OfficeSource PL216 User manual

OFFICE FURNITURE
MODEL NO. PL216
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Check to be sure that you have all parts and hardware.
Keep all hardware parts out of reach of children.
Do not tighten all screws/bolts until all completely assembled.
IMPORTANT NOTE :
Z:\Office Furniture\ECONOWISE\OLD\Performance_logo.jpg
PAGE 1 OF 2
REV. 1 PL 216_AI
ASSEMBLY INSTRUCTION FOR PL BASIC LECTERN
COMPONENTS
HARDWARE
Place all wooden parts on a clean, smooth surface to prevent the parts from being scratched.
A
Side Panel RIGHT
B
Back Panel
D E F GC
1 2 3
M4 x 65
Allen-Key
1 Pc
Adjustable
Glide
6 Pcs
4 5 6
Klix Cam
14 Pcs
Housing
Cap (Short)
14 Pcs
Cam Lock
14 Pcs
9
Screw
#3.5 x 16mm
16 Pcs
Shelf Support
Pin Small
6 Pcs
10 117
KLIX CAM INSTRUCTIONS
Insert the cam with the arrow
pointing towards the hole in the
edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3DETAIL x-x
ADJUST THIS SCREW FOR DOOR ALIGNMENT
AFTER ASSEMBLY THE HINGES.
BACK VIEW
HINGES INSTRUCTIONS
Side Panel LEFT Bottom Panel Fixed Shelf Panel Top Shelf Panel Front RailAdjust Shelf Panel
H
AB
G
D
F
E
AB
D
F
E
G
C
H H
Castor Without
Stoper
2 Pcs
Castor With
Stoper
2 Pcs
Shelf Support
Pin Big
2 Pcs
8
Screw
#3.5 x 32mm
3 Pcs
OPTION 1 OPTION 2
ASSEMBLY INSTRUCTIONS
MODEL: PL216
1 of 2.
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
®

OFFICE FURNITURE
MODEL NO. PL216
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS
MODEL: PL216
2 of 2.
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
Z:\Office Furniture\ECONOWISE\OLD\Performance_logo.jpg
PAGE 2 OF 2
1
Assemble Front Rail(H) to Top
Shelf(G) with Screw (4).
3
4
REV. 1
G
H
G
H
Assemble Fixed Shelf(E),Bottom Panels(D),BacK
Panel(C) & Top Adjust Shelf(G) to Side Panels
Left(A) with Cam Lock (1) and Klix Cam (2).
Attach Big Shelf Support
pin(8) to Top Shelf
panel(G).
G
H
8
2
GE
D
C
H
A
Screw Adjustable Glides (5)
into Side Panel(A)&(B).
5
Attach Castor(9)&(10) to Bottom
Panel(D) with Screw(11).
Insert Adjustable Shelf(F) into
Lectern & Support with Shelf
Support Pin(7).
Attach Shelf Support Pin(7)
to Side Panel Left &
Right(A)&(B) with optional
position shwon.
OPTION 1
OPTION 2
7
OPTION 1 OPTION 2
7
4
11
10
A
D
A
E
D
B
G
H
A
5
PL 216_AI
GC
B
A
E
F
D
E
F
D
B
A
G
B
F
D
E
A
G
C
C
ASSEMBLY INSTRUCTION FOR PL BASIC LECTERN
®