OEM Tools OEM24875 Service manual

WARNING
The following safety information is provided as a guideline to help you operate your Tilt Barrel Fan under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your Tilt Barrel Fan. Failure to follow instructions listed below may result in serious injury. In addition, make sure that
anyone who uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING:Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES:Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS®Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. This product is designed for certain applications only. OEMTOOLS®cannot be responsible
for issues arising from modification. We strongly recommend that this product is not modified and/or used for any application
other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
product until you have first contacted customer service to determine if it can or should be performed on the product.
WARNING:Pursuant to California Proposition 65, this product contains chemicals known to the state of California to
cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Operating Instructions and Parts Manual OEM24875
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself
and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain instructions for future reference.
1
5/20
2020 OEMTOOLS®
36" TILT BARREL FAN
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
[email protected]
UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with the carrier.
DO NOT use the OEMTOOLS®36" Tilt Barrel Fan Manual
if broken, cracked or damaged parts (including labels)
are noted. Any fan that appears damaged in any way,
operates abnormally, or is missing parts should be
removed from service immediately. If you suspect that
the fan was subjected to shock load (a load that was
dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.

2
Operating Instructions and Parts Manual OEM24875
5/20
2020 OEMTOOLS®
36" TILT BARREL FAN
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn
the product’s applications and limitations, as well
as potential hazards specific to it. The use of this
product is simple and straightforward if you follow the
instructions. When operating this product, use common
sense and only use this product for its intended
purpose.
2. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS®for a replacement.
3. Maintain this product with care. Keep it dry and clean –
and free from brake fluid, oil, and grease (if applicable).
4. Check for damage. Check your product regularly. If
part of the product is damaged, it should be carefully
inspected to make sure that it can perform its intended
function correctly. If in doubt, the part should be
repaired. Refer all servicing to a qualified technician.
Consult your dealer for advice.
5. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the product’s operation.
6. DO NOT use a damaged product. Tag damaged
products "DO NOT USE" until repaired. If damaged,
have the product serviced before using. Many
accidents are caused by poorly maintained products.
7. Service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could create a risk of injury.
8. When servicing a product, use only identical
replacement parts. Use of unauthorized parts or failure
to follow maintenance instructions could create a risk
of injury.
9. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one product may become hazardous when
used on another product.
10. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
11. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. DO NOT use this
product in a damp or wet location.
12. Keep children away from the work area. Never
let a child handle this product without strict adult
supervision.
13. Store this product out of the reach of children and
untrained persons. This product may be dangerous in
the hands of untrained users.
14. DO NOT operate this product if under the influence of
alcohol or drugs. Read warning labels on prescriptions
to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, DO NOT
attempt to operate.
15. Use safety equipment. Eye protection should be worn
at all times when operating this product. Use ANSI
approved safety glasses. Everyday eyeglasses are NOT
safety glasses. Dust mask, non-skid safety shoes, hard
hat or hearing protection should be used in appropriate
conditions.
16. Wear proper apparel. Loose clothing, gloves, neck-ties,
rings, bracelets or other jewelry may present a potential
hazard when operating this product. Keep all apparel
clear of the product.
17. DO NOT overreach. Keep proper footing and balance
at all times when operating this product.
18. Keep away from flammables. DO NOT attempt to
operate this product near flammable materials or
combustibles. Failure to comply may cause serious
injury or death.
19. Avoid accidental fire and/or explosion. DO NOT smoke
near engine fuel and battery components.
20. We believe the information contained herein to be
reliable. However, general technical information is given
by us without charge and the user shall employ such
information at their own discretion and risk. We assume
no responsibility for results or damages incurred from
the use of such information in whole or in part. Always
refer to specific instructions and technical information
supplied by vehicle manufacturer.
21. The manufacturer declines any and all responsibility
for property damage or injury if said damage is the
result of unskillful handling by the operator or of
failure to observe the basic safety rules set forth in the
instruction manual.
22. The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator must
understand that common sense and caution are factors
which cannot be built into this product, but must be
supplied by the operator.
PRODUCT DESCRIPTION
The OEMTOOLS®36" Tilt Barrel Fan helps circulate the
air and keep it in motion while maintaining a fresh breeze.
It also helps to prevent the inhalation of dangerous gas
and fumes by adding ventilation.

