Office Star Products BP-BNTV47-WF13 User manual

Item# BP-BNTV47-WF13
BENTON 47”TV CONSOLE
ASSEMBLY INSTRUCTIONS
IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE
To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.

LIMITED WarranTy
INSPIRED by Bassett®Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of
5 years. Defects and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event
beyond the control of INSPIRED by Bassett®is not covered. The warranty does not cover cosmetic damage that may result from normal
use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the
customer’s responsibility to prepay freight on any components returned to the factory. INSPIRED by Bassett®will pay return freight on
components covered under terms of warranty.
WarnInG
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.
Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through
Friday 8:00 a.m. - 5:00 p.m. Pacific Time.

PARTS LIST
PictureLabel Description Qty
1
2
3
Top Panel
Left Side Frame
Right Side Frame
1
1
1
4Back Panel 1
5Middle Shelf 1
6Partition Panel 1
7Bottom Panel 1
8Left Door 1
9Right Door 1
10 Adjustable Shelf 2

THANK YOU for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose
inside the carton during shipment. Identify and count all parts and compare with the parts and hardware lists.
Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through
Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
HARDWARE LIST
Shelf Support
NOTE: Phillips screwdriver also needed for assembly (not provided).

STEP 1:
Insert two Wooden Dowels (G) into Back Panel (4), attach Middle Shelf (5) to Back Panel (4) and secure using three Flat Washers (D), three Spring
Washers (E) and three Bolts (B). DO NOT FULLY TIGHTEN BOLTS (B).
STEP 2:
Insert two Wooden Dowels (G) into Left Side Frame (2). Attach Middle Shelf (5) and Bottom Panel (7) to Left Side Frame (2), secure Bottom
Panel (7) using two Bolts (A), secure Middle Shelf (5) using two Flat Washers (D), two Spring Washers (E) and two Bolts (B). DO NOT FULLY
TIGHTEN BOLTS (A & B).

STEP 3:
Insert two Wooden Dowels (G) into Right Side Frame (3). Attach Middle Shelf (5) and Bottom Panel (7) to Right Side Frame (3), secure Bottom
Panel (7) using two Bolts (A), secure Middle Shelf (5) using two Flat Washers (D), two Spring Washers (E) and two Bolts (B). DO NOT FULLY
TIGHTEN BOLTS (A & B).
STEP 4:
Further secure Left Side Frame (2) and Right Side Frame (3) to Back Panel (4) using four Bolts (C). DO NOT FULLY TIGHTEN BOLTS (C).

STEP 5:
Insert two Wooden Dowels (G) into edge of Partition Panel (6), secure Partition Panel (6) to Middle Shelf (5) using two Flat Washers (D), two Spring
Washers (E) and two Bolts (B). DO NOT FULLY TIGHTEN BOLTS (B).
STEP 6:
Attach one Handle (H) to front of both Left Door (8) and Right Door (9) using one Bolt (I) for each Handle (H). FULLY TIGHTEN BOLTS (I) USING
PHILLIPS SCREWDRIVER (not provided).

STEP 7:
Turn TV console assembly to the upright position and FULLY TIGHTEN ALL BOLTS USING WRENCH (F). Attach Left Door (8) and
Right Door (9) to front of assembly.
STEP 8:
Insert eight Wooden Dowels (G) into top of assembly. Attach Top Panel (1) to assembly and secure using nine Flat Washers (D), nine Spring
Washers (E) and nine Bolts (B). FULLY TIGHTEN ALL BOLTS (B) USING WRENCH (F).

STEP 9:
Insert Shelf Supports (J) into TV Console.
STEP 10:
Carefully place Adjustable Shelves (10) onto Shelf Supports (J).

IMPORTANT: MAKE SURE ALL BOLTS AND SCREWS ARE SECURELY TIGHTENED BEFORE USING THIS PRODUCT.
STEP 11:
Adjust levelers to level the TV Console.