NuWave MOSAIC 30801 User manual

MOSAIC®Precision Induction Wok
Owner’s Manual
Model: 30801 - 30802
Rev.1
Questions or Concerns?
For Amazon Purchases: support@nuwavenow.com
For All Other Purchases: help@nuwavenow.com

4| nuwavenow.com
DANGER – To reduce the risk of
electrocution:
1. Do not use outdoors.
2. Read all instructions, safeguards,
and warnings before using
the appliance.
3. Do not place appliance where it
can fall or be pulled into water or
other liquids.
4. Do not reach for an appliance
that has fallen into water. Unplug
immediately. Do not immerse cord,
plug, or any portion of appliance
in water or other liquids.
WARNING – For individuals with
pacemakers:
1. This appliance emits an
electromagnetic eld that is
strongest within 2 feet of the cooking
surface.
2. Scientic tests have proven
inconclusive as to whether the
electrical eld will disrupt the
function of a pacemaker. Please
consult your doctor or medical
professional for guidance before
use.
WARNING – To reduce the risk of burns,
electrocution, re, or injury:
1. This appliance is not meant for
continuous use.
2. This appliance includes a heating
function. Surfaces may develop
high temperatures. Do not touch
hot surfaces. Induction Wok Base
may retain residual heat after Wok
has been removed. The use of
pot holders or alternative safety
SAFEGUARDS & INFORMATION
READ ALL INSTRUCTIONS and WARNINGS The failure to follow any of the important
safeguards, warnings, or instructions for safe use is a misuse of the wok that can void your
warranty and create the risk of serious injury. When using the Wok, only use the appliance
as intended and for no other use, and always follow basic safety precautions.
ALWAYS KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
measures is highly recommended.
3. This appliance should not be used
by children. Close supervision is
necessary when this product is used
near children.
4. Do not place on any gas or electric
burner or in a heated oven.
5. Do not place metallic objects such
as knives, forks, spoons, or lids on
the Induction Wok Base as they
may become hot.
6. This appliance is not intended for
commercial use.
7. Use this appliance for its intended
purpose as described in this
manual. Do not use any other
accessories or attachments not
recommended by the manufacturer.
They may result in re, electrical
shock, or personal injury. It is
recommended to only use supplied
Wok with the Precision Induction
Base.
8. Never operate this appliance if it
has a damaged cord or plug, is not
working properly, has been dropped
or damaged, or dropped in water
and contact Customer Service.
For Amazon purchases:
support@nuwavenow.com
For All Other Purchases:
help@nuwavenow.com
9. Do not operate a broken Induction
Wok Base. If Induction Wok Base
should break, cleaning solutions
and spillovers may penetrate the
appliance and create a risk of
electric shock.

nuwavenow.com | 5
1. Keep cord away from heated
surfaces. Do not let the cord hang
over the edge of the table or counter.
Never force the plug into an outlet.
Always unplug power cord by pulling
on the plug. Turn the unit off before
removing the plug from the wall.
2. Do not operate where aerosol
(spray) products are being used or
where oxygen is being administered.
3. This appliance should never be
set up around unattended children
or those unaware of its presence.
The appliance should be situated
on at, stable surfaces, away from
water sources such as pools, spas,
sprinklers, hoses, etc.
4. Do not move the appliance while hot.
5. This appliance is for household
use only; it is designed to process
normal household quantities. It
is not suitable for continuous or
commercial operation.
6. Do not disassemble the product.
There are no user serviceable parts.
7. Do not leave the appliance
unattended while in use.
8. This appliance is not intended for
operation by means of an external
timer or separate remote-control
system.
9. Clean Induction Wok Base with
caution. Cleaning a hot surface with
wet applications can cause steam
and some cleaners can produce
dangerous fumes. Unplug from
outlet before cleaning.
10. Use caution when disposing of hot
grease.
11. Keep this manual handy for future
reference.
SAFEGUARDS & INFORMATION
ALWAYS KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
Electrical Information
1. The short cord length of this appliance
was selected to reduce safety hazards
that may occur with a long cord.
2. An extension cord may be used with
this appliance if:
a) The marked electrical rating of the
extension cord is rated at least as
great as the electrical rating of the
appliance.
b) The longer is arranged so that it
does not drape over the countertop
or tabletop where it could be
accidentally pulled off or tripped over.
3. Certain models of this appliance may
have a polarized plug (one blade is
wider than the other). This plug is
intended to t into a polarized outlet
only one way. If the plug does not t
fully into the outlet:
a) Reverse the plug.
b) Contact a qualied electrician (if
reversing plug does not work).
DO NOT ATTEMPT TO MODIFY PLUG IN
ANY WAY.
WARNING
Electric shock hazard. Use with
adequate electrical system.
Do not use if cord or plug is damaged.
WARNING: All items on the Induction
Wok can get very hot during cooking.
Please be careful when removing these
items from the unit. Always wear oven
mitts or use pot holders. Induction Wok
may retain residual heat after Wok has
been removed. Allow everything to cool
completely before cleaning.
For Amazon purchases:
support@nuwavenow.com
For All Other Purchases:
help@nuwavenow.com
SAVE THESE INSTRUCTIONS

