OfficeSource PL231 User manual

E
CB D
A
Side Panel-R Hanging Rail-2Pcs Back Panel Bottom Panel
Housing Cap (Short)
10 Pcs
Cam Lock
10 Pcs
Klix Cam
10 Pcs
11 2 3
JCBC Screw
M6 x 35mm = 4pcs
14
Washer = 8pcs
4
M4 x 65
Allen-Key
1 Pc
5
1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
COMPONENTS
HARDWARE
Insert the cam with the arrow
pointing towards the hole in
the edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
KLIX CAM INSTRUCTIONS
MODEL: PL 231
ASSEMBLY INSTRUCTIONS
6
Screw
3.5X30MM
4 Pcs
Side Panel-L
A
B
E
CD
®
Last Updated: 02/2021
MODEL NO. PL231
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023

Attach Side Panel (B) to Hanging Rail (C) and Back
Panel (D) by using Cam Lock (1) and Klix Cam (2).
Attach Hanging Rail (C) and Back Panel (D) to Side
Panel (A) by using Cam Lock (1) and Klix Cam (2).
1 2
2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
MODEL: PL 231
ASSEMBLY INSTRUCTIONS
2 OF 2
! ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
A
D
C
A
C
D
B
E
B
A
C
Attach Bottom Panel (E) to Side
Panel (A) & (B) by using Cam Lock
(1) and Klix Cam (2).
Attach Housing Cap(3) to each Klix
Cam(2) by pushing the neck
thought the center of the Klix Cam.
3
3
4
5
4
4
5
B
A
E
CE
Attach the PL231 to others PL231 by
using JCBC Screw & Flat Washer(1).
Attach the PL231 to
others PL231 by
using Screw(1).
6
®
Last Updated: 02/2021
MODEL NO. PL231
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023