3
Operating Instructions and Parts Manual OEM24875
5/20
2020 OEMTOOLS®
36" TILT BARREL FAN
SPECIFIC SAFETY INSTRUCTIONS
AND WARNINGS
Thoroughly read and understand all instructions in this
product manual before using this product. Failure to
follow all instructions listed below may result in electric
shock, fire, and/or serious personal injury.
WARNING
1. Unplug the fan before moving it or performing
maintenance. DO NOT touch the fan when your hands
are wet.
2. Those who are not qualified electricians should not
disassemble, repair or rebuild the fan.
3. Unplug the fan when it is not in use.
4. DO NOT unplug the fan by holding the cable cord.
Unplug by holding the plug.
5. DO NOT use the fan when there is damage to the cable
cord or plug.
6. Avoid the use of extension cords when possible.
Ensure that they are UL listed if they must be used.
DO NOT use a single extension cord to operate more
than one fan. DO NOT plug the fan into any other
cord-connected device (power strip, surge protector,
multiple outlet adapters etc.).
7. DO NOT use the fan close to any fire or heat source.
8. DO NOT insert your hand or other objects into the
guard or the movable parts.
9. To reduce the risk of fire or electric shock, DO NOT use
this fan with any solid-state speed control device.
10. DO NOT use this fan outdoors.
11. DO NOT operate any fan with a damaged cord or plug.
Discard fan or return it to an authorized service facility
for examination and/or repair.
12. DO NOT run cord under carpeting. DO NOT cover cord
with throw rugs, runners, or similar coverings. DO NOT
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
13. DO NOT use if electrical cord is frayed or bent.
CAUTION
14. DO NOT immerse the fan.
15. Fit the guard onto fan before starting up the fan.
16. This fan is not intended for use by people (including
children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge
unless they have been given supervision or instructions
concerning use of the fan by a person responsible for
their safety. Supervise children to ensure they do not
play with the fan.
17. Always place the fan on a stable, flat, level surface
when operating, to avoid the chance of the fan
overturning.
18. DO NOT immerse fan in water.
OPERATING INSTRUCTIONS
1. The fan comes with two different speeds.
2. Switch the fan ON by turning the knob to speed 1 or 2.
3. To switch the fan OFF, turn the switch knob to 0.
4. Before operating, assemble the wheel according to the
instruction of wheel assembly drawing.
WARNING: DO NOT depend on the ON-OFF switch
as the sole means of discontinuing power when installing
or servicing the fan. Always unplug the power cord.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. DO NOT use any
water for cleaning metal surfaces. Using a soft cloth, wipe
off the surfaces of the fan. To clean dust off the grill, use a
vacuum cleaner or take off the front grill by removing the
securing screw on the edge of the grill with a screwdriver.
After cleaning, remount the grill and fasten the securing
screws on the edge of the grill.
WHEEL ASSEMBLY
Product assembly drawing
Wheel assembly drawing
Picture 2
Picture 1
1
23
10 4 5 7 9 8
6
7
7
11 12 13
1 14 15
2
9
354
6
8
7
17
16
10
1. Remove the wheels from packing, then press and fold
the packing.
2. Put the Folded Packing (5) under the Square Tube (4) to
hold up the Tilt Barrel Fan (picture 1).
3. Put the Wheel Shafts (3 and 8) into the two Holes (9
and 10). Line up the Holes on the Wheel Shafts and
then insert the Split Pin (7) (picture 2).
4. Spl it the Split Pin (7) to avoid the Split Pin coming loose.
DISPOSAL
At the end of the useful life of the OEMTOOLS®36" Tilt
Barrel Fan, dispose of the components according to all
state, federal, and local regulations.

4
Operating Instructions and Parts Manual OEM24875
5/20
2020 OEMTOOLS®
36" TILT BARREL FAN
Figure Description Qty.
1 Tilt Barrel Body 1
2 Wheel 2
3 Wheel Shaft 1
4 Square Tube 1
5 Fold Packing 1
6 Bracket 1
7 Split Pin 1
8 Wheel Shaft 1
9 Hole 1
10 Hole 1
11 Logo 1
12 Front Guard 1
13 Blade 1
14 Motor 1
15 Switch Box 1
16 Rear Guard 1
17 Power Cord and Plug 1
PARTS LIST
3580 E. Raines Road, Suite 3, Memphis, TN 38118
Tel: [phone]
www.oem-tools.com
OEMTOOLS®90 DAY LIMITED WARRANTY
For up to 90 days from the original purchase of this OEMTOOLS®product, if you find any defect in material or workmanship (through normal
usage), return it to the place of purchase or to OEMTOOLS®for repair or replacement at our discretion. In order to obtain this service, send
your tool and proof of purchase (transportation pre-paid) to:
OEMTOOLS®Q.A. Dept., 3580 E. Raines Road #3, Memphis, TN 38118.
We will not be responsible for lost or damaged goods during transportation; please insure your package. If our inspection verifies the defect,
we will either repair or replace the product, or we may elect to refund the purchase price if we cannot readily and quickly provide you with a
replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes
not within the scope of our warranty, then you must bear the cost of returning the product.
OEMTOOLS®does not provide warranty for products labeled other than OEM®or OEMTOOLS®. OEMTOOLS®will not provide any warranty
for products subjected to abnormal use. Abnormal use includes (but is not limited to) abuse, accident, alteration, neglect, and unauthorized
or unreasonable use or repairs. This warranty does not cover bits, blades, files, batteries, or calibration. We recommend that you maintain
your tools and sharpen or replace blades, bits, files, and batteries as necessary. OEMTOOLS®reserves the right to make any changes in
construction or design at any time without any obligation in incorporating such changes to tools or equipment previously sold.
OEMTOOLS®makes every effort to ensure that its products meet high quality and durability standards and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does
not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal
activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. This warranty gives you specific legal rights, and you may
also have other rights, which vary from state to state.
Don’t forget to register your new OEMTOOLS®product at www.oem-tools.com.
CONTACT US
Product assembly drawing
Wheel assembly drawing
Picture 2
Picture 1
1
23
10 4 5 7 9 8
6
7
7
11 12 13
1 14 15
2
9
3
54
6
8
7
17
16
10
PRODUCT LAYOUT