6| nuwavenow.com
2
1
3
4
5
2
1
3
4
5
PARTS & ACCESSORIES
Vented Tempered-
Glass Lid
Dishwasher-safe
Part #: 31752
14-inch Carbon
Steel Wok
Carbon Steel
4QT or 16 cups
Easy Grip Silicone
Handle
14”D, 19.5”L w/
handle, 4.5” H
Wok Base & Wok:7”H
Part #: 31751
Induction Wok Base
3 Feet Cord
15.5”L, 12.5”D, 4.5”H
Part #: 31755
Deep Frying Rack
Dishwasher-safe
Chrome Coated
14”L
Part #: 31754
Wok Stand
Dishwasher-safe
Chrome Coated
9”D, 2”H
Part #: 31753
The Wok Stand can be
used as a serving tray.

nuwavenow.com | 7
Before use, wipe surface with a damp dishcloth or
sponge, and dry thoroughly.
IMPORTANT - Do not immerse unit in water or
attempt to cycle through dishwasher. Make sure unit
has cooled completely prior to cleaning. The outer
surface may be cleaned by wiping carefully with a
damp dishcloth or sponge.
AFTER USE:
• Clean after each use.
• Unplug the unit before cleaning.
• Make sure unit has cooled completely prior to cleaning.
• The outer surface may be cleaned by wiping carefully with a damp dishcloth or
sponge.
• Remove the power plug prior to cleaning the NuWave Precision Induction Wok™.
Do not use caustic cleaning agents. Water should not penetrate the interior of the
Induction Wok Base.
• Never immerse the NuWave Precision Induction Wok, its cables, or plug in water or
other liquids.
• Wipe the glass surface with a damp cloth or use a mild, non-abrasive soap solution.
Make sure the unit has cooled completely before cleaning.
• Wipe casing and operating panel with a soft cloth dampened with water or a mild
detergent.
• Do not use oil-based cleansing products as their use may damage plastic parts or the
casing/operating panel.
• Do not use ammable, acidic, or alkaline materials or substances near the NuWave
Precision Induction Wok, as this may reduce the service life of the Induction Wok
Base or pose a re risk when the Induction Wok Base is in use.
• In order to keep your NuWave Precision Induction Wok looking like new, take
measures to ensure that the bottom of Wok does not scrape the unit’s glass surface,
although a scratched surface will not impair the use of the Induction Wok Base.
• Make sure to properly clean the unit before storing it in a cool, dry place.
Important Tips:
1. Check power outlets to ensure proper operation. Do not use in an outlet where
other major appliances are engaged. Check settings if the unit is cooking too
slowly.
2. The electrical plug must be properly plugged into the outlet.
3. Always turn off and unplug the unit before wiping.
CARE & MAINTENANCE

