OEM E-613 User manual

I-
E-613/623 Remote Control Training Collar User's Manual
Thank you for choosing our product!
Please read this manual carefully before using the product.
Please do read the Cautions, for fear that unwanted results arise from improper operation.
The product can confrol one or two receivers at the same time.
A Preparation before using:
1 The lithium batteries installed in the remote controller and the receiver can be recharged. Before using the product, check that
whether the electricity of the battery is enough or not. The display screen of the remote conholler can show the electricity of
the battery. If the indicator light of the receiver doesn't light or goes dim, it means that the electricity of the battery is not enough
,then you should use the appropriative charger to charge it.
Press the Obrtton on the left of the remote controller for about two seconds, the screen will light, repeat it again can turn offthe
power.
2 The remote controller has a power-saving feature, when you don't operate it in a long time, the display screen will be turned
offautomatically. It will be turned on again by pressing tte @ Uouoo.
3 When the remote controller is in a standby state, press the button shortly can choose the target ( A or B or A+B ) , when the
remote controllerjust control one receiver, you don t need to choose iL
4 The display screen of the remote controller can display the functions and the MENU.
5 When the display screen is lighg continue to press Ae @ button can enter the MENIJ, and it will exit the MENU by repeating
ita$in.
6 After entering the MENU, p,ress @ buton shortly can choose the firnction you want. When the function symbol is flashing,
,pgeqqJ$F.,,+.&gttp.ql1q,,l*qryq1e.or,{9sEa,ee1!s{_egry9ofthe-$r.....c.$o.,+.. ..,.. :.:::!
7 After having set all the functions , press the @ brtto, continuously, you *uy exit the MENU.
8 Press 6" ) button, the remote contoller will make the " B-B " sound.
9 The receiver has a power-saving feature, the power will be turned offautomatically without receiving orders in a long time or
in a long rest .
l0 When the receiver vibrates , the power indicator light installed in the receiver will light . If it doesn' t light or goes dim, it
means that the electricity of the battery is not enough , then you should use the appropriative charger to charge it.
11 Checking the receiver: Respectively press me ) l[l *a / bottom on the remote controller and the receiver will release
corresponding " B-B " sound, vibration or shock.
12 When testing the shock function of the receiver, you will heax a " pa-pa" sound from the receiver. When the testing bulb is
connected with the poles, it will light. The stronger of the shock, the faster of the flashing.
t: fne l[l ,, I of the collar is to curb the improper deeds of the pet. After each successful check, you should let the pet
know what should be done and what should not be done. After a number sf trsinings, the pet will understand what you like and
don't like.
14 Adjust the length of the collar to fit the neck of the pet. The proper tightress should be that you can insert a finger in between.
15 Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.
B Operational instructions:
1 Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar that you can insert
a finger in between.
2 Most pets feel uncomfortable at first wearing the collar. Don't use the I nntionat that time until you .pe sgre that the pet
has gotten used to the collar. fn" I is used to curb the improper deeds of the pet. Don't use it casually or to make fun of the
pet.
3 You can call your dog soundlessly by " l[l " i" a long distance, or you can use the " B-B " sound.

4 If you don't use this product, turn offthe power of the remote controller, so as to prolong the lifetime of the batteries.
5 There is a vibration sensor switch in the receiver , you just need to put it alone, then the power of it will be tumed offautomatically.
C How to charge the batteries: nlon coller
I The lithium batteries installed in the remote controller and the receiver can be
recharged. Please use the charger the product offers to charge it .
2 The display screen of the remote controller can show the electricity of the battery. If
the electricity ofthe battery is not enough, then you should charge it at once.
3 After the receiver is turned on, it is in a standby state. In the standby state, it only
consumes small amount of electricity. A frequent use of it will consume electricity
quickly. Therefore you should often check the batteries by watching the indicator light.
When the electricity of the batteries is not enough , please use the appropriative charger
to charge the batteries..
recerver
D Cautions: charging hole
I At first wearing this collar, some pets will feel uneasy. Give the pet some time to get
used to it. Don' t use the | function of this product until you are sure that the pet
has gotten used to it.
2 Digital audio transmitting technology is applied in the remote controller. Remote control signals can penetrate obstacles. It is
unnecessary for the remote controller to point directly at the receiver. However, obstacles will affect the valid distance of remote
controlling.
3. The valid distance of remote controlling means the straight-line distance between the remote conholler and the receiver without
obstacles in between- If there are interference signals or signal sslsening around, the actual remote control distance may be
shorten.
4 The product is used for training the pets. You should be patient when training the pets. Good effect can only be achieved by
lasting use of it.
5 The fflf and I of thereceiver is used to curb the improper deeds of the pets. Please be advised that don,t use them to make
fun of the pet.
6 Presently, this product is the most humane tool for pet training. Following the correct operational instructions, you can effectively
train the pet and bring it no harm.
7 Though the receiver is waterproof, you cannot immerse it into the water for a long time.
Lateral buckle
static electrode
power indicator light