Nuga MHP-100 User manual

MHP-100
ENGLISH / CE H/H / Rev. 08-01
2016.05.17
[ ENGLISH ]
User Manual
Thank you for purchasing this product.
Before use...
Please read the cautions for safety in the
user manual to use this product safely.
Tourmanium Product
Quality Warranty Enclosed
www.nuga.kr
185, Jiraeul-ro, Jijeong-myeon, Wonju-si,
Gangwon-do, Korea
TEL : [phone] / FAX : [phone]
http://www.nuga.kr

Product Components
Names and Functions of Product
Descriptions for Controller Buttons
How to Use Product
How to Take EmergencyActions during Use
How to Store and Clean after Use
Self-check Items
Before anyA/S request
Indicator Window for Checking Remote Controller
Product Specifications
Product Warranty
8
9
10
14
17
20
21
22
23
24
25
Product Introduction
How to Use Product
Product Storage and Care

MHP-100
Cautions for Safety
Contents Cautions for Safety
Cautions for your safety
Disclaimer
· These cautions include descriptions for the safety of users and prevention
of any damage to properties among others.
· Read through the following details to use the product appropriately.
· This Manual classifies the risk level into following three degrees and the
following graphical symbols remind users of cautions for matters and
operations of concerns about any risk.
· The manufacturer, importer and/or agent shall not be responsible for any
problem and/or other damage to the product which has been caused
from the user’s fault or operation.
· Information in the user manual has been prepared on the basis of the current
product specifications.
· Details in the user manual might be different from those on the product.
· The product manufacturer will be adding and supplementing new functions
at any time and new technologies shall be applied to the product continuously
in the future as well.
· All the standards and functions are subject to change without any notice
to users to improve performance.
Interpretations on symbols
Caution
If there is a possibility of a minor injury or damage to goods due to
non-compliance.
Danger
If there is high possibility of death due to non-compliance.
Warning
If there is a possibility of an injury or death due to non-compliance.

Avoid pulling out the power cord parts or touching
the power plug with the wet hands.
(Otherwise, it might cause electrical shock or fire.)
Do not use it for other usages than the described
purposes of uses.
(Otherwise, it might cause damage to the product.)
Anyone using a cardiac pacemaker should consult
with a doctor before any use of this product.
Do not apply washing or dry-cleaning.
(Otherwise, it might cause damage to the product or
any danger of electric shocks or fire.)
 
Anyone other than technicians qualified for our
company’sA/S should not disassemble, repair
or modify the product for any reason.
(Otherwise, it might cause damage to the product
or electric shock and/or fire.)
Do not allow children use the product alone.
Do not place any heavy object or other electric heater
on this product.
(Otherwise, it might cause injuries or damage to the
product.)
Avoid bending the power cord excessively or pressing
it down with heavy objects.
Never use other temperature controllers with different
specifications.
(Otherwise, it might cause damage to the product.)
Do not place any inflammable substances such as the
candle light, cigarette light and/or wine among others,
any vessel containing water, heavy object and other
substances.
(Otherwise, it might cause fire.)
Do not place the controller covered with a blanket
during use.
(Otherwise, it might cause damage to the product
or a danger of fire.)
Do not fold the device excessively during use.
Make sure it is laid flat or use a cushioning material
for storage.
(Otherwise, it might cause damage to the product.)
MHP-100
WarningDanger
Cautions for Safety

MHP-100
Separate the power cord while the product is not
being in use for a long time.
Keep any pin, wire or other metallic pieces from
stabbing or inserting to the product.
(Otherwise, it might cause damage to the product.)
Use the product in a proper range of temperature
(50~60୅).
(Otherwise, it might cause burns.)
Do not expose the product to the direct sunlight.
(Otherwise, it might cause damage to the product.)
Check out the applied voltage before any use and
apply the power plug only to a dedicated socket.