8| nuwavenow.com
Wok
Wok Stand
Note: Before seasoning the wok, it is recommended to clean the wok before rst use. The
Wok, Lid, Deep Frying Rack, and Wok Stand are dishwasher safe.
Seasoning the Wok
1. Make sure the Wok has been thoroughly cleaned and dried.
2. Heat the Wok and rub with 2 tablespoons of vegetable oil on the wok surface in a
circular motion using a dry towel or multiple layers of paper towels, using tongs for
protection. (Caution: Surface Will Be Hot!)
3. Make sure the entire Wok is coated with oil, then allow the Wok to cool to room
temperature.
4. Repeat this process twice, ensuring the Wok is cooled each time.
5. The Wok is now seasoned!
Cleaning the Wok:
1. After Wok has been used to cook, simply wipe Wok clean with a paper towel or a
dry rag.
• If the Wok is very dirty and requires a more thorough cleaning, wipe the Wok
using clean oil or a bamboo brush (eucalyptus has antibacterial properties) to
scratch off any encrustations. Simply run water into Wok and scrub away until
residue is gone.
2. Dry the Wok thoroughly after cleaning.
3. When all residue has been removed from the Wok, repeat the seasoning process.
If a more thorough cleaning is needed:
1. Heat the Wok.
2. Add 2 tablespoons of peanut oil and add several tablespoons of kosher salt.
3. Give Wok a hard scrub with a folded paper towel. (Caution: Surface Will be Hot!)
4. Cool the Wok.
5. Rinse under running water and dry thoroughly.
• Afterward, a light rub of peanut oil can be applied to Wok once again.
Note: The “conventional” ideas of cleanliness and hygiene with cookware are somewhat
counterproductive when dealing with a genuine wok—the residues that remain on the
Wok’s surface after dry-wiping it after use will, over time, form a layer that will serve to
enhance the taste of your stir-fried foods.
Deep Frying Rack
Lid
CARE & MAINTENANCE

nuwavenow.com | 9
General Operating Instructions:
• Place the Induction Wok Base on a stable, level, non-metallic surface.
• Never use the Induction Wok Base on a ammable surface (e.g., tablecloth, carpet, etc.).
• Do not block the ventilation slots of the Induction Wok Base. This may cause the unit
to overheat. Maintain a minimum distance of 3-5 inches from walls and other objects,
appliances, etc.
• Do not place devices or objects that are sensitive to magnetic elds on top of or next
to the NuWave Precision Induction Wok™(e.g., credit cards, cellphones, radios, TVs,
video recorders, etc.).
• Do not use the Precision Induction Wok in the proximity of open res, heaters, or
other heat sources.
• Do not place on stovetop.
• Ensure that the power cable is not damaged or compressed beneath the Induction
Wok Base.
• The power cable must not come into contact with sharp edges and/or hot surfaces.
• Prior to connecting the Precision Induction Wok, conrm that the voltage needs
indicated in this manual correspond to the voltage supply in your home. A wrong
connection may lead to the unit’s damage and possible injury to persons.
• In the event that damage to the unit is observed, immediately disconnect the
Precision Induction Wok from the power supply.
INSTRUCTIONS
CONTROL PANEL
Press to
quickly clear
& pause
Turn to
adjust
temperatures
Digital LED
displays times
& temperatures
Quickly
heat to
desired
temperature
10 Stages lets
you adjust
temperatures
and times.
3 different
watts.

10 | nuwavenow.com
On/Off Function:
1. Press “ON/OFF” once to turn on. “0”
will be displayed.
2. Press “ON/OFF” again to turn the
unit off.
Watts Function:
1. The default wattage is set to 1500.
Press “watts” repeatedly to switch to
600, 900, and back to 1500 watts.
• When you turn unit off and on
again, the previous watts selected
will remain in the Wok until
changed.
F/C Function:
1. Press “stage” and “watts”
simultaneously until you see “F” or
“C” ashing.
2. Press “stage” to switch from “F” to
“C” and vise versa.
3. Press “on/off” to complete the
selection.
Pause/Clear Function:
1. Press “pause/clear” once to pause
the unit.
• The temperature selected will be
displayed and “F” will be ashing.
• If have selected “TIME” and you
press “pause”, “TIME” will not
be ashing.
• To resume cooking, press “start”.
2. Press “pause/clear” again to clear
any program out.
Quick Start:
1. After you turn the unit on, press
“start” on the dial. “375F” and
“TEMP” will be displayed and the
countdown will begin.
• The Wok is defaulted to 375F for
20 minutes.
Temperature Function:
Simply turn the dial to decrease or increase
temperature.
• Located on the left dial.
• Temperature range 100-575F in
5-degree increments.
INSTRUCTIONS Time Function:
Simply turn the dial to decrease or increase
time.
• Located on the right dial.
• Time range is from 1 minute to 9 hours
and 59 minutes (Time is in Hours and
Minutes).
Stage Function:
1. Press “stage”. “STAGE” will be
ashing and “1”, “TIME”, and “00:00”
will be displayed.
2. Set time and adjust temperature, if
needed.
3. Press “stage” again. “STAGE” will
be ashing and “2”, and “TIME”, and
“00:00” will be displayed.
4. Set time and adjust temperature, if
needed.
5. Repeat steps, if necessary.
• You can create up to 10 stages.
Stage 10 will display as “0”.
6. Press “start”.
Preheat Function:
1. Press “preheat”. “PREHEAT” and
“375F” will be displayed.
2. Adjust time and adjust temperature,
if needed.
• Preheat program has a default of
375F for 20 minutes.
3. Press “start”. Selected temperature
and “F” will be ashing.
4. Once the temperature you selected
has been reached, “selected
temperature” and “ready” will be
displayed indicating the Wok will
hold that temperature for 5 minutes
or until you press “start”.
5. Once you press “start”, the
countdown you selected will begin
with the programmed temperature.
• If you press “pause” when the
unit is preheating, “5” will be
ashing, indicating the Wok will
hold the program for 5 minutes or
until you press “start”.

