentation or on the product.
Release 06.01.01 | June 2019 | Edition 09

ETSI environmental and CRoHS guidelines
18
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
Figure 1 Products below MCV value label
2.1.2.2 Products containing hazardous substances above
Maximum Concentration Value (MCV) label
Figure 2 shows the label that indicates a product is above the maximum
concentration value, as defined by standard SJ/T11363-2006 (Requirements for
Concentration Limits for Certain Hazardous Substances in Electronic Information
Products). The number contained inside the label indicates the Environment-Friendly
User Period (EFUP) value. The label may be found in this documentation or on the
product.
18986
Release 06.01.01 | June 2019 | Edition 09

7368 ISAM ONT E-240G-B Product Guide ETSI environmental and CRoHS guidelines
Issue: 01 3FE-46261-AAAA-TCZZA 19
Figure 2 Products above MCV value label
Together with major international telecommunications equipment companies, Nokia
has determined it is appropriate to use an EFUP of 50 years for network
infrastructure equipment and an EFUP of 20 years for handsets and accessories.
These values are based on manufacturers' extensive practical experience of the
design, manufacturing, maintenance, usage conditions, operating environments,
and physical condition of infrastructure and handsets after years of service. The
values reflect minimum values and refer to products operated according to the
intended use conditions. See “Hazardous Substances Table (HST)” for more
information.
2.2 Hazardous Substances Table (HST)
This section describes the compliance of the OLT and ONU equipment to the CRoHS
standard when the product and sub-assemblies contain hazardous substances
beyond the MCV value. This information is found in this user documentation where
part numbers for the product and sub-assemblies are listed. It may be referenced in
other OLT and ONU documentation.
In accordance with the People’s Republic of China Electronic Industry Standard
Marking for the Control of Pollution Caused by Electronic Information Products
(SJ/T11364-2006), customers may access the Nokia Hazardous Substance Table,
in Chinese, from the following location:
•http://www.alcatel-sbell.com.cn/wwwroot/images/upload/private/1/media/ChinaRo
HS.pdf
If clicking the link does not work, copy the link and paste it into your browser.
18985
Release 06.01.01 | June 2019 | Edition 09

ETSI environmental and CRoHS guidelines
20
7368 ISAM ONT E-240G-B Product Guide
3FE-46261-AAAA-TCZZA Issue: 01
2.3 Other environmental requirements
Observe the following environmental requirements when handling the P-OLT or
ONU equipment.
2.3.1 ONU environmental requirements
See the ONU technical specification documentation for more information about
temperature ranges.
2.3.2 Storage
According to ETS 300-019-1-1 - Class 1.1, storage of OLT equipment must be in
Class 1.1, weather-protected, temperature-controlled locations.
2.3.3 Transportation
According to EN 300-019-1-2 - Class 2.3, transportation of the OLT equipment must
be in packed, public transportation with no rain on packing allowed.
2.3.4 Stationary use
According to EN 300-019-1-3 - Class 3.1/3.2/3.1E, stationary use of OLT equipment
must be in a temperature-controlled location, with no rain allowed, and with no
condensation allowed.
2.3.5 Thermal limitations
When the OLT is installed in the CO or CEV, install air filters on the P-OLT. The
thermal limitations for OLT operation in a CO or CEV are:
•operating temperature: 5°C to 40°C (41°F to 104°F)
•short-term temperature: –5°C to 50°C (23°F to 122°F)
•operating relative humidity: 5% to 85%
•short-term relative humidity: 5% to 95%, but not to exceed 0.024 kg of water/kg
Release 06.01.01 | June 2019 | Edition 09