NuTone 644201 User manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
70D 99042716D
Provides high ventilation and durable contruction
to meet the needs of professional-style home
cooking appliances.
Note: A complete installation requires several optional
components. (See back for system diagram.)
FEATURES
•Widths
- 30” to 48” in 6” increments
•Finishes
- Stainless Steel (type 430, 22 ga., #4 brush)
- Appliance colors in White, Black, and Biscuit (22 ga.
Galvanneal)
•Filters
 - Aluminumgreaseltersaredishwashersafe
 - Bafeltersavailable
•Lamps
- Halogen lamps (120V, 50W, PAR20)
  2for30”&36”widehood,3for42”&48”hoods
(Purchase separately)
 - Dualinfraredfoodwarminglamps(120V,IR175W,
PAR38) (Purchase separately)
- Warminglampscanbereplacedwith90Whalogen
 whitelamps(120V,90W,PAR38)
•Controls
 - Solid-State,innite-speedblowercontrolwithspeed
memory
 - Exclusive,HeatSentryTM-turnsblowerONtoHIGH
 speedwhenexcessheatisdetected
• RMPSeriesBacksplash(Optional)
 - 30”to48”widthsin6”increments
 - StainlessSteelconstruction-protectsbackwalland
 wipescleaneasily
 - Two,dual-positionfoodwarming/condimentstorage
shelves
• ModelRBFBafeFilters(Optional)
 - StainlessSteelconstructionforeasycleaning
SPECIFICATIONS
Volts Hz Amps (without blower)
120 60 4.2(42”&48”hoods)
  3.75(30”&36”hoods)
64000 SERIES
RANGE HOOD
Broan-NuTone LLC, 926WestStateStreet,Hartford,WI53027(1-800-637-1453)
Intended for
domestic
cooking only.

HL0070
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
Model 418
10” round
adjustable elbow
(optional)
Model 412
transition
(31/4” x 10” to 7”)
Adapter and damper 31/4” x 10”
(supplied with P5 and P8 blowers)
Adapter and damper 31/4’’ x 14’’
(supplied with P8 blower)
Standard duct
(31/4” x 10”)
Duct
(31/4” x 14”)
Model P5
single-blower
(500 cfm)
64000 SERIES HOOD
-64000 SERIES RANGE HOOD SYSTEM -
INTERIOR BLOWERS
Flow deviator
(vertical exhaust only)
(supplied with P5 and P8 blowers)
Model 647
(7” Rd wall cap)
Model 634 or 644
(roof cap)
Model 643
(8” Rd wall cap)
8” round
standard
duct
Model 407
(7” round -
2 ft. sections)
Model 413
transition
(31/4” x 10” to 8”)
Model 459 transition
(31/4” x 14” to 8”)
Model P8 dual-blower (900 cfm)
for use with 36’’ hoods or wider
NOTE: The dual blower P8 can be
installed either with 31/4’’ x 14’’ or
31/4’’ x 10’’ ducts. For optimal air
and quiet sound performance,
use 31/4’’ x 14’’ ducts.
Rough-in kit
(supplied with P5 and P8 blowers)
Model 415
7” round adjustable
elbow (optional)

HL0071
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
64000 SERIES HOOD
-64000 SERIES RANGE HOOD SYSTEM -
IN-LINE AND EXTERIOR BLOWERS
332KR in-line and exterior blower
rough-in kit - Purchase separately.
Model 418
10” Rd
adjustable elbow
(optional)
Model HLB3 (280 cfm)
in-line blower
(includes one 8” to 10”
round transition)
Model 331H (600 cfm)
or 332H (900 cfm)
exterior blower
Model 335 (1200 cfm)
or 336 (1500 cfm)
exterior blower
Model 441
(10” Rd wall cap)
Model 437
(High capacity roof cap)
Model 441
(10” Rd wall cap)
Model 421
(10” Rd. vert.
in-line damper)
Recommended
for use with
exterior blowers
Model 410
(10” Rd duct -
2ft. sections)
Model HLB6 (600 cfm)
in-line blower
(includes two 4½” x 18½”
to 10’’ round transitions)
Model HLB9 (800 cfm)
or HLB11 (1100 cfm)
in-line blower
(includes two 8” x 12” to
10’’ round transitions)