nuwavenow.com | 11
TROUBLESHOOTING GUIDE
• When any of the above error messages displays on the LED, the unit will “beep” at
least once.
• The fan will run up to a maximum of 60 seconds after pressing “pause/clear” once.
Continue cooking by pressing “start” within 45 minutes.
• The unit will turn off after 45 minutes if no buttons (such as “start”) are pressed. When
the unit shuts off, it will clear all previous cooking history.
• After pressing “pause/clear” twice or cooking has stopped, the fan will run up to a
maximum of 60 seconds until the unit cools. At that point, the NuWave Precision
Induction Wok will turn off.
Error Message Solution(s):
E1
An E1 reading typically means that your NuWave Precision Induc-
tion Wok™does not detect Wok on its surface. This can occur for
one of two reasons:
1. The induction coils contained within the NuWave Precision
Induction Wok will only work when they are in direct
contact with a piece of Wok. To maintain your appliance’s
effectiveness, always ensure that it rests on a at surface and
that contact is consistent with your Wok.
2. An E1 message may also occur if your Wok is not induction-
ready.
It is recommended to only use supplied Wok with the
Precision Induction Base.
E2 The unit is malfunctioning. Contact customer service.
E3 The unit’s voltage is too low. Minimum = 85 volts
E4 The unit’s voltage is too high. Maximum = 144 volts
E5 The unit is malfunctioning. Contact Customer Service.
E6 The unit is malfunctioning. Contact Customer Service.
E7
Overheating or air ventilation is obstructed. If internal
temperature exceeds 230˚F, operation will cease and a
“beep” noise will be produced. Press “pause/clear” twice.
Wait for the unit to cool.
E8
Overheating or if unit exceeds a temperature 20˚F
higher than sear, the appliance will turn off. Contact
Customer Service.
E9
The unit is malfunctioning. Email Customer Service.
For Amazon purchases: support@nuwavenow.com
For All Other Purchases: help@nuwavenow.com
In programming mode, when the total entered time
reaches the appliance’s limit of 99:59, no additional stages
can be inputted.
FULL

12 | nuwavenow.com
When the Wok is off of the NuWave Precision Induction Wok
Initial Single beep
“F” or “C”
or “Sear” or
“:” Flashing
After returning the
Wok to the surface of
the NuWave Precision
Induction Wok, it will
automatically resume
cooking.
<10 seconds None
“F” or “C”
or “Sear” or
“:” Flashing
11-70 seconds Yes E1 Resume cooking by
pressing “start”.
After 70 seconds None 0 Cooking stops.
TROUBLESHOOTING GUIDE
Correct Disposal of This Product
This marking indicates that this product should not be disposed of with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use return and collection systems or contact the
retailer where the product was purchased. They can handle environmentally-
safe recycling.
IMPORTANT – FCC Information:
Warning: Changes or modications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
Note: The device complies with part 18 of the FCC Rules.
Other manuals for MOSAIC 30801
1
Table of contents
Other NuWave Kitchen Utensil manuals