Olympia AD180 Cree XP-G LED User manual

Congratulations on your purchase of the
Olympia AD180 Cree®XP-G LED high-
performance flashlight. This product is designed
to provide you with the best possible functionality.
The AD180 utilizes Cree®LED technology that
is geared for optimum brightness and efficiency.
It’s constructed in aircraft-grade aluminum with
premium Type II hard anodized, anti-abrasive
finish. The lightweight, compact design makes
it a functional light for multiple uses including
hunting, hiking, camping, caving, general
household use, recreational activities, rugged
sports or emergency situations. Please take a
few moments to read this user guide to ensure
that you get the best performance and years of
trouble-free service.
Product Description
Battery Installation
1. Unscrew the tail switch cap and insert
1xCR123 (non-rechargeable) / 1x16340
(rechargeable) *battery. The (+) terminal on the
batteries should face toward the flashlight’s
head.
2. Replace the tail switch cap and be sure to
tighten snugly, but do not over tighten as this
could strip the threads in the cap. Turn on the
flashlight as indicated in any of the options
listed in the table that follows. Note: If the tail
cap is not tightened snugly; the flashlight
will not turn on.
3. When the battery life is nearly depleted, your
flashlight will blink to indicate new batteries
are needed.
*Non-rechargeable battery included
Flashlight Operation
Your Olympia AD180 Cree®XP-G LED high-
performance flashlight has a push-button tail
switch for on/off operation and is equipped with
1) Momentary and 2) Continuous light options.
It also has 5 light modes to suit your varied
needs. See table instructions to access these
functionalities:
Olympia AD180
Cree®XP-G LED
Flashlight
User Guide
Lighting Operation Modes
Momentary-on
Lighting
Press the push-button tail switch
half-way to activate the light
momentarily.
Continuous
Lighting
Press the tail switch push-button to
completely turn on the flashlight.
The light will stay on until the push-
button is turned off.
Lighting Modes
There are five types of light output:
HighMiddle
LowStrobeSOS
Press the tail push-button to switch
to each mode
Accessing the 5 Lighting Modes
High Beam Press the push-button tail
switch once
Mid Beam Press the push-button tail
switch twice
Low Beam Press the push-button tail
switch 3 times
Strobe Press the push-button tail
switch 4 times
SOS Press the push-button tail
switch 5 times
Memory function
Your Olympia AD180 Cree®XP-G LED flashlight
automatically memorizes the last light setting/
mode used when the flashlight next is turned
on. i.e., after being in any one of the five light
settings (HighMiddleLowStrobeSOS) for
3 seconds, the last one used will be memorized.
Maintenance and Precautions
1. Do not disassemble the sealed head. Doing
so can cause damage to the flashlight and will
void the warranty.
2. Use high-quality batteries or you run the risk
of the flashlight being damaged by electrolyte
leakage or battery breakage.
3. If the flashlight will not be used for a long time,
remove the batteries to avoid damage caused
from battery leakage.
4. Lubricate the O-rings regularly using a
Q-tip®. Apply a small dab of silicone grease
or petroleum jelly to the contacts to prevent
corrosion. Doing so will keep the flashlight
properly sealed against water. If the O-rings are
damaged after prolonged use, replace them.
5. Clean the flashlight contacts periodically
especially if the light flickers or does not light
up. There are different reasons for a flickering or
non-working light:
A: The batteries may need to be replaced.
Solution: Replace old/defective batteries with
new ones (be sure to double check correct
installation of + and - terminals).
B: The threads, PCB board contact or other
contacts are dirty.
Solution: Use a Q-tip®to apply a tiny amount
of alcohol to clean the contact points.
If the above methods do not work, please refer to
the warranty policy listed in this user guide.
Warning
The AD180 is a high-intensity lighting device and
capable of causing eye damage. Please avoid
shining the light directly into the eyes.
!
Clip Tail
Cap
Switch
Lanyard
Hole
Body
Head
Clip Tail
Cap
Switch
Lanyard
Hole
Body
Head
Clip Tail
Cap
Switch
Lanyard
Hole
Body
Head
Clip Tail
Cap
Switch
Lanyard
Hole
Body
Head
Clip Tail
Cap
Switch
Lanyard
Hole
Body
Head
Clip Tail
Cap
Switch
Lanyard
Hole
Body
Head

Limited Product Warranty
Coverage
Giant International Ltd. warrants this product against
defects in materials and workmanship under normal
use for 24 months from the date of purchase. Giant
International Ltd., at its option, will at no charge
repair or replace any flashlight that does not conform
to this warranty. This warranty is valid only for sales
in the United States and Canada and extends to the
first purchaser only and is not transferable.
Exclusions
This warranty does NOT cover accessories such
as lanyards and holsters, defects or damage
resulting from misuse, accident or neglect,
improper operation or alteration, normal wear and
tear, cosmetic or surface damage, or accessories
on which serial numbers or date tags have been
altered. DAMAGES OR DEFECTS RESULTING
FROM SERVICE WORK PERFORMED BY
SERVICE CENTERS NOT AUTHORIZED BY GIANT
INTERNATIONAL LTD. ARE NOT COVERED.
Obtaining Service
To obtain warranty service, call 1-866-537-0384
or email us at [email protected] in the USA
and Canada. All flashlights must be shipped to a
Giant International Ltd. Service Center freight and
insurance prepaid by the consumer, and include
dated proof of purchase, description of problem,
and the consumer’s address and telephone number.
General Conditions
REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS EXPRESS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER.
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE GIVEN ONLY IF
SPECIFICALLY REQUIRED BY APPLICABLE LAW.
IN NO EVENT SHALL GIANT INTERNATIONAL
LTD. BE LIABLE FOR DAMAGES IN EXCESS OF
THE PURCHASE PRICE OF THE FLASHLIGHT, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF
THE USE OR INABILITY TO USE THE PRODUCT,
TO THE FULL EXTENT THESE DAMAGES MAY
BE DISCLAIMED BY LAW. Some states and
jurisdictions do not allow the limitation or exclusion
of incidental or consequential damages, so the
above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights,
and you may also have other rights that vary from
state to state or from one jurisdiction to another.
Giant International Ltd.
3495 Piedmont Rd. NE
Bldg. Ten, Ste. 920
Atlanta, GA 30305
USA
E-mail: [email protected]
www.olympiaproducts.com
Telephone [phone]
©2014 Giant International Limited. All rights reserved.
All registered trademarks and trade dress are the property of the
respective owners.
KEM-ML37605-01A
Product Specs
Mode High Middle Low Strobe
Light
Output 180
Lumens
100
Lumens
20
Lumens 9Hz
Runtime 2hrs. 4hrs. 14hrs. -
Bulb Cree®XP-G LED with a lifespan of
50,000 hrs.
Batteries 1xCR123 (non-rechargeable) /
1x16340 (rechargeable) battery
Flashlight
Dimensions
3.4”Lx0.98”D (85.5 mm x 25 mm)
Working Voltage
Range 1-4.2V
Weight w/o
batteries 1.8 ozs (51.9 g)
Beam Distance 110 M
Beam Intensity 3010 CD
Waterproof IPX-8 (up to 2M)
Impact Resistance 1M
Package includes
• 1 Olympia AD180 Cree®XP-G LED
• 1 Lanyard
• 1 Belt clip
• 2 spare O-rings
• 1 spare rubber tail switch cover
• 1 CR123 (non-rechargeable) battery
• 1 User guide