OLG Flow Chair User manual

Flow Chair
Operating Instructions

Flow Chair Operating Instructions
2
Operating Instructions
Flow Chair
Armrest Height Adjustment
While seated, grasp each armrest and raise to your desired height.
In order to lower the arm, lift the armrest to its highest position
and it will go back down to the lowest height. Then repeat to get
to your desired height.
A: Arm Pad Forward and Backward Adjustment
While seated, push the arm pad forward or backward to a desired
position.
B:

Flow Chair Operating Instructions
3
Operating Instructions
Flow Chair
Arm Pad Horizontal Adjustment
While seated, each armrest horizontally slides inward and outward
from the center.
C: Arm Pad Angle Adjustment
While seated, each arm pad can be rotated inward or outward.
D:

Flow Chair Operating Instructions
4
Operating Instructions
Flow Chair
Seat Height Adjustment
While seated, pull the single control lever upward and hold it
while raising or lowering the seat to reach your desired seat
height. When the lever is released to its original position, the seat
height is locked.
E: Backrest Tilt Angle Adjustment
While seated, pull the single control lever completely backward
and lean against the back. When your desired angle is achieved,
return the lever to the original middle position to lock your tilt
angle into place. There are 4 positions.
F:

Flow Chair Operating Instructions
5
Operating Instructions
Flow Chair
Seat Slider Adjustment
While seated, pull the single control lever and move the seat
forward to reach your desired seat position. When your desired
seat position is achieved, release the lever to lock your seat
position.
H:

Sydney 02 8188 2732
Melbourne 03 9111 0315
Brisbane 07 3733 1923
Adelaide 08 7111 0810
Perth 08 9468 2707
info@olgoffice.com
myolg.online | olgoffice.com | officedesigner.net | motionoffice.com