MHP-100
Please abide by defined time and methods.
Product Components
Names and Functions of Product
Descriptions for Controller Buttons
8
9
10
Product Introduction
Caution
]WGGGGGGGGGGGGGGGG]W
\WGGGGGGGGGGGGGGGG\W
[WGGGGGGGGGGGGGGGG[W
ZWGGGGGGGGGGGGGGGGZW

MHP-100
 Product Introduction
Names and Functions of ProductProduct Components
Heater
ControllerUser Manual
ⴙController
ⴘPower cord ⴚHeater
It has a heating function as the tourmanium is
combined to the heater.
ⴚHeater
It can set or select the temperature of the heater.
ⴙController
Name Function
It is connected to an outlet to input the power supply
to the product.
ⴘPower cord
http://www.nuga.kr
MHP-100
User Manual
Thank you for purchasing this product.
Before use...
Please read the cautions for safety in the
user manual to use this product safely.
Tourmanium Product
Quality Warranty Enclosed
[ ENGLISH ]
i
Introduction
Please check out whether all the components are unpacked in hand
before installing the product.
Please inquire from of your supplier if there is any missing or
damaged component.
Some specifications and/or designs are subject to change for
improving the product performance.

 
MHP-100
 




Descriptions for Controller Buttons
Lamp to indicate the product’s operating
status
ྛOperation
indicator lamp
Window to indicate setting/current
temperature of the product
ྚTemperature
indicator
window
Lamp to display turn on/off of the controller
ྙPower
indicator lamp
Button to turn on/off the power for the
product and controller
ྜPower button
Dial to control the product’s temperature
Cable receiving power from the controller
nd exchanging signal for temperature
control
ྜྷTemperature
control dial
ྞHeater
connecting
cable
Name Function
Product Introduction

Memo

MHP-100
MHP-100
How to Use Product
How to Take EmergencyActions during Use
14
17
How to Use Product

 
MHP-100
How to Use Product
How to Use Product
TUFQ
Press the power button on the
controller to turn on the power
supply for the product and
controller after connecting the
power cord to a socket.
Power
Indicator Lamp
The current temperature
is shown on the
temperature indicator
window.
The current temperature
is shown on the temperature
indicator window after the
user’s setting temperature is
blinking three times.
Alight is lit on the operation
indicator lamp if the current
temperature is higher than
the setting temperature.
TUFQ
Turn the temperature control
dial clockwise on the controller
to set the desired temperature.
(30~70୅)
TUFQ
Keep the product tightly close
to the desired area in the body
after setting the temperature.
Before using product
'RQRWXVHLWIRURWKHUXVDJHVWKDQWKHGHVFULEHGSXUSRVHVRIXVHV
'RQRWIROGWKHSURGXFWLQXVH
&KHFNRXWWKHYROWDJHLQXVHEHIRUHDQ\XVH
$Q\RQHXVLQJDFDUGLDFSDFHPDNHUVKRXOGFRQVXOWZLWKDGRFWRU
before any use of this product.
1HYHUXVHRWKHUWHPSHUDWXUHFRQWUROOHUVZLWKGLIIHUHQWVSHFLILFDWLRQV
'RQRWSODFHWKHFRQWUROOHUFRYHUHGZLWKDEODQNHWGXULQJXVH
8VHWKHSURGXFWLQDSURSHUUDQJHRIWHPSHUDWXUH
i

TUFQ
 
MHP-100
How to Take Emergency
Actions during Use
Then, all the lamps on the
controller are tuned off.
Press the power button to
turn off the power on the
product and controller if you
want to stop using the
product.
TUFQ
Remove the power cord from
the socket in any case after
using the product.
The power supply on the
product is automatically
turned off after 8 hours.
Notice
How to Use Product
i
Stop using the product immediately and remove
the power plug if there is any lightning.
Stop using the product immediately and contact
your supplier branch or our company if you smell
any burn or detect any smoke from the product.
Stop using the product immediately and consult
with a doctor if any abnormality occurs to the
human body.
Turn off the power switch immediately, stop using
the product and contact our company if you find
out any failure or power failure from the product.
Turn off the power switch, remove the power
plug immediately, and then contact our company
if you have poured water into the product.

