NVX Light Cube Series User manual

Item No. : GlowXP1
GlowXS2
Light Cube

Thank you for buying our product, you can use this speaker to stream music from
smartphone, tablet, PC or Mac through Bluetooth. Please read this manual before
use and retain it for future reference.

Box Contents
Specications
●
●
●
●
Speaker （GlowXP1 or GlowXS2）
Remote control
Charging cable
User manual
Wireless
Play time
Charge time
Battery
Output RMS
Wireless range
up to 18 hours
up to 10 hours
4400 mAh Li-ion
5 W
up to 10 m

Functions(1)
A. Power/Light/Pairing
B. DC input
C. LED indicator

Functions(2)
 Brightness up
 Brightness down
 Lights ON⁄OFF
 Red
 Green
 Blue
 Purple
 Yellow
 Cyan
 Candle Orange
 While
 Skip manually
between the
dierent colors
 Previous track
 Next track
 Play⁄Pause
 Volume down
 Volume up
 Wireless
 Pairing
 Flash
 Strobe
 Fade
 Smooth
 The light will
follow the rhythm
of the music

Before the rst use
Connect the speaker to the mains during charging the red indicator
will be on The red indicator will extinguish to indicate that the speaker
is fully charged
Deep sleep mode to save battery energy
Power on and keep light o press and hold the power button until red light
ashing You need to press power button to turn on the speaker You can’t turn on
the speaker by remote in deep sleep mode
Speaker will enter to seep sleep mode if it is not used for days
Note: Charging time will take up to hours to complete When fully charged you
can then use the speaker without the mains power adaptor
Note: If your device requests a password enter ’’
Note: Refer to your device’s user manual for instructions on pairing and connect-
ing Bluetooth devices






Wireless setup
Press and hold the power A button on the speaker for second
The LED indicator C will ash blue quickly
Using the controls on your Wireless device select the ‘GlowXP’ ⁄ ‘GlowXS’ in
your Bluetooth settings to pair
When connected the speaker’s LED indicator C will turn solid blue
With the speaker turned o:
Pairing a wireless device for the rst time





Note: Track control functions from the buttons on the speaker and remote will
require your device to have Buletooth prole AVRCP Please check your device’s
manual if unsure
Re-pairing or pairing new devices
Turn o the wireless on any previously paired device
Enter to force paring mode by press paring button to pair another wireless


Using Wireless
Follow the instructions in the ‘Pairing a Bluetooth device’ section
Use the controls on your device to select a track
To play or pause the selected track use the controls on your device or press the
Play⁄Pause button 
To skip a track use the controls on your device or press the Previous Track
button  or Next Track button 
Audio played through the connected Bluetooth device will now be heard
through the speakers
The volume can be adjusted on both your device and the speaker To change
the volume on the speaker press the Volume   and Volume +  buttons
Playing audio wireless







Change the brightness of the light
Brightness up button  to increase the brightness
Brightness down button  to decrease the brightness


Controlling the lights
Red button 
Green button 
Blue button 
Purple button 
Yellow button 
Cyan button 
Candle orange button 
White button 
Cycle colour button 
The speaker has many dierent settings for the lighting eects They can be used
whilst the speaker is turned on or o Press don’t hold the Power button A to turn
the lights on or o you can also press the light ON⁄OFF button  on the remote
Once the light is on you can:









Press the :

●
●
●
●
Change the eects
Flash button  and the lights will ash through all the dierent colours
automatically
Strobe button  for the lights to strobe on and o You can change the colour
then press the Strobe button  to strobe dierent colours
Fade button  for the lights to fade in and out
Smooth button  for the lights to smoothly change
Music Lights button  for the lights to change to the beat of the music When
the speaker is not detecting the music it will automatically switch to Smooth
mode When the music is detected it will automatically start ashing the lights
in time to the music providing the Music Light button  was the last button to
be pressed
Press the:
Care for your speaker
Get the speaker wet
Drop the speaker as this will invalidate your warranty
Open up the speaker as there are no user serviceable parts inside
Expose the speaker to extreme temperatures or rapid changes of hot to cold or
vice versa
Please DON’T:
●Clean the speaker with a soft dry cloth and no detergents
Please DO:






For more information, please visit: www.P65Warnings.ca.gov
WARNING: This product contains chemicals, including lead or lead compounds,
that are known to the State of California to cause cancer, and birth defects or
other reproductive harm.
ADVERTENCIA: Este producto contiene sustancias químicas, incluyendo plomo
o compuestos de plomo, que son reconocidos por el Estado de California que
provocan cáncer, defectos de nacimiento u otros daños reproductivos.
California Proposition 65 Warning