OEG 310 821 216 User manual

Feuchtigkeits- und Temperaturmessgerät
Bedienungsanleitung
Einleitung
Dieses digitale Feuchtigkeits- und Temperaturmessgerät zeichnet sich aus
durch schnelle Ansprechzeit und hohe Genauigkeit bei der Messung von
Temperatur und Luftfeuchtigkeit in der unmittelbaren Umgebung.
LC-Display
Bedienung
•Stromversorgung: Önen Sie das Batteriefach und legen Sie eine 9 Volt
Blockbatterie (CR-V9) oder einen entsprechenden Akku ein.
•Einschalten: Drücken Sie die Power-Taste, bis die Anzeigen auf dem
LC-Display erscheinen.
•Ausschalten: Drücken Sie die Power-Taste, bis die Anzeigen auf dem
LC-Display erlöschen.
•Batterieanzeige: Ein sichtbares Batteriesymbol zeigt an, dass die Batterie
bald entladen sein wird. Wenn das Symbol zusätzlich blinkt, sollte die
Batterie sofort ausgetauscht werden.
•Hintergrundbeleuchtung: Schalten Sie das Gerät ein und drücken Sie ein
weiteres Mal die Power-Taste, um die Hintergrundbeleuchtung zu aktivieren
bzw. zu deaktivieren. Die Hintergrundbeleuchtung schaltet sich selbst auto-
matisch ab, wenn das Gerät 30 Sekunden nicht bedient wird.
•Anzeigenwechsel °C / °F: Drücken Sie im ausgeschalteten Zustand zuerst
die Taste „MAX“ Im Ausstellmodus drücken Sie zunächst „MAX“ und halten
diese. Zusätzlich drücken Sie jetzt die Power-Taste und lassen dann beide
gleichzeitig los. So wechseln Sie von °C nach °F und zurück.
•Messung: Sobald das Gerät eingeschaltet ist, misst es automatisch Tem-
peratur und Luftfeuchtigkeit. Die aktuellen Werte sind auf dem Display
ablesbar. Um einen Wert in der Anzeige zu speichern, drücken Sie einmal
kurz „MAX“, im Display erscheint „HOLD“. Der Wert ist nun in der Anzeige
„eingefroren“ und bleibt solange sichtbar, bis Sie wieder kurz „MAX“ drü-
cken und der dann aktuelle Wert angezeigt wird.
•Min- / Max-Werte: Drücken Sie die Taste „MAX“ für mehr als eine Sekunde.
Ihnen wird nun der höchste Messwert angezeigt. Erneutes kurzes Drücken
der Taste „MAX“ zeigt den niedrigsten Messwert an. Um diesen Modus
wieder zu verlassen, drücken Sie „MAX“ erneut für mehr als eine Sekunde.
Parameter
Abmessungen (H x B x T): 152 x 52,5 x 35,5 mm
Anmerkungen
Reinigen Sie das Gerät nur mit einem Tuch, ohne Lösungsmittel
oder Flüssigkeit.
Entfernen Sie die Batterie, wenn das Gerät voraussichtlich länger
nicht im Gebrauch sein wird.
www.oeg.net
Feuchtigkeits- und
Temperaturmessgerät
Bedienungsanleitung
D
Humidity and
temperature meter
Instruction manual
GB
Humidity & Temperature Meter
Instruction Manual
lntroduction
LCDdisplay
Operation
Humidity & Temperature Meter
This digital humidity and temperature meter features high
precision, quick response and high stability, can measure the
temperature and humidity of the local environment for further
analysis.
This unit has been widely applied in household, intelligent
estate, subway, shopping mall for process control.
low battery
humidity icon
°C/°Ftemperature unit
humidity reading
temperature reading
hold-on icon
high/low temperature icon
MIN/MAX reading
1.Open the battery door and insert the battery(006 or NEDA1604 or
IEC6F22)
Turn on: press the power button for about 1 second until the full
display appears on the LCD.
Turn off: press the power button for 3 seconds above until all the
display disappears on the LCD.
Battery icon: indicating 3 status of battery, when the battery is full
the icon displays, and icon indicating the battery is about to
be exhausted, the icon flashing indicating the battery must be
replaced immediately.
Backlight: turn the power on and press the power once to activate
or inactivate the backlight, and the backlight will turn off
automatically if there is no further operation for 30 seconds.
Press the MAX button
MAX/MIN:Press MAX for 3 seconds above, the MAX appears
on the LCD, then release the button to enter into MAX/MIN
measure mode; under this mode, press once this button to show
the MIN for the minimum reading measured. Press the button
2.
3.
4.
5.
6.
for 3 seconds above to exit this mode.
7. unit conversion function:
Under shutdown mode, press "MAX" first, then press power
button while holding down "MAX".
