Northern Industrial Tools 148823 User manual

1 5 0 - L B . T R U C K W H E E L D O L LY
OWNER’S MANUAL
WARNING: Read carefully and understand all
INSTRUCTIONS before operating. Failure to follow the
safety rules and other basic safety precautions may result
in serious personal injury.
Item #148823

Page of 3
2
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For
future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment cannot be
responsible for issues arising from modification. We strongly recommend this machine is not
modified and/or used for any application other than that for which it was designed. If you have
any questions relative to a particular application, DO NOT use the machine until you have first
contacted Northern Tool + Equipment to determine if it can or should be performed on the
product.
For technical questions please call 1-800-222-5381.
DESCRIPTION AND INTENDED USE
This heavy-duty dolly lifts up to 150 lbs. and saves backs when removing and replacing heavy
truck wheels and tires. 3-inch casters allow accurate positioning under the tire. The Dolly
supports the weight as the wheel slides off the hub. Replacing the wheel is just as simple.
Rollers on each leg allow the wheel to be rotated for stud alignment as the wheel slides on to
the hub.
TECHNICAL SPECIFICATIONS
Capacity: 150 lbs. (68kg)
Caster Size: 3in. (80mm)
Save These Instructions.
CAUTION: Do not attempt to operate the Truck Wheel Dolly until you have read and
understood this instruction manual.
•Do not exceed the weight limit of 150 lbs. (68kg) when loading the Wheel Dolly.
•Use Wheel Dolly on a flat, smooth surface only. Not intended to be used on inclines.
•Do not stand or ride on Wheel Dolly. It is not a toy.
WARNING: The warnings, cautions and instructions in this manual cannot cover all possible
conditions or situations that could occur. It must be understood by the operator that common sense
and caution are factors that cannot be built into this product, but must be supplied by the operator.

Page of 3
3
DIAGRAM & PARTS LIST
Part #
Description
Qty
Part #
Description
Qty
1
Handle Cover
1
8
Wheel
2
2
Handle
1
9
Bolt
4
3
Frame
1
10
Axletree
4
4
Screw/Nut
2
11
Axis
2
5
Screw/Nut
2
12
Roller
2
6
Pin
2
13
Roller Frame
2
7
Cotter Pin
2
NOTE: Some of the parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.
WARRANTY
One-Year Limited Warranty
Northern Tool + Equipment Co., Inc.
Burnsville, Minnesota 55306-6936
Made in China