Nordpeis Q-23FL - Powerstone User manual

Q-23FL
Product no: 22-Q23FL-000
RRF no: 29 13 3453
Last updated: 02.10.2017
NO Brukerveiledning 2
SE Bruksanvisning 10
GB User manual 17
DE Montageanleitung 24
FR Manuel d’installation 35
FI Käyttöohje 44

17
GB
3ULRUWRDVVHPEOLQJWKHLQVHUW 
Chimney Draught 17
6KDUHGÀXHJDVV\VWHP 
Air Supply 18
2. Technical Information 18
3. Distance to combustible material 19
$VVHPEO\ 
Removing the insert from the pallet 19
Operational control 19
Pulley radiation shield 19
Self closing door 19
Cleaning the glass 19
Radiation shields 19
Powerstone (accessory) 20
Flue collar and connection 20
Painting the surround 20
/LJKWLQJWKH¿UHIRUWKH¿UVWWLPH 
6. Maintenance 20
Cleaning and inspection 20
Ashes 20
Thermotte™ 21
Door and glass 21
:DUUDQW\ 
$GYLFHRQOLJKWLQJD¿UH 
6RPHDGYLFHLQFDVHRIFRPEXVWLRQSUREOHPV 
INDEX
3ULRUWRDVVHPEOLQJWKHLQVHUW
All our products are tested according to the latest
European requirements and also WRWKH1RUZHJLDQ
standard NS 3058 and NS 3059, which include particle
tests. However, several European countries have local
UHJXODWLRQVIRULQVWDOODWLRQRI¿UHSODFHVZKLFKFKDQJH
regularly. It is the responsibility of the client that these
regulations are complied with in the country/region
ZKHUHWKH¿UHSODFHLVLQVWDOOHG1RUGSHLV$6LVQRW
responsible for incorrect installation.
Important to check
(please note that this list is not exhaustive):
• GLVWDQFHIURP¿UHER[WRFRPEXVWLEOHÀDPPDEOH
materials
• insulation materials/requirements between
¿UHSODFHVXUURXQGDQGEDFNZDOO
• VL]HRIÀRRUSODWHVLQIURQWRI¿UHSODFHLIUHTXLUHG
• ÀXHFRQQHFWLRQEHWZHHQ¿UHER[DQGFKLPQH\
• LQVXODWLRQUHTXLUHPHQWVLIÀXHSDVVHVWKURXJKD
ÀDPPDEOHZDOO
&KLPQH\GUDXJKW
Compared with older models, the clean burning inserts
RIWRGD\SXWVLJQL¿FDQWO\KLJKHUGHPDQGVRQWKH
chimney. Even the best insert will not work properly
,03257$176$)(7<35(&$87,216
1. Please follow the installation manual when
FRQQHFWLQJ\RXUVWRYH¿UHSODFHWRWKHFKLPQH\
ÀXHSLSH,IFRQQHFWHGGLႇHUHQWO\IURPLQVWUXFWLRQ
SOHDVHFRQVLGHUWKHKHDWUDGLDWLRQIURPWKHÀXH
pipe to the surrounding materials.
2. Before use, please carefully read the user manual
and follow the instructions.
,QWHJUDWHGRUGH¿QHGFRQYHFWLRQRSHQLQJVPD\
never be reduced or partially obstructed. This may
lead to overheating, which again can cause house
¿UHRUVHULRXVGDPDJHWRWKHSURGXFW
8VHRQO\GHVLJQDWHG¿UHVWDUWHUV1HYHUXVH
JDVROLQHGLHVHORURWKHUOLTXLGVWRVWDUWWKH¿UH
7KLVPD\FDXVHH[SORVLRQV
5. Never use other fuel than natural dry chopped
wood. Briquettes, peat, coke, coal and waste
from construction materials develops far higher
temperatures and emissions than natural wood.
Since your product has been designed for use
with natural wood only, other fuels may damage
the product, chimney and surrounding
constructions.
6. In case of damage to glass or door gasket, all use
of the product must be discontinued until the
damage has been repaired.
)DLOXUHWRIROORZWKHVHSUHFDXWLRQVZLOOOHDYH\RXU
ZDUUDQW\YRLGDQGH[SRVHSHRSOHDQGSURSHUW\WR
GDQJHU
$GYLVHEven if not required in your area, it is always
ZLVHWRKDYHDTXDOL¿HGVWRYH¿UHSODFH¿WWHUGRWKH
LQVWDOODWLRQRUDWOHDVWWKH¿QDOLQVSHFWLRQEHIRUHXVH

