Olympia K-5050 Series User manual

INSTALLATION
Tools:
Adjustable Wrench Plumbers Putty Teon Tape Rags
Model Number: K-5030, K-5050(CP, PVD BN,
ORB)
Warnings and Notes:
Check with local plumbing code requirements before installation.
This product should be installed by a local listed plumber.
Do not use plumbers putty on threads.
OLYMPIA FAUCETS, INC.
Interchange City Distribution Center #20
1277 Heil Quaker Boulevard
La Vergne, TN 37086
[phone]
www.olympiafaucets.com
Installation Steps:
Single Handle Pull-Out Kitchen Faucet
(1) Shut off water supplies. Remove old faucet.
Clean mounting surface in preparation for new
faucet.
(2) For 1-Hole Installation:- Make sure
washer is under escutcheon, slide escutcheon
for 1-hole installation to the faucet body. Insert
faucet through mounting hole. Make sure
spout swivel angle are even to the right and to
the left. From underneath of the sink, thread
locknut and washer to the faucet body, tighten
locknut with help of supplied mounting tool.
(3) For 3-Hole Installation:- Thread mount-
ing bolts to deck plate. Apply plumbers putty
under the base gasket. Place faucet with
deck plate in position on the sink. Make sure
spout swivel angle are even to the right and to
the left. From underneath of the sink, thread
locknut and washer to the faucet body, tighten
locknut with help of supplied mounting tool.
(4) Thread and tighten both mounting nuts to
mounting bolt to secure deck plate.
(5) Connect spray head hose to faucet outlet
hose from underneath of the sink. Install
weight on spray head hose, adjust weight’s
position so the spray head can be retracted
properly.
(6) Connect hot and cold inlet supply hoses
to supply stops. For ½” connection; use 3/8”
male to ½” female adapter for installation.
Adapters are optional and not provided with
faucet. Turn on both side supply stops.

Exploded Drawing:
* Note: Please specify nish/color when ordering.
A1 A2
B
C
D
E
1
2
3
L
M
G
H
K
J
I
4
F
ITEM # DESCRIPTION
A1 OP-120001* Metal Lever Handle (For K-5030)
A2 OP-120003* Metal Loop Handle (For K-5050)
BOP-420008* Cap
COP-420009 Retainer Nut
DOP-320001 Ceramic Disc Cartridge
EOP-420011 Spray Head Support
F OP-420013* Deck Plate & Base Gasket
GOP-520003 Mounting Bolts & Nuts
H OP-520004 Locknut
IOP-420063* Pull-out Spray Head
JOP-420014 Weight
KOP-420015 Spray Hose
LOP-520006* 1 Hole Mounting Assembly
MOP-520012 Mounting Tool
1OP-490005 Button
2 OP-490029 Allen Screw
3OP-420010 O-Ring
4OP-420017 Spray Head Button
For more care information or trouble shooting
inquiries about your Olympia product, Please call:
OLYMPIA FAUCETS, INC. [phone]
8AM - 8PM EST (5AM to 5PM PST)
www.olympiafaucets.com