Office Star Products MERGE FOYER User manual

MRG07R1
MERGE FOYER TABLE
OPERATING INSTRUCTIONS
LIMITED WARRANTY
Office Star Products warrants to the original purchaser that this product will be free from defects in material and workmanship as
described below. Office Star Products will repair or replace, at its option, without charge to the original purchaser only, defective
products or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items
out of production may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of
purchase as shown on your original sales receipt. This warranty is your sole remedy for product defects and excludes defects
due to or arising in connection with product abuse or misuse, use modification of, or attachments to the product, and products or
parts not used, maintained, or installed in accordance with the company’s installation, maintenance and/or applicable guidelines.
There are no other warranties, express or implied, other than those specifically described, including without limitation any implied
warranty of merchantability or of fitness for a particular purpose. Office Star Products will not be responsible for incidental or
consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state. Our quality standards are among the highest in the industry. Sometimes, no matter how
hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly
remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
1. Do not use this product unless all screws and bolts are securely
tightened.
2. Check that all screws and bolts are tight every three months or as
needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only

© Office Star Products November 2013
2
1
PART QTY
1. Top Panel ...................1
2. Shelf Panel ..................2
3. Legs ........................4
4. Flat Washer .........12 + 1 Extra
5. Lock Washer ........12 + 1 Extra
6. Bolt ...............12 + 1 Extra
7. Allen Wrench (not shown) .......1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Secure Shelf Panels (2) to two Legs (3) using two Flat Washers (4), two Lock Washers (5) and two Bolts (6) for each Leg (3). DO NOT FULLY
TIGHTEN BOLTS (6).
STEP 2 Secure remaining two Legs (3) to Shelf Panels (2) using two Flat Washers (4), two Lock Washers (5) and two Bolts (6) for each Leg (3). DO NOT FULLY
TIGHTEN BOLTS (6).
STEP 3 Secure Top Panel (1) to Legs (3) using one Flat Washer (4), one Lock Washer (5) and one Bolt (6) for each Leg (3). APPLY FIRM PRESSURE TO
ALIGN AND FULLY TIGHTEN ALL BOLTS (6) USING ALLEN WRENCH (7).
ATTENTION: MAKE SURE ALL BOLTS ARE FULLY TIGHTENED BEFORE USING TABLE.
5
46
STEP 1 STEP 2
STEP 3
2
64
5
3
3
3
3
5
46
3
3
3
3
MRG07R1
MERGE FOYER TABLE
ASSEMBLY INSTRUCTIONS