18 GB
2. Technical information
Inserts from Nordpeis all have secondary combustion
and are clean burning. The combustion takes place
LQWZRSKDVHV¿UVWWKHZRRGEXUQVDQGWKHQWKH
gases from the fumes are lit by the heated air. This
ensures that new inserts have minimal emissions of
soot particles and un-burnt gases (such as CO) and
are thus better for the environment. Clean burning
inserts require a small amount of wood to obtain good
heat output. Use exclusively clean and dry wood. We
recommend seasoned hardwood with a maximum
moisture content of 20%.
Insert Q-23FL
Material Steel
Surface treatment Heat resistant varnish
:HLJKWRILQVHUWNJ 136
'UDXJKWV\VWHP Ignition & air vent control
&RPEXVWLRQV\VWHP Clean burning
&RPEXVWLRQDLU
FRQVXPSWLRQPñK
20 - 30
0D[LPXPIXHOOHQJWKFP 50
Flue outlet Top
)OXHFROODUPP Outer 150
*alternate versions exist due to national requirements
)OXHJDVWHPSHUDWXUHDWÀXH
FRQQHFWRU& 283 °C
)OXHJDVPDVÀRZ>JV@ 5,6
'UDIWDWÀXHFRQQHFWRU
UHFRPPHQGHG3D 12 - 25
'DWDDFFRUGLQJWR(1
$UHDRIFRQYHFWLRQDLUYHQW
XQGHULQVHUWFP2
600 cm²
$UHDRIFRQYHFWLRQDLUYHQW
RYHULQVHUWFP2
600 cm²
0LQLPXPGLVWDQFHFRQYDLU
RXWOHWWRFHLOLQJPP
550
1RPLQDOKHDWRXWSXWN: 6 kW
(ႈFLHQF\ 81 %
&2#22 0,07 %
)OXHJDVWHPSHUDWXUH& 248 °C
'UDIW3D 12 Pa
Fuel recommended: Wood
)XHOOHQJWKUHFRPHQGHG
FP
33
)XHOFKDUJHNJ 1,29
5HIXHOLQJLQWHUYDO
PLQXWHV
45
2SHQLQJRIWKHDLUYHQW
FRQWURO
35
Operation Intermitterende*
,QWHUPLWWHQWFRPEXVWLRQUHIHUVWRQRUPDOXVHRID¿UHSODFHLHQHZ
wood is inserted when the previous load has burned down to ember
if the chimney does not have the right dimensions or
is not in good working order. The draught is mainly
controlled by gas temperature, outside temperature, air
supply as well as the height and inner diameter of the
chimney. The diameter of the chimney should never
EHOHVVWKDQWKDWRIWKHÀXHFKLPQH\FROODU)RUGUDIW
requirements at nominal heat output, see technical
table
The draught increases when:
• The chimney becomes warmer than the outside air
• The active length of the chimney over the hearth
increases
• Good air supply to the combustion
,WFDQEHGLႈFXOWWRREWDLQWKHULJKWGUDXJKWFRQGLWLRQV
in case the chimney is too large relative to the insert,
as the chimney does not heat up well enough. In such
cases you should contact professional for evaluation
of possible measures. Draught that is too strong can
be controlled with a damper. If necessary, contact a
chimney sweeper.
6KDUHGÀXHJDVV\WHP
$SSOLDQFHFDQEHFRQQHFWHGWRVKDUHGÀXHJDVSLSH
sytem.
$LUVXSSO\
A set for fresh air supply is available as an accessory.
This will ensure that the air supply to the combustion
FKDPEHULVOHVVDႇHFWHGE\YHQWLODWLRQV\VWHPVNLWFKHQ
fans and other factors which can create a down-draught
in the room. In all new constructions, we strongly
recommend the product is designed and prepared
for direct supply of outside air. In older houses also,
the use of fresh air supply set is also recommended.
,QVXႈFLHQWDLUVXSSO\FDQFDXVHSRRUGUDXJKWDQG
WKHUHE\ORZFRPEXVWLRQHႈFLHQF\DQGWKHSUREOHPVWKLV
HQWDLOVVRRWVWDLQVRQWKHJODVVLQHႈFLHQWXWLOLVDWLRQRI
the wood and a soot deposits in the chimney.
soot deposits in the chimney.
For your own safety, fully comply with the assembly
instructions. All safety distances are minimum distances.
Installation of the insert must comply with the current rules
and regulations of the country where the product is installed.
Nordpeis AS is not responsible for wrongly assembled
inserts.
Subject to errors and changes.
For the latest updated version go to www.nordpeis.com.
:DUQLQJ,QFDVHRIWKHDSSOLDQFHFRQQHFWHGWR
VKDUHGÀXHJDVSLSHV\VWHPWKH6HOI&ORVLQJ
'RRUV\VWHPPXVWEHRSHUDWLRQDO6HH3DUD-
JUDSK$VVHPEO\6HOI&ORVLQJ'RRU
:DUQLQJ .HHSWKHDLULQWDNHVVXSSO\LQJ
FRPEXVWLRQDLUIUHHIURPEORFNDJH
:DUUQLQJ([WUDFWRUIDQVZKHQRSHUDWLQJ
in the same room or space as the appliance
PD\FDXVHSUREOHP

