Operation Guidance
7
The initial charging is crucial to the battery performance of the product.
When charging for the first time, plug your new Discover 300 into an AC
outlet until fully charged.
How to use the product:
·Low temperatures can impact both the battery capacity and the output power.
·It can power your devices at temperatures ranging from 32℉~104℉(0℃~ 40℃).
·If the product is charged at a temperature below 32℉(0℃), we suggest it be
placed in a dry and insulated environment.
·If the battery temperature is higher or lower than the standard range, the warning
indicator on the LCD will light up.
Working Temperature Range
Press the AC/DC power button to start up corresponding output.
When the red light next to the port is on, the output port is on and can
power the corresponding device.
Attention: When not using certain ports, make sure to turn them off
to conserve power.
The rated power of the AC output is 300W. Power over 300W will
cause the product to cut off automatically for overload protection.
When the AC output power reaches 300W, the 12V DC output will be
cut off to prioritize the power supply to the AC output.
