Nuova Simonelli Aurelia User manual

technical deparment
AURELIA WAVE DIGIT
AURELIA WAVE MAINTENANCE CHECK LIST
Daily Maintenance
Average time 15 mins
Clean the machine
Autowash the group heads with blind filter
Weekly Maintenance
Average time 30 mins
Clean the machine
Autowash the group heads with blind filter & cleaner
Clean the group screens
Clean the portafilters and baskets
Nuova Distribution USA LLC | 360-366-2226 | simonelliusa.com
Clean the drain tray

technical deparment
Autowash Guide
Take one of the portafilters and replace the basket with a blind filter basket.
Clean group screen with a brush.
Add cleaning product to the blind basket and engage it into the group.
NOTE: Can be tablet or powder
• Tablets: 1 or 2 tables
• Powder: Pour until it is the size of a dime.
Using the touch screen select the desired group by taping it.
Press and hold the autowash button located below the touch screen.
Once the desired group head is selected. The cycle will start.
Note: The screen will show all heads and their current
cycle if done correctly.

technical deparment
Autowash Guide
The cleaning process is now complete. Tap the home/back button to
resume normal operation. Remove portafilters and replace blind baskets
with normal baskets.
Once the first cycle is complete disengage the portafilter from the group head and
dump the contents. Re-engage the portafilter and run a cycle without cleaner.
Portafilter & Basket Guide
Remove the portafilter and remove the basket
Grab a steam pitcher and place the portafilter and the basket inside it. Fill the
pitcher with hot water until it gets close to the black handel of the portafilter. Add
1 to 4 cleaning tablets or some cleaning powder. Let sit for 15 mins - 12 hours.
Rinse the pitcher, portafilter, and basket once clean.
15 min - 12 hours
Rinse with fresh water

technical deparment
Group Screen Removal
Add the screen & dispersion plate to the cleaning mixture with your portafilter
or create a new mixture using 1 to 2 tablets or some cleaning powder.
Using a screwdriver loosen the group head screw. Warning: If the machine is
powered the screen and plate will be very hot. Using a rag (if hot) completely
loosen the screen until the screen and dispersion plate drop.
Resemble your screen, dispersion plate, and screw. Using your hand or screw-
driver (if hot) slowly screw the pieces into place. Tighten until resistance is felt.
Do not overtighten.
Note: If the screw is to tight to loosen or is beginning to strip call your
local technician.
Nuova Distribution USA LLC | 360-366-2226 | simonelliusa.com