19
GB
:DUQLQJ,IWKHUHTXLUHPHQWVIRUYHQWLODWLRQDUH
127FRPSOLHGZLWKWKHFRROLQJDLUÀRZDURXQG
WKHSURGXFWZLOOEHFRQVLGHUDEO\UHGXFHGDQG
WKHSURGXFWFDQRYHUKHDW
7KLVFDQFDXVHD¿UH
3. Distance to combustible material
Firewall
(QVXUHWKDWWKHVDIHW\GLVWDQFHVDUHIXO¿OOHG
(FIG 1).
When connecting a steel chimney to the top outlet use
the security distances required by the manufacturer.
,PSRUWDQW:KHQSODFLQJWKHLQVHUWRQD
FRPEXVWLEOHÀRRUDVWHHOSODWHRIDWOHDVWPP
PXVWFRYHUWKHHQWLUHÀRRUVXUIDFHLQVLGHWKH
VXUURXQG$Q\ÀRRULQJPDGHRIFRPEXVWLEOH
material, such as linoleum, carpets etc. must be
UHPRYHGIURPXQGHUQHDWKWKHVWHHOSODWH
The insert expands when in use, and for this
reason the surround must NEVER rest on the
LQVHUWEXWKDYHDJDSRIDERXWPP7KH
insert must neither rest on the bench plate
RUDJDLQVWWKHVLGHV,WLVUHFRPPHQGHGWR
GU\VWDFNWKHVXUURXQGLQRUGHUWRDGMXVWWKH
LQVHUWSULRUWRSHUIRUDWLQJWKHFKLPQH\IRUWKH
ÀXHFRQQHFWLRQ
$VVHPEO\
Before the insert is removed from the pallet, remove the
accessories in the combustion chamber. To acess the
combustion chamber, do as follows:
1. Loosen the transport safety from the counterweight
and loosen the screw fastening the transport safety to
the product. Push the transport safety away from the
counterweight FIG 3A.
2. Make sure both wires are in place before opening the
door FIG 3B
3. Remove alle loose accessories from the combustion
chamber. Use the list of contents to make sure all parts
are included. Before lifting the product of the pallet,
secure the counterweight with the transport safety.
4. The insert is placed on two rails on top of the pallet.
In order to remove it from the rails and pallet, loosen
the screws and remove the brackets holding it in place.
Before lifting the insert of the pallet, fasten the screws
removed from the legs FIG 2.
Operational control
When the insert is in an upright position, and prior to
PRXQWLQJWKHVXUURXQG, check that all
functions are easy to use and appear satisfactory.
1. Adjust the legs. Make sure the insert is level.
2. Loosen the transport safety. Make sure the
wires holding the door are in place.
3. Make sure the door can be opened and closed
properly.
$WWHQWLRQ7KHSXOOH\VRQHDFKVLGHRIWKHGRRUDUH
FRDWHGZLWKVSHFLDOKHDWUHVLVWDQWJUHDVH,IDQHZ
JUHDVHLVQHHGHGFRQWDFWRQHRIRXUGHDOHUVWR
PDNHVXUHWKHULJKWW\SHRIJUHDVHLVXVHG
3XOOH\UDGLDWLRQVKLHOG),*
If the insert is connected to the smokepipe
sideways, attach the small radiation shield around the
pulley closest to the smokepipe.
,JLWLRQ$LUYHQWFRQWURO
AB
$LUYHQWFRQWURO ,JQLWLRQSRVLWLRQ
QHGHWLOK¡\UH
Left position = closed
Right position = open Fully to the right
6HOIFORVLQJGRRU
To make the door self closing, do as follows;
8VHDÀDWVFUHZGULYHUWRPRYHWKHWKUHHFODPSV
holding the weights in place outwards FIG 4(A)
5HPRYHWKHZHLJKW¿WWHWZLWKDKDQGOH),*%
3. Carefully push the clamps back in place.
&OHDQLQJWKHJODVV),*$%
If it becomes necessary to clean the glass, pull out the
two small handles above the door to keep it in place
FIG 5A. Pull out the lock handle on the left side of the
GRRUDQGRSHQWKHGRRU$IWHUFOHDQLQJWKHJODVV¿UVW
lock the handle on the left side of the door before
pushing the two small handles back in place.
&DXWLRQ%HFDUHIXOZKHQRSHQLQJWKHGRRU
VLGHZD\V6RPHVXUURXQGVKDYHPDUEOHZD[HG
FRQFUHWHSDUWVDQGJUDWHVTXLWHFORVHWRWKHGRRU
DQGERWKWKHGRRUDQGVXUURXQGLQJSDUWVPD\
VXVWDLQGDPDJHLIFDUHOHVVO\RSHUDWHG
Radiation shields, rear and around smoke collar.
7KHLQVHUWLV¿WWHGZLWKDUHDUUDGLDWLRQVKLHOGDQGD
separate shield around the smoke collar(FIG 6-7). To
utilize the rear or side connection, remove the cut in
the radiation shield. To keep the smoke collar radia-
tion shield in place, push the upper and lower cuts in
towards the smokepipe

