Nyne Aqua Instruction manual

Charge the speaker until the red
power indicator turns off.
Tip: If the power indicator ashes red
quickly, it indicates that the battery
is low and needs to be recharged.
Press and hold until the Bluetooth
indicator ashes blue.
+For rst-time use, the Bluetooth indicator
ashes blue quickly, indicating that
the speaker is in pairing mode.
Tip: When you power on the speaker
again after Bluetooth setup, the speaker
will search for the paired device and the
Bluetooth indicator will ash slowly. If no
paired device is found, it will ash quickly
and the speaker will enter pairing mode.
nyne.com
CS
Přenosného reproduktoru
Bluetooth
ET
Kaasaskantav Bluetooth kõlar
GE
für einen portablen
Bluetooth-Lautsprecher
HU
Rövidített használati útmutató
LV
Pārnēsājams Bluetooth
skaļrunis
CS
Stručná příručka uživatele
ET
Lühike kasutusjuhend
GE
verkürztes Benutzerhandbuch
HU
Hordozható Bluetooth
hangszóró
LV
Saīsināta Lietotāja
Rokasgrāmata
LT Garsiakalbio vartotojo vadovas
PL Przenośnego głośnika
Bluetooth
RO Difuzor portabil Bluetooth
SK Prenosného
reproduktoraBluetooth
LT Sutrumpintas nešiojamojo
bluetooth
PL Skrócony Przewodnik
Użytkownika
RO Ghid de referinţă rapidă
SK Stručná príručka užívateľa
Aqua 2
1
1 Make sure that the speaker is in pairing mode.
2 Enable Bluetooth on your device to
be paired with the speaker.
3 Select ‘NYNE AQUA’ from the available devices
(enter the password ‘0000’ if necessary) to start
pairing and connection with the speaker.
4 After successful connection, the Bluetooth
indicator turns solid blue and the speaker beeps.
Tip: This speaker supports automatic
connection with a previously paired device
after power-off and power-on again.
You can press and hold for more
than 2 seconds to enter manual pairing
mode. In this way, you can pair the
speaker with a new Bluetooth device.
You can press and hold both +/- for more than
5 seconds to clear all paired Bluetooth devices.
This speaker is compatible with the voice
assistant on your smart device.
NYNE AQUA
NYNE Aqua_Quick User Guide_20140623.indd 1-6 2014/6/23 20:10:46

1 Connect an auxiliary audio
device to the speaker through the
supplied 3.5mm audio cable.
2 Play and control music on the audio
device, and use +/- on the speaker
to adjust volume if necessary.
Tips: In AUX IN mode, you can press
to mute sound output from the speaker.
When the 3.5mm audio cable is plugged
in, the speaker switches to AUX IN mode
automatically. When it is unplugged, the
speaker switches back to Bluetooth mode.
The button also functions in AUX IN mode.
The voice assistant function does
not work in AUX IN mode.
In case of abnormality, you can hold
the RESET button to reset the speaker.
Play music on your device paired
and connected with the speaker.
Note: This speaker supports automatic
connection with a previously paired device
after power-off and power-on again.
During music play:
• Press +/- to adjust volume.
• Press and hold +/- to skip to
the previous or next song.
• Press to pause or resume music play.
• Press to select your favorite preset
sound effect: FLAT, ROCK, POP or JAZZ.
• Press and hold for more than 3
seconds to return to FLAT at any time.
+The Bluetooth indicator ashes
blue once when you select a
sound effect other than FLAT.
+The Bluetooth indicator ashes blue
twice when you select FLAT.
All registered and unregistered trademarks are
property of their respective owners.
Nyne Multimedia Inc.
All rights reserved.
QUG-Aqua-06-23-2014-V1.0
When you make a call or there is
an incoming call, you can use the
speaker as a speaker phone.
• When there is an incoming call, you
can press to receive the call or
press twice to reject the call.
• During a call, you can press to end the call.
• In BT mode, you can press twice to access
the voice assistant on your smart device. To
exit the voice assistant, press twice again.
Tips: Music play is paused during a call and
resumed automatically when the call ends.
You can press and hold to disconnect
the current Bluetooth connection.
If no source is detected, the
button does not function.
21
NYNE Aqua_Quick User Guide_20140623.indd 7-12 2014/6/23 20:10:50