O'jump 681 User manual

18/01/2021
1
N°292
(UK) Assembly Instructions
LOW EAM 3 & 5m
Réf : 681 & 682

18/01/2021
2
Thank you for buying this product O'jump. We advise you to read the assembly instructions
carefully. The apparatus is presented in pre-assembled parts for a simplified assembly. We
have designed this O'jump product to bring you complete satisfaction. If you need help, the
O'jump team is at your disposal to accompany you.
Warning:
This equipment must only be used by one person at a time and under the supervision of a
qualified individual, with appropriate landing mats.
Using this equipment for purposes other than those originally intended is prohibited.
Recommendations:
- keep these instructions for subsequent reference (inspection, maintenance, etc.).
- periodically carry out predictive maintenance.
- depending on how much it is used, have the equipment serviced yearly or every few years.
Footprint and weight:
-Apparatus :
Réf : 681. 300 x 60 x 39cm (Lxlxh) 47Kg
Réf : 682. 500 x 60 x 39cm (Lxlxh) 72Kg

18/01/2021
3
Tools needed to assemble the apparatus .
Hardware listing (pre-assembled)
Hex wrench N°18/19
Ø24x13
X
4
X4
E
M12
X4
A
M12 x 45
X4
C
M12
F
X
4
D
X
4
M12 x 35

18/01/2021
4
List of parts (pre-assembled )
1 Package 681/00 Pair of legs and feet Weight 10Kg
eam body according to model
1 package 681/10 Length 3m 37Kg
1 package 682/00 Length 5m 62Kg

18/01/2021
5
Assembling 1
st
Leg
Put the beam body upside down on the floor and put in place the leg
Position the leg
at
580 ± 5mm from
the edge, then tighten the nuts Ref E
Hex wrench N °18/19

18/01/2021
6
Assembling 2
nd
Leg
1) Repeat the operation on page 5
Hex wrench N °18/19