20 GB
When there is a glowing layer of ash, new wood logs
can be inserted. Pull the hot ember to the front of the
combustion chamber when inserting new logs so that
WKHZRRGLVLJQLWHGIURPWKHIURQW7KH¿UHVKRXOGEXUQ
ZLWKEULJKWDQGOLYHO\ÀDPHV
Reload size
Chopped wood (diametre of 6-9cm)
Length: 25-50cm
Normal load size. 1,86 kg /h
0D[ORDGVL]HNJK
8VLQJWKHLQVHUWZLWKORZFRPEXVWLRQHႇHFWDQG¿ULQJ
around the clock increase pollution as well as the risk
IRUD¿UHLQWKHFKLPQH\1HYHUDOORZWKHLQVHUWRUÀXH
WREHFRPHJORZLQJUHG7XUQRႇWKHDLUYHQWFRQWURO
should this happen. Regulation of the air vent control
takes some experience, but after a little while a natural
UK\WKPIRUWKH¿UHZLOOEHIRXQG
:$51,1*
1HYHUOHDYHWKHDLUFRQWUROLQLJQLWLRQPRGHIRUSUR-
ORQJHGSHULRGVDVWKLVPD\OHDGWRRYHUKHDWLQJ
,03257$17$OZD\VUHPHPEHUWRRSHQWKHDLU
YHQWFRQWUROEHIRUHQHZZRRGORJVDUHLQVHUWHG
LQWRDKRWEXUQFKDPEHU/HWWKHÀDPHVJHWD
JRRGJULSRQWKHZRRGEHIRUHWKHDLUFRQWURO
VHWWLQJLVUHGXFHG
:KHQWKHGUDXJKWLQWKHFKLPQH\LVORZDQG
WKHYHQWLVFORVHGWKHJDVIURPWKH¿UHZRRG
FDQEHLJQLWHGZLWKDEDQJ7KLVFDQFDXVH
GDPDJHWRWKHSURGXFWDVZHOODVWKHLPPHGLDWH
HQYLURQPHQW
6. Maintenance
&OHDQLQJDQGLQVSHFWLRQ
The insert should be inspected thoroughly and cleaned
at least once per season (possibly in combination
with the sweeping of the chimney and chimney pipes).
Ensure that all joints are tight and that the gaskets are
rightly positioned. Exchange any gaskets that are worn
or deformed.
Remember that the insert must always be cold when
inspected.
Ashes
The ashes should be removed at regular intervals.
Be aware that the ashes can contain hot ember even
VHYHUDOGD\VDIWHUWKH¿UHLV¿QLVKHG8VHDFRQWDLQHU
of non-combustible material to remove the ashes. It is
recommended to leave a layer of ashes in the bottom
as this further insulates the burn chamber. Take care
with the Thermotte plates when the ashes are removed,
particularly when using an ash shovel, so as not to
damage them.
7KHUPRWWHDVVHPEO\),*
Open the door (follow the instructions on how to clean
the glass). Place the Thermotte as show in the
illustrations.
3RZHUVWRQHDVVHPEO\
Powerstone is an accessory. For assebling see a
separate instruction.
Flue collar and connection
$WWHQWLRQ2XULQVHUWVDUHSUHSDUHGIRU
FRQQHFWLQJWKHVPRNHSLSHRQWKHRXWVLGHRIWKH
ÀXHFROODU7KHFROODUFDQEHDGMXVWHGRU
turned around FIG 4B.
$OWHUQDWLYHYHUVLRQVRIWKHÀXHFROODUH[VLVWGXHWR
National requirements. For the connection to the
chimney, follow the recommendations from the chimney
manufacturer
3DLQWLQJWKHVXUURXQG
It is recommended to use the insert a few times in order
to let the varnish harden before any eventual masking
and painting. Only use water based breathing paint and
a designated masking tape. Carefully remove the tape
in order not to damage the varnish.
/LJKWLQJWKH¿UHIRUWKH¿UVWWLPH
When the insert is installed and all instructions have
EHHQREVHUYHGD¿UHFDQEHOLW
Take care when inserting logs into the burn chamber,
in order not to damage the Thermotte plates. Please
note that there might be some humidity in the insulation
SODWHVZKLFKFDQUHVXOWLQDVORZHUEXUQUDWHWKH¿UVW
few times the insert is used. This will be resolved once
the humidity has evaporated. If needed leave the door
VOLJKWO\RSHQWKH¿UVWWLPHVWKHLQVHUWLVXVHG
,WLVDGYLVDEOHWRYHQWLODWHWKHURRPZHOOZKHQXVLQJ
IRUWKH¿UVWWLPHDVWKHYDUQLVKRQWKHSURGXFWPD\
release some smoke or smell. Both the smoke and
smell will disappear and are not hazardous.
&ORVHWKHLQVHUWGRRUGXULQJXVDJH
6HHVHSDUDWHXVDJHDQGPDLQWHQDQFHPDQXDO
:DUQLQJ
In order to avoid injuries, please be aware that the
surfaface may become hot during operation and that
extra care need to be taken to avoid skin burn.
/LJKWLQJD¿UH
Kindling wood
Finely chopped (diameter of 3-5cm)
Length: 25-30cm
Ca. amount pr lighting : 2 kg
Place the air vent control in ignition mode (B). Insert
VPDOOGU\SLHFHVRIZRRGLJQLWHDQGHQVXUHWKHÀDPHV
KDYHWDNHQSURSHUKROGRIWKHZRRG:KHQWKHÀDPHV
are stable and the chimney is warm, pull the air control
RXWRIWKHLJQLWLRQPRGHDQGUHJXODWHWKH¿UHQRUPDOO\

