NTI ST-C64K-HDBT-L8-R User manual

ST-C6.-HDBT-L8-R
8 HDMI over CAT5e/6/7
Point-to-Point Transmitter
Operation Manual
Operation Manual

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
$OZD\VIROORZEDVLFVDIHW\SUHFDXWLRQVWRUHGXFHWKHULVNRIÀUH
electrical shock and injury to persons.
7RSUHYHQWÀUHRUVKRFNKD]DUGGRQRWH[SRVHWKHXQLWWRUDLQ
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
VXIÀFLHQWVSDFHIRUDLUWRFLUFXODWHDURXQGWKHXQLW
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 03/08/12 Preliminary Release

CONTENTS
1. Introduction............................................1
2. Applications...........................................1
3. Package Contents ................................1
4. System Requirements............................1
5. Features..................................................2
6. Operation Controls and Functions.......3
6.1 Front Panel........................................3
6.2 Rear Panel.........................................4
7. Connection Diagram ............................5
6SHFLÀFDWLRQV ........................................7
9. Mounting.................................................8

1
1. INTRODUCTION
The 8 HDMI over CAT5e/6/7 Point-to-Point Transmitter supports the
WUDQVPLVVLRQRIXQFRPSUHVVHGYLGHRXSWRS#+]ELWZLWK
PXOWLFKDQQHOGLJLWDODXGLRIURPXSWRHLJKWKLJKGHÀQLWLRQVRXUFHVWR
up to eight CAT6 outputs. Also, the unit can be used in conjunction
ZLWKWKHð+'0,PDWUL[RSWLRQDOWRSURYLGHVZLWFKLQJFRQWURO
allowing the display of any source device on any output display.
2. APPLICATIONS
Commercial advertising and display
Lecture room display
Hyper market demonstration
3. PACKAGE CONTENTS
HDMI over CAT6 Transmitter
1×24V/6.25 A DC Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
HDMI equipped input source devices
Industry standard CAT5e/6/7 cables
5DFN0RXQWLQJ%UDFNHW[

2
5. FEATURES
HDMI, HDCP 1.1 and DVI compliant
Supports HDMI 3D and 4K×2K features
Support CEC bypass
Supports PoE (Power over Ethernet) on compatible receivers only
Supports audio up to 7.1Ch, Dolby TrueHD and DTS-HD Master Audio
6XSSRUWVKLJKELWUDWHDXGLRXSWRN+]
Supports resolutions VGA~WUXGA and 480i~1080p dependent upon
the output display’s EDID settings
6XSSRUWVXQFRPSUHVVHGYLGHRXSWRS#+]ELW
6XSSRUWVH[WHQVLRQXSWRPHWHUVWKURXJK&$7H
Supports 3D signal display dependent upon the output display's
EDID settings
Supports HDMI input up to 10 meters at 8-bit resolution or 6 meters at
12-bit resolution
8VL]HGHVLJQ
Note: The PoE function is designed for powering compatible receiver
units only³non-PoE receivers will need their own power supply.
Receivers of another brand may not be compatible.

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1
1POWER
The LED will illuminate in blue when the power is on.

4
6.2 Rear Panel
CAT Out CAT Out CAT Out
HDMI In 1 HDMI In 2 HDMI In 3
CAT Out
HDMI In 4
CAT Out
HDMI In 5
CAT Out
HDMI In 6
CAT Out
HDMI In 7
CAT Out
HDMI In 8
CAT Out CAT Out CAT Out
HDMI In 1 HDMI In 2 HDMI In 3
CAT Out
HDMI In 4
CAT Out
HDMI In 5
CAT Out
HDMI In 6
CAT Out
HDMI In 7
CAT Out
HDMI In 8
DC 24V
1
23
4
V+
GND
GND GND
V+
2 3
1
1CAT Out
Connect to the Receiver units with a single CAT5e/6/7 cable for HDMI
Audio/Video, IR, and RS-232 signals transmission.
Note: Please do not miss connect CAT5e/6/7 ports with receiver
device's LAN port doing so will destroy the device.
2HDMI In 1~8
Connect to the HDMI input source devices such as a DVD player or a
6HWWRS%R[ZLWK+'0,FDEOHVRU'9,WR+'0,FDEOHV
3DC 24V
Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet. This unit will also power PoE (Power over
Ethernet) capable receiver units or non PoE receiver units.

5
7. CONNECTION DIAGRAM
D1 D2 D3 D4D1 D2 D3 D4
RXRXRX
RX
ZONE AZONE B
Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link
ZONE
Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link
ZONE
Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link
LA IR In
RS 232 Ser i e
A
I Out
1I In
B
I Out
2I In
C
I Out
3I In
Receiver Units
Single
CAT 5e/6
Cable
HDMI Outputs
Displays
Source
Equipment
HDMI
Inputs
8x8 HDMI Matrix
(Optional)
Transmitter

6
DDDDDDDD
D 24V
RXRXRXRX Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link Power
Extender Blaster
IR 2
IR 1 RS232 Out CAT5e/6In
Link
ZONE EZONE ZONE ZONE
C 2
I Out
I In
E
I Out
5I In
I Out
6I In
I Out
I In
I Out
I In
12
3
1
23
1
23
1
23
Power Supply
Power Supply

7
8. SPECIFICATIONS
Video Bandwidth 0+]*ESV
Input Ports 8×HDMI
Output Ports 8×CAT5e/6/7
Input / Output Resolution VGA~WUXGA, 480i~1080p
HDMI Cable Distance Up to 10 meters@8-bit, 6 meters@12-bit
CAT Cable Distance Up to 100 meters@CAT5e/6/7 cable
ESD Protection Human-body Model:
±8kV (Air-gap discharge)
±4kV (Contact discharge)
Power Supply 24V/6.25A DC (US/EU standards, CE/
)&&8/FHUWLÀHG
Dimensions 432mm (W)×179mm (D)×49mm (H)
Weight 2000g
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF
Storage Temperature ïC~60 ºCïF~140 ºF
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 71W (Including PoE Receiver)

9. Mounting Ears
The ST-C64K-HDBT-L8-R includes two ears for mounting
to a rack.
There are two screws on each side of the ST-C64K-HDBT-L8-R for mounting these ears.
Remove the screws, place the ear, and reinstall the screws.
Mount the ears facing
the front.......
.......or facing the rear.
MAN315 REV 2/5/20
8
Table of contents
Other NTI Transmitter manuals
Popular Transmitter manuals by other brands

BWI Eagle
BWI Eagle AIR-EAGLE SR PLUS 36-1800-120VAC Product information bulletin

Siemens
Siemens SITRANS P DS III operating instructions

YOKOGAWA
YOKOGAWA Dpharp vigilantplant EJA110A user manual

Vaisala
Vaisala CARBOCAP GMT220 SERIES user guide

M-system
M-system M5 Series instruction manual

Siemens
Siemens SITRANS L Series Compact operating instructions