Office Star Products SPACE SEATING 839-11B35WA User manual

839-11B35WA
BREATHABLE MESH & SEAT BACK CHAIR
OPERATING INSTRUCTIONS
LIMITED WARRANTY
SPACE®chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by
persons weighing 400 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration,
accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not
cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on
all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up. To
lower seat height sit on chair and lift lever (1) up.
NOTE: It is normal for chair to slightly lower
under body weight.
• 3 POSITION 2-TO-1 TILT & LOCK ADJUSTMENT
This Deluxe Control allows back to tilt 2 degrees for every 1
degree of seat tilt. Back also locks in 3 positions (Fully back, Mid
& Upright). The back has an anti-kickback which needs pressure
on the back in order to release. To tilt or free float push lever (4)
(on left side of chair) back and lean back. To lock push lever (4)
forward. NOTE: in the Mid and Fully back position you will hear
a click when it is locked. To unlock push lever (4) back and apply
pressure to back. NOTE: anti-kickback keeps chair back from
making unwanted sudden forward movement.
• TILT TENSION ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension.
NOTE: Be careful not to loosen tilt adjustment knob completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms to
move up or down freely. Release the button (3) once the desired
height is reached.
• ARM WIDTH ADJUSTMENT
To adjust arm width, push lever (5) down, adjust arm to desired
width, and lift lever (5) to lock arm into position.
2
1
5
3
4

PART QTY
1. Base ....................1
2. Casters ..................5
3. Pneumatic Cylinder .........1
4. Mechanism ...............1
5. Seat .....................1
6. Back Assembly ............1
7. Arms (7L & 7R) ............2
8. Arm Screws ...............8
9. Mechanism Screws .........4
10. Back Support Screws ......3
11. Back Support (Pre-Installed) . 1
12. Allen Wrench .............1
1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2 Align the holes in the Arms (7L & 7R) with the holes in the Seat (5), attach Arms (7L & 7R) to Seat (5) using four Arm Screws (8) for each
Arm (7). FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 3 Attach Mechanism (4) to Seat (5) with the arrow towards the front of the chair using four Mechanism Screws (9), FULLY
TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 4 Attach Back Support (11) to rear of Mechanism (4) using three Back Support Screws (10),
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 5 Insert Pneumatic Cylinder (3) into Base (1), Place the assembled seat on top of Pneumatic Cylinder (3) and
apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
© Office Star Products May 2012
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5
2
3
1
12
10
11
7R
8
8
12
12
9
4
4
57L
X5
X4
X4
6
839-11B35WA
BREATHABLE MESH & SEAT BACK CHAIR
ASSEMBLY INSTRUCTIONS
X4
X3
5