°C/°F
humidity
temperature
：0%～100%RHrange
：92.7gweight
：sizes 152*35.5*52.5mm
：-30℃～70℃range
0%～20%RH
-30℃～0℃
20%～80%RH
0℃～70℃
-22℉～32℉
32℉～158℉
80%～100%RH
4.5%
1.0℃
3.0%
0.5℃
0.1
0.1
/0.2℉
℃
4.5%
1.8℉
0.9℉
precision
precision
range
range
resolution
resolution
Parameters
Notes
1.
2.
3.
4.
This product has been calibrated before loading, do not change
the parameters without the presence of professionals and
equipment.
Amendment and maintenance must be kept by professionals
not just doing it with reference to the manual.
Clean the unit with cloth only without any solvent or liquid.
Take out the battery if the unit is expect not to be used.
!Specific Declarations:
Our company shall hold no any responisibility resulting from using
output from this product as an direct or indirect evidence.
We reserves the right to modify product design and specification
without notice.
Humidity & Temperature Meter
Instruction Manual
lntroduction
LCDdisplay
Operation
Humidity & Temperature Meter
This digital humidity and temperature meter features high
precision, quick response and high stability, can measure the
temperature and humidity of the local environment for further
analysis.
This unit has been widely applied in household, intelligent
estate, subway, shopping mall for process control.
low battery
humidity icon
°C/°Ftemperature unit
humidity reading
temperature reading
hold-on icon
high/low temperature icon
MIN/MAX reading
1.Open the battery door and insert the battery(006 or NEDA1604 or
IEC6F22)
Turn on: press the power button for about 1 second until the full
display appears on the LCD.
Turn off: press the power button for 3 seconds above until all the
display disappears on the LCD.
Battery icon: indicating 3 status of battery, when the battery is full
the icon displays, and icon indicating the battery is about to
be exhausted, the icon flashing indicating the battery must be
replaced immediately.
Backlight: turn the power on and press the power once to activate
or inactivate the backlight, and the backlight will turn off
automatically if there is no further operation for 30 seconds.
Press the MAX button
MAX/MIN:Press MAX for 3 seconds above, the MAX appears
on the LCD, then release the button to enter into MAX/MIN
measure mode; under this mode, press once this button to show
the MIN for the minimum reading measured. Press the button
2.
3.
4.
5.
6.
for 3 seconds above to exit this mode.
7. unit conversion function:
Under shutdown mode, press "MAX" first, then press power
button while holding down "MAX".
°C/°F
humidity
temperature
：0%～100%RHrange
：92.7gweight
：sizes 152*35.5*52.5mm
：-30℃～70℃range
0%～20%RH
-30℃～0℃
20%～80%RH
0℃～70℃
-22℉～32℉
32℉～158℉
80%～100%RH
4.5%
1.0℃
3.0%
0.5℃
0.1
0.1
/0.2℉
℃
4.5%
1.8℉
0.9℉
precision
precision
range
range
resolution
resolution
Parameters
Notes
1.
2.
3.
4.
This product has been calibrated before loading, do not change
the parameters without the presence of professionals and
equipment.
Amendment and maintenance must be kept by professionals
not just doing it with reference to the manual.
Clean the unit with cloth only without any solvent or liquid.
Take out the battery if the unit is expect not to be used.
!Specific Declarations:
Our company shall hold no any responisibility resulting from using
output from this product as an direct or indirect evidence.
We reserves the right to modify product design and specification
without notice.
Batterieanzeige
MIN-/MAX-Werte
Feuchtigkeitseinheit RH
Feuchtigkeitswert in %
Temperatureinheit (°C / °F)
Temperaturwert
Hold-Funktion aktiv
Symbol für hohe/
niedrige Temperatur
Temperatur
Messbereich: -30 bis 70 °C
Messbereich Auösung Genauigkeit
-30 bis 0 °C
0,1 °C / 0,2 °F
1,0 °C
0 bis 70 °C 0,5 °C
-22 bis 32 °F 1,8 °F
32 bis 158 °F 0,9 °F
Feuchtigkeit
Messbereich: 0 bis 100 % RH
Messbereich Auösung Genauigkeit
0 bis 20 % RH
0,1 %
4,5 %
20 bis 80 % RH 3,0 %
80 bis 100 % RH 4,5 %
310 821 216

lntroduction
This digital humidity and temperature meter is characterised by its quick
response time and high precision when measuring the temperature and air
humidity in the direct environment.
LC display
Operation
• Power supply: Open the battery compartment and insert a 9 Volt
monobloc battery (CR-V9) or a corresponding rechargeable battery.
• Turn on: Hold the power button until the full display appears on the LCD.
• Turn o: Hold the power button until the display disappears from the LCD.