21
GB
7KHUPRWWH
The insulation plates (Thermotte - FIG 9) are classi-
¿HGDV³ZHDUDQGWHDU´SDUWVZKLFKZLOOUHTXLUHWREH
exchanged after some years. The wear time will depend
on the individual use of your product.
1RUGSHLVRႇHUVDRQH\HDUZDUUDQW\RQWKHVHSDUWV
After this, replacements can be purchased.
If new plates are needed, contact your dealer.
$6PRNHEDႉH
B. Back plate
C. Front plate
D. Plate under ashbox
E. Side plate left
F. Side plate right
G. Bottom plate left
H. Bottom plate right
Please note: Wood logs that are too long can cause
additional strain and crack the plates, due to the tension
created between the side plates.
Door and Glass
Should there be any soot on the glass it may be
necessary to clean it. Use dedicated glass cleaner,
as other detergents may damage the glass. (NB! Be
careful, even dedicated glass cleaner can damage the
varnish on the door frame and the gaskets). A good
advice for cleaning the glass is to use a damp cloth or
kitchen roll paper and apply some ash from the burn
FKDPEHU5XEDURXQGWKHDVKRQWKHJODVVDQG¿QLVKRႇ
with a piece of clean and damp kitchen roll paper.
NB! Only clean when the glass is cold.
Check regularly that the transition between the glass
and the door is completely tight.
Periodically, it may be necessary to change the gaskets
on the door to ensure that the burn chamber is air tight
and working optimally. These gaskets can be bought as
a set, usually including ceramic glue.
Ceramic glass should
be disposed of as resid-
ual waste, together with
pottery and porcelain
CERAMIC GLASS
CANNOT BE
RECYCLED
5HF\FOLQJRIWKHFHUDPLFJODVV
Ceramic glass cannot be recycled. Old glass, breakage
or otherwise unusable ceramic glass must be discarded
as residual waste. Ceramic glass has a higher melting
temperature, and can therefore not be recycled together
with glass. If mixed with ordinary glass, it would damage
the raw material and could, in worst case end the
recycling of glass. It is an important contribution to the
environment to ensure that ceramic glass does not end
up with the recycling of ordinary glass.
3DFNDJLQJ5HF\FOH
The packaging accompanying the product should be
recycled according to national regulations.
:DUUDQW\
)RUGHWDLOHGGHVFULSWLRQRIWKHZDUUDQW\FRQGLWLRQV
VHHWKHHQFORVHGZDUUDQW\FDUGRUYLVLWRXUZHEVLWH
www.nordpeis.com
The &(PDUN is placed on the side of the insert.
$GYLFHRQOLJKWLQJD¿UH
7KHEHVWZD\WROLJKWD¿UHLVZLWKWKHXVHRIOLJKWHQLQJ
briquettes and dry kindling wood. Newspapers cause a
lot of ash and the ink is damaging for the environment.
$GYHUWLVLQJÀ\HUVPDJD]LQHVPLONFDUWRQVDQGVLPLODU
DUHQRWVXLWDEOHIRUOLJKWLQJD¿UH*RRGDLUVXSSO\LV
LPSRUWDQWDWLJQLWLRQ:KHQWKHÀXHLVKRWWKHGUDXJKW
increases and door can be closed.
:DUQLQJ1(9(5XVHDOLJKWLQJIXHOVXFKDV
SHWURONHURVHQHDOFRKRORUVLPLODUIRUOLJKWLQJ
D¿UH7KLVFRXOGFDXVHLQMXU\WR\RXDVZHOODV
GDPDJLQJWKHSURGXFW
:DUQLQJ
,QRUGHUWRDYRLGLQMXULHVSOHDVHEHDZDUHWKDWWKH
VXUIDIDFHPD\EHFRPHKRWGXULQJRSHUDWLRQDQG
WKDWH[WUDFDUHQHHGWREHWDNHQWRDYRLGVNLQEXUQ
Use clean and dry wood with a maximum moisture
content of 20%. The wood should be dried for a
minimum of 6 months after it is cut. Humid wood
requires a lot of air for the combustion, as extra energy/
heat is required for drying the humid wood and the heat
HႇHFWLVWKHUHIRUHPLQLPDO7KLVLQDGGLWLRQFUHDWHVVRRW
in the chimney with the risk of creosote and chimney
¿UH
:DUQLQJ
8VHUHSODFHPHQWSDUWVUHFRPPHQGHGRQO\E\WKH
Manufacturer.
:DUQLQJ
$Q\XQDXWKRUL]HGPRGL¿FDWLRQRIWKHDSSOLDQFH
without written permission of the Manufacturer
are prohibited.

