odass OD-0910 User manual

Installation
manual
towel warmer
Model OD-0910
SPECIFICATION
Voltage: AC120V Frequency: 60Hz
Rated power: 100 W (OD-0910-SS, OD-0910-BR) 135 W (OD-0910-MB)
Unit size: 870 X 530 mm
This towel warmer is intended for the use in bathrooms or laundry areas. Read the instruc-
tions carefully before operating.
Please read the wall-mounted instal-
lation carefully to understand how to
install on your ideal location of the
wall.
Please use the services of a certied
electrician for the apparent wireless
installation of this product.
Make sure to complete the installa-
tion before using it.
Plug the power cord into an electrical
outlet for the apparent wire installa-
tion.
Switch ON/OFF : Press button ON/
OFF, product will start to work, if you
want to stop it, press the button
again.
The timer can be adjusted to 2 h
(hour) or 4 h (hour). Press the button
to select the right time.
Please turn it off and take the plug
out from the outlet if you are not
using it.
Hardwire installation
1 3+18 3+1 4 8 1 12 1
Client
TOLERANCES
FINI DE SURFACE : 125
PROJECTION :
± 1/16"
± .01"
± .003"
± .0005"
1/X
.XX
.XXX
.XXXX ± 1°
ANGLE
SAUF CONTRE INDICATION, LES
DIMENSIONS SONT EN POUCES.
C:\dessin classé compagnie\Odass\round tube.asm
Asn Machinerie inc
82 St-Joseph Sud
Rivière-Bleue qc
Canada G0L-2B0
www.asnmachinerie.com
[e-mail]
tel:[phone] fax:[phone]
cell:418-714-1829
round tube ASM.dft
CLI ENT
DATE DESSINÉE
DESSINÉ PAR
NOM
ÉCHELLEPAGE REV
CE DOCUMENT EST LA
PROPRIÉTÉ DE
Asn
Machinerie inc
IL NE DOIT
PAS ÊTRE DÉVOILÉ, UTILISÉ
OU REPRODUIT EN TOUT OU
EN PARTIES SANS
L'AUTORISATION ÉCRITE DE .
Asn Machinerie inc
21-02-2020
1 de 1 N/A
emplacement
70.00 mm
115.00 mm
84.00 mm
bolt
wire hole
92.00 mm
#6-32 screw
0.75" long

Plug-in
installation
instruction
1. Identify the location
of the holes needed for the screws on the wall.
2. Drill holes in the wall.
4. Rivet the base onto the nut with
the xing screw.
6. The power cable should exit at
the rear of the product.
7. Press the button to turn it on
or off, select on the timer
2 or 4 hours.
3. Insert screw anchor into the
holes.
5. Install the base with the screw.

Hardwire
installation
instruction
2. Drill holes in the wall.
4. Cut the supply cable. Make sure to keep enough wire to go through the
tube and to plug into the junction box.
5. Pass the supply cable through the tube provided for this
purpose and pass the wire through the plate.
6. Remove the tube already
present on the towel warmer
and replace it with the tube
available in the box provided
for hard-wired installation. Rivet
the base onto the nut with the
xing screw.
7. The supply cable should exit
from the rear of the product.
3. Insert screw anchor
into the holes.
8 Connect the supply cable to the
junction box and aim the plate
in the junction box.
1. Identify the location of the holes needed
for the screws on the wall.