• Battery icon: A visible battery icon indicates the battery is about to be
exhausted. If the icon is also ashing, the battery should be replaced
immediately.
• Backlight: Turn on the device and press the power button again to activate
or deactivate the backlight. The backlight will turn o automatically if there
is no further operation for 30 minutes.
• Display change °C / °F: In shutdown mode, press “MAX” rst, and while
holding the button, press the power button additionally. Then release both
simultaneously. This is how you can switch from °C to °F and vice versa.
• Measurement: As soon as the meter has been turned on, it measures the
temperature and air humidity automatically. The actual values can be read
o the display. In order to save a reading in the display, briey press “MAX”.
“HOLD” appears on the display. The reading is now “frozen” on the display
and remains visible until you press “MAX” again briey and the actual
reading is displayed then.
• MIN- / MAX-values: Press the “MAX” button for more than a second.
The highest measured value is displayed now. Another brief pressing of the
“MAX” button indicates the lowest measured value. In order to leave this
mode, press “MAX” again and hold the button for more than a second.
Parameter
Dimensions (H x W x D): 152 x 52.5 x 35.5 mm
Notes
Clean the instrument with a cloth only. Do not use any solvents or liquids.
Remove the battery if the instrument is expected not to be in use for a
longer time.
OEG GmbH
Industriestraße 1 • D-31840 Hess. Oldendorf
[e-mail] • www.oeg.net
Kostenfreie Bestell- und Service-Hotline:
Fon 0800 6 343662 • Fax [phone]
D
Free service number:
Phone [phone] • Fax [phone]
GB
10196720
Humidity & Temperature Meter
Instruction Manual
lntroduction
LCDdisplay
Operation
Humidity & Temperature Meter
This digital humidity and temperature meter features high
precision, quick response and high stability, can measure the
temperature and humidity of the local environment for further
analysis.
This unit has been widely applied in household, intelligent
estate, subway, shopping mall for process control.
low battery
humidity icon
°C/°Ftemperature unit
humidity reading
temperature reading
hold-on icon
high/low temperature icon
MIN/MAX reading
1.Open the battery door and insert the battery(006 or NEDA1604 or
IEC6F22)
Turn on: press the power button for about 1 second until the full
display appears on the LCD.
Turn off: press the power button for 3 seconds above until all the
display disappears on the LCD.
Battery icon: indicating 3 status of battery, when the battery is full
the icon displays, and icon indicating the battery is about to
be exhausted, the icon flashing indicating the battery must be
replaced immediately.
Backlight: turn the power on and press the power once to activate
or inactivate the backlight, and the backlight will turn off
automatically if there is no further operation for 30 seconds.
Press the MAX button
MAX/MIN:Press MAX for 3 seconds above, the MAX appears
on the LCD, then release the button to enter into MAX/MIN
measure mode; under this mode, press once this button to show
the MIN for the minimum reading measured. Press the button
2.
3.
4.
5.
6.
for 3 seconds above to exit this mode.
7. unit conversion function:
Under shutdown mode, press "MAX" first, then press power
button while holding down "MAX".
°C/°F
humidity
temperature
：0%～100%RHrange
：92.7gweight
：sizes 152*35.5*52.5mm
：-30℃～70℃range
0%～20%RH
-30℃～0℃
20%～80%RH
0℃～70℃
-22℉～32℉
32℉～158℉
80%～100%RH
4.5%
1.0℃
3.0%
0.5℃
0.1
0.1
/0.2℉
℃
4.5%
1.8℉
0.9℉
precision
precision
range
range
resolution
resolution
Parameters
Notes
1.
2.
3.
4.
This product has been calibrated before loading, do not change
the parameters without the presence of professionals and
equipment.
Amendment and maintenance must be kept by professionals
not just doing it with reference to the manual.
Clean the unit with cloth only without any solvent or liquid.
Take out the battery if the unit is expect not to be used.
!Specific Declarations:
Our company shall hold no any responisibility resulting from using
output from this product as an direct or indirect evidence.
We reserves the right to modify product design and specification
without notice.
battery status indication
MIN/MAX values
humidity unit RH
humidity value in %
temperature unit (°C / °F)
temperature value
hold function active
icon for high /
low temperature
Temperature
Messbereich: -30 up to 70 °C
Humidity Resolution Accuracy
-30 up to 0 °C
0.1 °C / 0.2 °F
1.0 °C
0 up to 70 °C 0.5 °C
-22 up to 32 °F 1.8 °F
32 up to 158 °F 0.9 °F
Parameters
Humidity: 0 up to 100 % RH
Humidity Resolution Accuracy
0 up to 20 % RH
0.1 %
4.5 %
20 up to 80 % RH 3.0 %
80 up to 100 % RH 4.5 %