Olympia L-6050 User manual

INSTALLATION
Tools:
Adjustable Wrench Plumbers Putty Sealant Tape Rags
Model Number: L-6050, L-6051, L-6052, L-6050-
WD, L-6051-WD, L-6052-WD (CP, BN)
Warnings and Notes:
Check with local plumbing code requirements before installation.
This product should be installed by a local listed plumber.
Do not use plumbers putty on threads.
OLYMPIA FAUCETS, INC.
Interchange City Distribution Center #20
1277 Heil Quaker Boulevard
La Vergne, TN 37086
[phone]
www.olympiafaucets.com
Installation Steps:
Single Handle Lavatory Faucet
(1) Shut off water supply. Remove old faucet.
Clean mounting surface in preparation for new
faucet.
(2) For 1-Hole Installation:- Install mounting
bolt. Place the faucet in position on the sink.
Place washer under the faucet. From under the
slide mounting washer and mounting bracket
through mounting bolt. Install the locknut to the
mounting bolt..
(3) For 3-Hole Installation:- Install mounting
bolt. Place the faucet in position on the sink.
Place washer and deck plate under the faucet.
From under the sink slide mounting washer
and mounting bracket through mounting bolt.
Install the locknut to the mounting bolt..
(4) Connect hot and cold inlet supply hoses to
supply stops. For 1/2” connection use 3/8” male
to 1/2” female adapter for installation. Adapters
are optional and not provided with the faucet.
(5) Turn on Faucet. Check for any minor joint
leaks.
(1) Remove pop-up ange from body
(2) Place a ring of putty on the bottom of
ange.
(3) Insert pop-up ange through drain
hole and attach ange to body. Ensure
the pop-up outlet faces towards the sink.
Do not overtighten.
Pop-up Drain Installation:
(4) Connect the trap (check
manufacturer’s instructions for
installation).
(5) Insert rod. Tighten the pivot ball nut.

Exploded Drawing:
* Note: Please specify nish/color when ordering. ITEM # DESCRIPTION
AOP-130001* Lever Handle
BOP-430021* Cap
COP-430022 Locknut
DOP-390003 Ceramic Disc Cartridge
E OP-430023* Hole Cover(For L-6051, L-6051-
WD)
FOP-430024* Aerator
GOP-430025 Washer
HOP-430026* Deck Plate
IOP-530005 Mounting Kit
JOP-630005* 50/50 Pop-Up Drain Assembly (For
L-6050, L-6050-WD)
K OP-630006* Brass Pop-Up Drain Assembly (For
L-6052, L-6052-WD)
1OP-490029 3/32” Allen Screw
For more care information or trouble shooting
inquiries about your Olympia product, Please call:
OLYMPIA FAUCETS, INC. [phone]
7AM - 8PM EST (4AM to 5PM PST)
www.olympiafaucets.com
(6) Push rod down to open drain. Insert
the drain plug carefully. Test to ensure the
drain plug is working properly
(7) Connect lift rod strap to the rod using
clip. Tighten the thumbscrew to connect
lift rod strap to pop-up lift rod.