22 GB
$WWHQWLRQ
:HGRQRWUHFRPPHQGXVLQJIXHOEULTXHWWHV
FRPSDFWZRRGLQRXUSURGXFWV8VHRIVXFKIXHO
PD\FDXVHWKHSURGXFWWRRYHUKHDWDQGH[FHHG
the temperatures determined safe.
%XUQLQJEULTXHWWHVFRPSDFWZRRGLVGRQHVRDW
\RXURZQULVNDQGRQO\VPDOODPRXQWVPD[RI
QRUPDOORDGVKRXOGEHXVHGIRUHDFKORDG
:DUQLQJ
0DNHVXUHWKHLQVHUWLVQRWRYHUKHDWHGLWFDQ
FDXVHLUUHSDUDEOHGDPDJHWRWKHSURGXFW6XFK
GDPDJHLVQRWFRYHUHGE\WKHZDUUDQW\
6RXUFH³+nQGERNHႇHNWLYRJPLOM¡YHQQOLJYHGI\ULQJ´E\(GYDUG
Karlsvik SINTEF Energy Research AS and Heikki Oravainen, VTT.
:DUQLQJ
1(9(5XVHLPSUHJQDWHGZRRGSDLQWHGZRRG
SO\ZRRGFKLSERDUGUXEELVKPLONFDUWRQVSULQWHG
PDWHULDORUVLPLODU,IDQ\RIWKHVHLWHPVDUHXVHGDV
IXHOWKHZDUUDQW\LVLQYDOLG
&RPPRQWRWKHVHPDWHULDOVLVWKDWGXULQJ
FRPEXVWLRQWKH\FDQIRUPK\GURFKORULFDFLGDQG
KHDY\PHWDOVWKDWDUHKDUPIXOWRWKHHQYLURQPHQW
\RXUVHOIDQGWKHLQVHUW+\GURFKORULFDFLGFDQDOVR
FRUURGHWKHVWHHOLQWKHFKLPQH\RUPDVRQU\LQ
DPDVRQU\FKLPQH\$OVRDYRLGEXUQLQJZLWKEDUN
VDZGXVWRURWKHUH[WUHPHO\¿QHZRRGDSDUWIURP
ZKHQOLJKWLQJD¿UH7KLVIRUPRIIXHOFDQHDVLO\
FDXVHDÀDVKRYHUWKDWFDQOHDGWRWHPSHUDWXUHV
WKDWDUHWRRKLJK
6WRULQJRIZRRG
In order to ensure that the wood is dry, the tree should
be cut in winter and stored during the summer, covered
and in a location with adequate ventilation. The wood
pile must never be covered by a tarpaulin lying on the
ground as the tarpaulin will then act as a sealed lid that
will prevent the wood from drying. Always keep a small
amount of wood indoors for a few days before use so
that moisture in the surface of the wood can evaporate.
8VDJH
Not enough air to the combustion may cause the glass
WRVRRW+HQFHVXSSO\WKH¿UHZLWKDLUMXVWDIWHUWKH
ZRRGLVDGGHGVRWKDWWKHÀDPHVDQGJDVHVLQWKH
combustion chamber are properly burnt. Open the air
vent and have the door slightly ajar in order for the
ÀDPHVWRHVWDEOLVKSURSHUO\RQWKHZRRG
:DUQLQJ
Allways secure enough combustion air during
RSHUDWLRQ,IWKHDSSOLDQFHLV¿WWHGZLWKH[WHUQDODLUNLW
this is taken care of. If not, room vents or a window
should be kept open / ajar.
Note that the air supply for the combustion also can
EHWRRODUJHDQGFDXVHDQXQFRQWUROODEOH¿UHWKDWYHU\
quickly heats up the whole combustion chamber to an
extremely high temperature (when using with a closed
or nearly closed door). For this reason you should never
¿OOWKHFRPEXVWLRQFKDPEHUFRPSOHWHO\ZLWKZRRG
,WLVUHFRPPHQGHGWRNHHSDQHYHQ¿UHZLWKDVPDOO
amount of wood. Too many logs put on hot ember, may
result in combustion air starvation, and the gases will
be released unburnt. For this reason it is important to
increase the air supply just after adding logs.
&KRLFHRIIXHO
All types of wood, such as birch, beech, oak, elm, ash
and fruit trees, can be used as fuel in the insert. Wood
VSHFLHVKDYHGLႇHUHQWGHJUHHVRIGHQVLW\WKHPRUH
dense the wood is, the higher the energy value. Beech,
oak and birch has the highest density.
$WWHQWLRQ:HGRQRWUHFRPPHQGXVLQJIXHO
EULTXHWWHVFRPSDFWZRRGLQRXUSURGXFWV8VHRI
VXFKIXHOPD\FDXVHWKHSURGXFWWRRYHUKHDWDQG
exceed the temperatures determined safe.
%XUQLQJEULTXHWWHVFRPSDFWZRRGLVGRQHVRDW
\RXURZQULVNDQGRQO\VPDOODPRXQWVPD[RI
QRUPDOORDGVKRXOGEHXVHGIRUHDFKORDG
,QFDVHRIDFKLPQH\¿UHFORVHWKHGRRUDQGDLU
VXSSOLHVRQWKHVWRYHLQVHUWDQGFDOOWKH)LUH
%ULJDGH$IWHUDFKLPQH\¿UHWKHFKLPQH\PXVWLQ
DOOFDVHVEHLQVSHFWHGE\DQDXWKRUL]HGFKLPQH\
VZHHSHUEHIRUH\RXXVHWKHDSSOLDQFHDJDLQ
:DUQLQJ
7KH)LUHER[VKDOOWREHDOZD\VFORVHGH[FHSW
GXULQJLJQLWLRQUHIXHOLQJDQGDVKUHPRYDO

