Office Star Products OSP Designs MET1524 Operation instructions

MET1524
24’’ SADDLE STOOL
ASSEMBLY INSTRUCTIONS
OSP DESIGNS SEATING LIMITED WARRANTY
OSP Designs chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in normal use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor, freight
or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
1. Do not use this product unless all screws and bolts are securely
tightened.
2. Check that all screws and bolts are tight every three months or as
needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.

PARTS LIST
(B2) Leg (2 PCS)
(D) Long Stretcher (2 PCS)
(A) Saddle Seat (1 PC) (B1) Leg (2 PCS)
(C) Short Stretcher (2 PCS)
HARDWARE LIST
DRAWINGNO DESCRIPTION SIZE QUANTITY
1
2
3
4
5
Bolt 8 PCS5/16’’ x 2’’
1 3/4’’
5/16’’
5/16’’
5 mm
8 PCS
8 PCS
8 PCS
1 PC
Wood Screw
Lock Washer
Flat Washer
Allen Wrench
Phillips screwdriver also needed for assembly (not provided)

STEP 1
STEP 2
(2)
(2)
(D)
(D)
(B2)
(B1)
(B2) (B1)
(B1)
(B2)
(C)
DO NOT FULLY TIGHTEN SCREWS
DO NOT FULLY TIGHTEN SCREWS

STEP 3
(4)
(B)
(3)
(1)
(5)
APPLY FIRM PRESSURE TO ALIGN. FULLY TIGHTEN ALL BOLTS & SCREWS