Memo

MHP-100
MHP-100
How to Store and Clean after Use
Self-check Items
Before anyA/S request
Indicator Window for Checking
Remote Controller
Product Specifications
Product Warranty
20
21
22
23
24
25
Product Storage and Care

 
MHP-100
How to Store and Clean after Use
Product Storage and Care
Self-check Items
Check before use
1. Is the power cord connected to an outlet?
2.Are lights on the power lamp and operation
indicator lamp turned on when the power
supply is applied?
3. Is the temperature indication displayed on the
temperature indicator window on the controller?
4. Is the temperature increasing well in the
product?
5. Is the temperature in the product not too high?
6. Did you check out conditions for any damage
to the power cord or cable conditions?
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Check after use
1. Is the power supply automatically turned off
after 8 hours?
2. Is the temperature on the temperature indicator
window on the controller turned off?
3.Are lights on the power lamp and indicator
window turned off?
4. Is the power cord removed from the outlet?
5. Is the place to keep the product exposed to
the humidity dust and/or chemicals?
Controller
Wipe it out with a piece
of dry cloth if there is
any foreign substance.
Product top
Wipe it out with
wax for leather
or dry cloth.
'XULQJRSHUDWLRQWHPSHUDWXUH~35୅KXPLGLW\a
7UDQVSRUWDQGVWRUDJHFRQGLWLRQVWHPSHUDWXUHa୅),
KXPLGLW\aDWPRVSKHULFSUHVVXUHK3DWRK3D
Introduction
1. Separate the power cord while the product is not in use for a long time.
2. Be aware of the following for the storage place.
ྙKeep the product in a place with no water.
ྚKeep the product in a place with no concern of any adverse effect such
as the air pressure, temperature, humidity, ventilation, sunlight and/or
air containing dust, salt, sulfur, etc.
ྛBe careful of safety conditions such as the slope, vibration, shock, etc.
LQFOXGLQJWKRVHGXULQJWUDQVSRUWDWLRQ
ྜDo not keep the product in a place near any chemical or gas.
ྜྷAvoid any direct sunlight during the storage.
3. Store the product after cleaning the components.
Caution
Ensure unplugging of the power plug before cleaning.
Otherwise, it might cause electric shocks.
How to clean
Environmental conditions
iCaution
7KHUHPLJKWEHFRQFHUQVRILQMXULHVRUILUHLI\RXIDLOWRFKHFNRXW
the following. Make sure that you check out the following.

 
MHP-100
Before anyA/S request
Indicator Window for
Checking Remote Controller
Checklist for any abnormality in the power supply
If there is no power
supply on the
power lamp;
ྙCheck out if the power plug on the
controller is connected to an outlet.
ྚCheck out if the power button in the
controller is pressed to turn on the product.
ྛCheck the operating voltage.
Checklist for any abnormality in the heating
If the temperature is
not increasing in the
product;
ྙCheck out if the power button in the
controller is pressed to turn on the product.
ྚCheck out if the temperature is set to too
weak.
ྛDo not disassemble the product but contact
your supplier or our company.
Display Descriptions Display location
Disconnection of
temperature sensor Temperature Indicator Window
Short circuit of
temperature sensor Temperature Indicator Window
Overheating
in heating material Temperature Indicator Window
Overheating
in controller Temperature Indicator Window
Product Storage and Care
Caution
Ensure checking out the following before applying forA/S if any
abnormality occurs in the product.
The product might fail to operate normally even without any failure
if you use it with no right understanding on how to use it.
Caution
Do not disassemble the product arbitrarily if any error occurs, but
remove the power plug, turn off the power switch, and then contact
your supplier.
If you disassemble the product arbitrarily, it might cause serious
injuries and/or damage to the product.


MHP-100
Product Specifications
Thermal massager
MHP-100
Marked on the product
3.3 kg
580 X 760 X 15 (mm)
Refer to the user manual
Refer to the user manual
AC 220–240V~, 50–60Hz
150 W
NUGA MEDICAL CO.,LTD.
185, Jiraeul-ro, Jijeong-myeon, Wonju-si,
Gangwon-do, Korea
Product name and
model name
Date of manufacture /
number of manufacture
Product weight
Product size
Cautions during use
Power consumption
Electric rating
Manufacturer
Operating method

Memo Memo
 Memo
MHP-100