23
GB
6RPHDGYLFHLQFDse of combustion problems
Error Explanation Solution
1RGUDXJKW
The chimney is blocked. Contact a chimney sweeper / dealer for more information or clean the
ÀXHVPRNHEDႉHDQGEXUQFKDPEHU
7KHÀXHLVVRRW\RUWKHUHLVDFFXPXODWHGVRRWRQWKH
VPRNHEDႉH
7KHVPRNHEDႉHLVZURQJO\SRVLWLRQHG 9HULI\WKHDVVHPEO\RIWKHVPRNHEDႉHVHHDVVHPEO\LQVWUXFWLRQV
The insert
release smoke
ZKHQOLJKWLQJ
WKH¿UHDQG
GXULQJFRPEXV-
tion
Downdraught in the room caused by no draught, that the
house is too “air tight”.
/LJKWWKH¿UHZLWKDQRSHQZLQGRZ,IWKLVKHOSVPRUHELJJHUYHQWVPXVW
be installed in the room.
Downdraught in the room – caused by extractor and/or
central ventilation system that pulls too much air out of
the room.
7XUQRႇUHJXODWHH[WUDFWRUDQGRURWKHUYHQWLODWLRQ,IWKLVKHOSVPRUH
vents must be installed.
7KHÀXHVIURPWZR¿UHSODFHVVWRYHVDUHFRQQHFWHGWR
the same chimney at the same height.
2QHÀXHPXVWEHUHSRVLWLRQHG7KHKHLJKWGLႇHUHQFHRIWKHWZRÀXH
pipes must be of at least 30 cm.
7KHÀXHLVLQDGHFOLQLQJSRVLWLRQIURPWKHVPRNHGRPH
to the chimney.
7KHÀXHPXVWEHPRYHGVRWKDWWKHUHLVDQLQFOLQDWLRQRIDWOHDVW
from smoke dome to chimney. Possibly install a smoke suction device*.
7KHÀXHLVWRRIDULQWRWKHFKLPQH\
7KHÀXHPXVWEHUHFRQQHFWHGVRWKDWLWGRHVQRWHQWHULQWRWKHFKLPQH\
but ends 5 mm before the chimney inner wall. Possibly install a smoke
suction device*.
Soot hatch in the basement or attic that is open and thus
creating a false draught.
Soot hatches must always be closed. Hatches that are not tight or are
defected must be changed.
'DPSHUWRSGUDXJKWYHQWVRUGRRUVRQ¿UHSODFHVWKDWDUH
not in use are open and create a false draught.
&ORVHGDPSHUGRRUVDQGWRSGUDXJKWYHQWVRQ¿UHSODFHVWKDWDUHQRWLQ
use.
$QRSHQKROHLQWKHFKLPQH\DIWHUWKDWD¿UHSODFHKDV
been removed, thus creating a false draught. +ROHVPXVWEHFRPSOHWHO\VHDOHGRႇZLWKPDVRQU\
Defect masonry in the chimney, e.g. it is not airtight
DURXQGWKHÀXHSLSHHQWU\DQGRUEURNHQSDUWLWLRQLQVLGH
the chimney creating a false draught.
Seal and plaster all cracks and sites that are not tight.
The cross-section in the chimney is too large which
results in no or very low draught. 7KHFKLPQH\PXVWEHUH¿WWHGSRVVLEO\LQVWDOODVPRNHVXFWLRQGHYLFH
The cross-section in the chimney is too small and the
chimney cannot carry out all the smoke.
&KDQJHWRDVPDOOHU¿UHSODFHRUEXLOGQHZFKLPQH\ZLWKDODUJHUFURVV
section. Possibly install a smoke suction device*.
The chimney is too low and hence a poor draught. Increase the height of the chimney and/or install a chimney cap/smoke
suction device*.
7KH¿UHSODFH
releases smoke
inside when
LWLVZLQG\
outside.
The chimney is too low in relationship to the surrounding
terrain, buildings, trees etc.
Increase the height of the chimney and/or install a chimney cap/smoke
suction device*.
Turbulence around the chimney due to the roof being
WRRÀDW
Increase the height of the chimney and/or install a chimney cap/smoke
suction device*.
7KH¿UHSODFH
does not heat
VXႈFLHQWO\
7KH¿UHSODFHFRPEXVWLRQUHFHLYHVWRRPXFKR[\JHQGXH
to a leakage under the lower border of the insert or too
VWURQJFKLPQH\GUDXJKW'LႈFXOWWRUHJXODWHWKHFRPEXV-
tion and the wood burn up too quickly.
$Q\SRVVLEOHOHDNDJHPXVWEHVHDOHGRႇ$GUDXJKWUHJXODWRURUSRVVLEO\
a damper can reduce the chimney draught. NB! A leakage of only 5 cm2
is enough for 30% of the heated air to disappear.
Too much
GUDXJKW
7KHVPRNHEXႇHULVZURQJO\SRVLWLRQHG 9HULI\WKHSRVLWLRQLQJRIWKHVPRNHEXႇHU±VHHDVVHPEO\LQVWUXFWLRQV
In case of using oven-dried wood, this requires less air
supply than when using normal wood. Turn down the air supply.
7KHJDVNHWVDURXQGWKHGRRUDUHZRUQDQGWRWDOO\ÀDW Replace the gaskets, contact your dealer.
The chimney is too large. Contact chimneysweeper or other professional for more details.
7KHJODVVLV
VRRW\
The wood is too wet. Only use dry wood with a humidity of maximum 20%.
The air vent control is closed too tightly.
Open the air vent control to add air to the combustion. When new
wood logs are inserted all vent controls should be completely opened
RUWKHGRRUVOLJKWO\RSHQHGXQWLOWKHÀDPHVKDYHDJRRGWDNHRQWKH
wood.
:KLWHJODVV
Bad combustion (the temperature is too low). Follow the guidelines in this user guide for correct combustion.
Using wrong material for combustion (such as: painted
or impregnated wood, plastic laminate, plywood etc). Ensure to use only dry and clean wood.
Smoke is
released when
the door is
opened
A levelling out of pressure occurs in the burn chamber. Open the air vent control for about 1 min before opening the door –
avoid opening the door too quickly.
7KHGRRULVRSHQHGZKHQWKHUHLVD¿UHLQWKHEXUQ
chamber. Open the door carefully and/or only when there is hot ember.
:KLWHVPRNH The combustion temperature is too low. Increase the air supply.
The wood is humid and contains water damp. Ensure to use only dry and clean wood.
%ODFNRUJUH\
black smoke ,QVXႈFLHQWFRPEXVWLRQ Increase the air supply.

