OFM QUARTERS & CRAFT QCLIBBWH User manual

1 of 10
Model No.QCLIBBWH
ATTENTION
Make sure all bolts, screws and other fasteners are fully tightened before use. Tighten all bolts/screws/other fasteners at
least every 6 months or whenever needed.
WARNING!
To ensure proper assembly, follow all steps and use all parts. Failure to follow this warning can result in serious injury
to yourself or others.
WARNING!
Serious injury or death can occur due to furniture tip-over.
To reduce the risk of furniture tip-over:
·ALWAYS install provided tip-over restraint.
·NEVER put heavy items on top of this product.
·NEVER allow children to climb, stand, or hang on this product.
·ALWAYS place heaviest items on lowest shelves.
quartersandcraft.com

2 of 10
A B C D E. Length 15 mm F
G. Length 20 mm H I. Length 20 mm J K
4
2
1
1
2
1
3
1
4
2
5
1
6
1
7
1
8
1
9
1
10
1
18
1
19
1
11
2
12
1
13
1
14
1
15
1
16
1
17
1
aX3
Hardware assembly instruction
Tip-Over Restraint Kit
bX5 dX3 (1 for spare)
(1 for spare) cX2
(1 for spare)
fX3 (1 f
w
or spar
, 50mm le
e)
silver, 60mm length eX2 yello
ngth gX2
×35（1 for Spare )
×7（1 for Spare ) ×2 ×8 ×6
×35（1 for Spare ) ×35（1 for Spare ) ×15（1 for Spare ) ×25（1 for Spare )
1234
※Put in “B” as the arrow points to
“C”and then turn clockwise to secure
CAM & PIN
B
Dowel Shelf PinHinge
J
I
F
E
F
C
K
L
× 2

Step 1-1
X 16
A
Step 1-2
X 14
C
C
Dowel assembley
PIN assembley
3 of 10
X 2
B
Step 2
X 2
B
Step 3
A
A
A
A
A
AAAA
A
A
AA
A
A
A
C
C
C
C
C
C
C
C
CCC
CCC
B
B
B
B

4 of 10
X 6
B
X 4
B
Step 4
Step 5
Step 5
B
B
Step 6
If the back panel is curved,
please place the convex side facing front
If the back panel is curved,
please place the convex side facing front
B
B
B
B
B
⑱⑱

X 2
B
X 4
B
5 of 10
X 20
C
X 16
A
Step 7-1
Step 7-2
Step 8Step 8 Step 9-1
C
 
AA
A
A
A
A
A
A
AA
A
A
C
CC
C
A
A
A
A
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
B
B
B
B
C

6 of 10
Step 10-1
X 2
B
X 2
B
Step 10-2
Step 11 Step 12
Step 10-3
X 2
B
X 2
B
If the back panel is curved,
please place the convex side facing front
B
BB
B
B
B
B
B
B

7 of 10
X 6
K
X 6
B
X 2
I
X 2
H
X 2
L
G
H
X 8
J
X 4
F
X 24
E
F
J
Step 14Step 13
Step 15 Step 16
Step 17
Tighten Completely
X 2
A
X 6
G
LL
2 CAM(B) ⑬
⑬
K
K
K
K
K
K
B
B
B
B
A
A
JJ
JJ

Step 18
Step 19
Side to Side door hinge adjust-
ment.
Front to back door hinge adjust-
ment.
Up or down Door Hinge Adjust-
ment.
Door adjustment
Cover the cam with D if needed
X 14
D
D
D
D
D
D
D
D
D
D
D
D
D
8 of 10

9 of 10
WARNING!
Serious injury or death can occur due to furniture tip-over.
To reduce the risk of furniture tip-over:
-ALWAYS install provided tip-over restraint.
-NEVER put heavy items on top of this product.
-NEVER allow children to climb, stand, or hang on this product.
-ALWAYS place heaviest items on lowest shelves.
Tip-Over Restraint
Tip-Over Restraint Hardware Kit
Wood Stud
Illustration
Illustration
Illustration
Drywall
Masonry
abcd
(Sliver, Length 60mm)
ef
( Yellow, Length 50mm)
FOR Drywall Anchor Only
g
Drywall Anchor
WALL ANCHORING GUIDE:
Your wall material and furniture type will determine the wall anchoring hardware that best fits your use.
Wall Material Types: The guide below helps you to determine your wall material and the correct steps to affix the tip over
restraint to your wall material.
Drywall or plaster with available wood stud: (Hardware needed: a, b, d, e)
1. Mark the attachment point(s) at the appropriate height and positioned over wood stud(s).
2. Drive screw directly into the wood stud(s) at your mark(s).
3. Reference visual A
Drywall without available wood stud: (Hardware needed: a, b, e, f, g)
1. Mark the attachment point(s) at the appropriate height.
2. Drill 10 mm (3/8) pilot hole(s) through the wall at your mark(s).
3. After drilling hole, insert drywall anchor completely.
4. Insert screw. Turn screw clockwise until snug
5. Reference visual B. Do not over-tighten
Masonry: (Hardware needed: a, b, c, d, e)
1. Mark the attachment point(s) at the appropriate height.
2. Drill 8mm (5/16) pilot hole(s) into the wall at your mark(s).
3. Drive your anchoring hardware into the hole(s).
4. Reference visual C. Do not over-tighten
If your wall material is not listed here, you have any questions regarding wall anchor hardware, or you need
assistance with locating a wood stud, please consult your local hardware retailer.
A)
B)
C)
Step 20

4. Prohibit children from climbing, standing, or
hanging on any drawers, doors, or shelves.
3. Do not place a TV on top of any furniture not
explicitly intended to hold a TV. Do not place
heavy objects on top of any furniture.
1. For maximum safety, furniture with included
wall tethering restraints must be secured to
the wall according to assembly instructions.
2. Always place heavy objects at the lowest
possible point.
Help prevent tip-overs with these safety tips
In Masonry
wall
wall
wall
gb
e
f
b
d
e
In Drywall or Plaster with
Available Wood Stud
In Drywall Without Available Wood Stud
In Product
wall
cb
d
e
e
e
b
a
10 of 10
wall
Step 21