9. Install the base with the
screws.
10. Press the button to turn it
on or off, select on the timer
2 or 4 hours.

IMPORTANT SAFEGUARDS
Read all instructions before using this heater.
Extreme caution is necessary when towel warmer is
used by or near children or persons with reduced
physical, sensory or mental capabilities and
whenever the heater is left operating unattended.
The device is designed only for drying textile
washed in water.
The heater should be installed at a minimal distance
of 0,6 meter of a bathtub or a shower.
If the supply cable is damaged, it should be
replaced by the manufacturer, manufacturing agent
or any qualied person to avoid potential dangers.
Always unplug heater when not in use.
Do not operate the heater with a damaged cord or
plug or if the heater has malfunctions, has been
dropped or damaged in any manner.
Return heater to authorized service facility for
examination, electrical or mechanical adjustment,
or repair.
Do not use outdoors.
Never place the heater where it may fall into a
bathtub or other water containers.
Do not run cord under carpeting. Do not cover
cord with throw rugs, runners, or the like. Place the
cord away from trafc area and where it will not be
tripped over.
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an
electric shock, re or damage the heater.
Do not use it in area where gasoline, paints, or
ammable liquids can be found.
Use this heater only as described in this manual.
Any other use is not recommended by the manu-
facture.It may cause re, electric shock, or injury to
persons.
Keep these instructions for later reference.
CAUTION:
THIS HEATER ONLY OPERATES IN UPRIGHT
POSITION.
STORE THE HEATER IN COOL and DRY LOCA-
TION WHEN NOT IN USE.
DO NOT STORE UNTIL THE HEATER HAS
COOLED DOWN.
ANY OTHER SERVICING SHOULD BE PERFOMED
BY AN AUTHORIZED SERVICE REPERSENTATIVE
THE HEATER MUST NOT BE LOCATED IMMEDIA-
TELY BELOW A SOCKET-
OUTLET.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of this appliance
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the appliance.
PRODUCT MAINTENANCE
To keep the device clean, regular maintenance is
suggested.
To remove dust, use a soft cloth.
To remove a stain, dampen the cloth. For better ef-
ciency of the device, it is advisable to remove dust
and foams which can accumulate regularly. Never
use abrasive or acetone-based products.
LIMITED WARRANTIES
Odass warrants the product to be free from defects
in workmanship from the date of purchase. These
warranties extend only to the original owner/end-
user for personal household use and start from the
date of purchase/billing.This warranty cannot be
transferred to a third party and additional limitations
apply for commercial uses. In the eventuality that a
ma-nufacturing defect appears, the owner/ enduser
must have in his possession, a proof of purchase
as well as a proof of installation by a professional
recognized by the construction industry.Odass
reserves the right to inspect on site, the defect by a
repre-sentative of is choice. Any return of goods will
not be accepted without the written authorization
from Odass. Odass cannot be held responsible
about the defects or breakingresulting from any act
of god, accident, catastrophe, abuse, negli-gence,
improper installation/use/maintenance, intensive
variation of temperature, exposures to chemicals
or stains caused by diffe-rents types of water
such as ferrous or alkaline water, etc.The use of
abrasives of any kind, gritting scraper, brushes
or any other scouring object which can damage
the surface of the pro-duct is to be proscribe and
will cancel the present warranty. Odass will be
repaired or replaced (with a product of equal value)
to her discression of any product reported to the
authorized dealer or to Odass as being defective
within the warranty period. Neither the distributor,
authorized Odass dealer nor any other person has
been authorized to make any afrmation, repre-
sentation or warranty other than those contained
in the warranty; any afrmation, repre-sentation or
warranty other than those contained in this warranty
shall not be enforceable against Odass or any
other person.This warranty excludes any expenses
related to shipping, handling and/or installation
fees. Odass cannot be held responsible for the fees
of labor, wastes of time, expenses of sundries or
replacement of installation material, including, but
not limited to, tiles, marble, etc.Odass reserves the
right to modify this warranty at any time, it being
understood that such modication will not alter the
warranty condi-tions applicable at the time of the
sale of the products in question.
LIMITED WARRANTIES
Odass guarantees the chrome and brushed nish
of stainless steel products for a limited lifetime
and a 5 years warranty on the matt black nish of
stainless steel products to be free from defects
in workmanship and materials under normal use
and service from the initial date of purchase by the
owner/end-user, contractor or builder.Odass gua-
rantees all material made of solid surface «I-stone»
for a limited lifetime to be free from defects in work-
manship and mate-rials under normal use and ser-
vice from the initial date of purchase by the owner/
end-user, contractor or builder.Odass warrants for
a period of 10 years, acrylic unit to be free from
defects in workmanship and materials under normal
use and service from the initial date of purchase by
the owner/end-user, contractor or builder.Odass
warrants for a period of 10 years, shower doors to
be free from defects in workmanship and materials
under normal use and service from the initial date
of purchase by the owner/end-user, contractor or
builder.Odass warrants for a period of 5 years, sa-
nitary porcelain products (toilet, lavatories basin) to
be free from defects in workmanship and materials
under normal use and
Entretiens-garantie limitées soient dans trois
colonnes comme les chauffe-serviettes. Toutes
mêmes grosseurs et même typo que les manuels
des chauffes-serviettes.
service from the initial date of pur-chase by the
owner/end-user, contractor or builder.Odass war-
rants for a period of 2 years, storage modules and
va-nities to be free from defects in workmanship
and materials under normal use and service from
the initial date of purchase by the owner/end-user,
contractor or builder.Odass warrants for a period
of 2 years, glass mirrors to be free from defects
in workmanship and materials under normal use
and service from the initial date of purchase by
the owner/end-user, contractor or builder.Odass
warrants for a period of 2 years, electrical com-
ponents to be free from defects in workmanship
and materials under normal use and service from
the initial date of purchase by the owner/end-user,
contractor or builder.