51













Ø150
630
725
185
1250 - 1270
330 - 350
925 - 945
85 - 105
390
Ø 100
30 - 50
10
410
4)/ PP

52
FIG 1
=Brannmur / Brandmur / Palomuuri /Firewall / Hitzenschutzwand / Mur parfeu
=Brennbart materiale/Brændbart materiale/ Brännbart material/ Brennbarem Material / Matières combustibles /
Combustible material / Tulenarka materiaali
15
15
900
600
15
965
15
15
15
15

53
FIG 1b
15
>600cm2
>600cm2
15
550
max 100
* Med Powerstone
* With Powerstone
* Mit Powerstone
* Avec Powerstone
* Powerstonen kanssa
550
>600cm2
>600cm220
20
>460*
>340
max 100

54
FIG 1c
550
>600cm2
>600cm2
>600cm2
>600cm2
15
750
max 100
15

55
x4
FIG 2
FIG 3
x4
3 mm
10 mm
10 mm
A
B

56
FIG 4
A
B
A
B
FIG 4B
10 mm

57
FIG 5b
FIG 5
A
B
B

58
FIG 6
FIG 6b

59
30o
90o
FIG 6c
FIG 6d
Powerstone (*)
$WWHQWLRQ
See separate instruction
1%
Se egen monteringsanvisning
2EV
Se egen monteringsanvisning
$FKWXQJ
Siehe separate Montageanleitung
$WWHQWLRQ
Voir les instructions de montage
séparé
+XRP
Katso erillinen asennusohje

60
x2
1.
2.
x2
3.
90o
FIG 7
FIG 7b

61
FIG 7c
FIG 7d

62
10
10
VANADIUM
No.7
CHROME
FIG 8
A
B
&
D
E F
GH
FIG 9