Olympia CREE XPG LED User manual

Congratulations on your purchase of the Olympia
RG245 CREE XPG LED high-performance,
high durability flashlight. The Olympia brand is
synonymous with integrity. Our word is our bond.
As a result, this product is designed to provide you
with the best possible functionality. Its innovative
CREE XPG LED technology is geared for optimum
effectiveness and high efficiency. Its ability to
endure rugged use is enabled by the aircraft-grade
aluminum with premium type III hard anodized
anti-abrasive finish. This represents the industry’s
top tier in durable finishes. It is lightweight and
compact in design making it a great option for
portability. Use it in any situation - hunting, hiking,
camping, caving, general household, recreational
activities, rugged sports, industrial worksite or
emergency situations. Please take a few moments
to read this user guide to ensure that you get the
best performance and years of trouble-free use.
Product Description
Battery Installation
1. Unscrew the tail switch cap and insert
1*CR123 rechargeable (NiMH) *battery. The (+)
terminal on the batteries should face toward
the flashlight’s head.
2. Replace the tail switch cap and be sure to
tighten snugly, but do not over tighten as this
could strip the threads in the cap. Turn on the
flashlight as indicated in any of the options
listed in the table that follows. Note: If the tail
cap is not tightened snugly, the flashlight
will not turn on.
3. When the battery life is nearly depleted, your
flashlight will blink to indicate new batteries are
needed.
Flashlight Operation
Your Olympia RG245 CREE XPG LED high-
performance, high durability flashlight has a
push-button tail switch for on/off operation and is
equipped with 1) Momentary and 2) Continuous
light options. It also has 5 illumination light modes
to suit your varied needs. See table instructions
that follow to access these functionalities:
Olympia RG245
CREE XPG LED
Flashlight
User Guide
Lighting Operation Modes
Momentary-on
Lighting
Press the push-button tail switch
half-way to activate the light
momentarily.
Continuous
Lighting
Press the tail switch push-button to
completely turn on the flashlight.
The light will stay on until the push-
button is turned off.
Lighting Modes
There are five types of light output:
HighMiddle
LowStrobeSOS
Press the tail push-button to switch
to each mode
Accessing the 5 Lighting Modes
High Beam Press the push-button tail
switch once
Mid Press the push-button tail
switch twice
Low Beam Press the push-button tail
switch 3 times
Strobe Press the push-button tail
switch 4 times
SOS Press the push-button tail
switch 5 times
Memory function
Your Olympia RG245 CREE XPG LED
high-performance, high durability flashlight
automatically memorizes the last light setting/
mode used when the flashlight next is turned on.
i.e., after being in any one of the five light settings
(HighMiddleLowStrobeSOS) for 3
seconds, the last one used will be memorized.
Maintenance and Precautions
1. Do not disassemble the sealed head. Doing
so can cause damage to the flashlight and will
void the warranty.
2. Use high-quality batteries or you run the risk
of the flashlight being damaged by electrolyte
leakage or battery breakage.
3. If the flashlight will not be used for a long time,
remove the batteries to avoid damage caused
from battery leakage.
4. Lubricate the O-rings regularly using a
Q-Tip®. Apply a small dab of silicone grease
or petroleum jelly to the contacts to prevent
corrosion. Doing so will keep the flashlight
properly sealed against water. If the O-rings are
damaged after prolonged use, replace them.
5. Clean the flashlight contacts periodically
especially if the light flickers or does not light
up. There are different reasons for a flickering or
non-working light:
A: The batteries may need to be replaced.
Solution: Replace old/defective batteries with
new ones (be sure to double check correct
installation of + and - terminals).
B: The threads, PCB board contact or other
contacts are dirty.
Solution: Use a Q-Tip®to apply a tiny amount
of alcohol to clean the contact points.
If the above methods do not work, please refer to
the warranty policy listed in this user guide.
Switch
Tail
Cap
Clip
Lanyard
Hole
BodyHead

Limited Product Warranty
Coverage
Giant International Ltd. warrants this product against
defects in materials and workmanship under normal
use for 24 months from the date of purchase.
Giant International Ltd., at its option, will at no
charge repair or replace any flashlight that does not
conform to this warranty. This warranty is valid only
in the United States and Canada and extends to the
first purchaser only and is not transferable.
Exclusions
This warranty does NOT cover accessories such
as lanyards and holsters, defects or damage
resulting from misuse, accident or neglect,
improper operation or alteration, normal wear and
tear, cosmetic or surface damage, or accessories
on which serial numbers or date tags have been
altered. DAMAGES OR DEFECTS RESULTING
FROM SERVICE WORK PERFORMED BY
SERVICE CENTERS NOT AUTHORIZED BY GIANT
INTERNATIONAL LTD. ARE NOT COVERED.
Obtaining Service
To obtain warranty service, call 1-866-537-0384
or email us at [email protected] in the USA
and Canada. All flashlights must be shipped to a
Giant International Ltd. Service Center freight and
insurance prepaid by the consumer, and include
dated proof of purchase, description of problem,
and the consumer’s address and telephone number.
General Conditions
REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS EXPRESS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER.
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE GIVEN ONLY IF
SPECIFICALLY REQUIRED BY APPLICABLE LAW.
IN NO EVENT SHALL GIANT INTERNATIONAL
LTD. BE LIABLE FOR DAMAGES IN EXCESS OF
THE PURCHASE PRICE OF THE FLASHLIGHT, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF
THE USE OR INABILITY TO USE THE PRODUCT,
TO THE FULL EXTENT THESE DAMAGES MAY
BE DISCLAIMED BY LAW. Some states and
jurisdictions do not allow the limitation or exclusion
of incidental or consequential damages, so the
above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights,
and you may also have other rights that vary from
state to state or from one jurisdiction to another.
Giant International Ltd.
3495 Piedmont Rd. NE
Bldg. Ten, Ste. 920
Atlanta GA 30305
USA
E-mail: [email protected]
www.olympiaproducts.com
Telephone [phone]
(c)2013 Giant International Limited. All rights reserved.
All registered trademarks and trade dress are the property of the
respective owners.
KEM-ML37601-01
Warning
The RG245 is a high-intensity lighting device and
capable of causing eye damage. Please avoid
shining the light directly into the eyes.
Product Specs
Mode High Middle Low Strobe
Light
Output 245
Lumens
110
Lumens
20
Lumens 9Hz
Runtime 1 hr. 3.5 hrs. 45 hrs. -
Bulb CREE XPG LED with a lifespan of
50,000 hrs.
Batteries CR123 rechargeable (NiMH) batteries
(not included)
Flashlight
Dimensions
3.3”Lx0.98”D (84.4mmx25mm)
Working Voltage
Range 1-4.2V
Weight w/o
batteries 1.9ozs (53.3g)
Beam Distance 122M
Beam Intensity 3845CD
Waterproof IPX-8 (up to 2M)
Impact Resistance 1.5M
Package includes
• 1 Olympia RG245 CREE XPG LED flashlight
• 1 Nylon holster with dedicated belt loop and
a D-ring
• 1 Lanyard
• 2 Spare O-rings
• 1 Spare rubber tail switch cover
• 1 belt clip
• 1 User guide
!