Olympia P-3210 User manual

MAINTENANCE AND CARE INSTRUCTIONS
Olympia products are designed and engineered under strict quality standards. Regular and proper care of our
products will ensure years of trouble free service. To clean, simply wipe with a damp, soft cloth. Do not use
abrasive or harsh cleaners as they may result in nish damage. Regularly remove and clean minor debris from
the aerator.
TROUBLESHOOTING
If water leaks from the tub spout/A.
showerhead:
Shut off both hot and cold water supplies.1.
Use screwdriver counterclockwise to remove2.
handles (A,B,C).
Remove valve anges and sleeves (D,E).3.
Remove stem assembly (F) and check for damage.4.
If damage is found, replace.
Replace stem assembly (F), trim anges (D,E) and 5.
handles (A,B,C).
INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR OLYMPIA TWO & THREE
HANDLE TUB AND SHOWER SETS
PRODUCT NUMBERS
#P-3210 Three Handle Tub and shower set-Metal Handles
#P-3220 Three Handle Tub and Shower set-Acrylic Handles
#P-1210 Two Handle Tub and Shower Set-Metal Handles
#P-1220 Two Handle Tub and Shower Set-Acrylic Handles
#P-1211 Two Handle Tub Set-Metal Handles
#P-1221 Two Handle Tub Set-Acrylic Handles
#P-1212 Two Handle Shower Set-Metal Handles
#P-1222 Two Handle Shower Set-Acrylic Handles
Olympia Faucets, Inc. © 2011
Caution: This product may not meet the current building code. This product is
not pressure balanced. Pressure balanced products are available from
Olympia. Please consult your nearest Olympia dealer.
OLYMPIA FAUCETS, INC. LIMITED LIFETIME WARRANTY *
Olympia Faucets, Inc. warrants its products to the original consumer purchaser to be free from defects in material
and workmanship as long as the consumer purchaser owns it. Dated proof of purchase must accompany all war-
ranty claims. PVD nishes carry a lifetime warranty in residential service.
Olympia Faucets, Inc. will replace, free of charge, to the original consumer purchaser, any and all parts that
prove defective under normal installation, use, and service. Damage as a result of misuse, abuse, accident, or
improper installation, will consequentially void this warranty. Replacement parts can be obtained from your local
dealer or directly from Olympia Faucets. Olympia Faucets, Inc. recommends using a certied plumber for all
faucet installation and repair.
This warranty is limited to replacement of defective parts only. Incidental and consequential damages, labor
charges, repair, or replacement costs are expressly excluded. Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives
you specic legal rights, as you may have other rights of which vary from state to state.
Installation or maintenance and cleaning must be in compliance with instructions furnished with every Olympia
product. If you nd a problem with your product, please immediately contact your nearest Olympia Faucets, Inc.
dealer or sales representative.
* 2 year limited warranty on commercial and multi-family projects.

Thank you for purchasing this quality product. Olympia products are rigorously tested to provide long service
under normal conditions. Prior to installation, familiarize yourself with this parts diagram. Make sure that you have
all of the illustrated parts for your Olympia product before installation.
ITEM # DESCRIPTION
A OP-190013C
OP-190009C
Metal Handle-Cold
Acrylic Handle-Cold
B OP-140004V
OP-140005V
Metal Handle-Diverter
Acrylic Handle-Diverter
C OP-190013H
OP-190009H
Metal Handle-Hot
Acrylic Handle-Hot
D OP-440012 Flange
E OP-440013 Plastic Escutcheon Nipple
F OP-340002 Stem Unit-Diverter
G OP-340001 Stem Unit-Cold,Hot
H OP-440015 Union
I OP-440016 Nut
J OP-640001 Shower Flange
K OP-640002 Shower Arm
L OP-640031 1.75 GPM Shower Head
M OP-640014 Tub Spout
N OP-440017 Guard Cover
O OP-640015 1/2” IPS Diverter Tub Spout (For
P-1210 & P-1220)
INSTALLATION INSTRUCTIONS
Tools you will need:
Plumbers Putty• Teon Tape•
Screwdriver• Flexible Supply Lines•
Pipe Wrench• Adjustable Wrench•
Basin Wrench• Soft Cloth•
Tub And Shower INSTALLATION:
Carefully shut off both hot and cold water supplies. Cover the drain with a soft cloth to prevent the1.
loss of any parts. If this installation is for a replacement, carefully remove the existing valve and
clean the entire mounting surface.
2a. For ½” threaded pipe connection: connect water supplies to left (hot) and right (cold) valve body
inlets with Teon Tape.
2b. For ½” sweat copper tubing connections: remove rubber and plastic parts to prevent damage. Sol-
der water supplies to left (hot) and right (cold) valve body inlets.
Insert shower ange (J) onto the shower arm (K). Install shower arm (K). Then Install Showerhead 3.
(L). Apply Teon Tape at threaded Connections.
Install tub spout (M). Place handles (A,B,C) on valve stems (F,G) and turn on hot and cold water to4.
full open for one minute to ush thoroughly. Check for leaks.
Shut off water. Remove handles (A,B,C). Install trim anges (D). Re-install handles (A,B,C).5.
Olympia Faucets, Inc. © 2011
For more care information or trouble shooting inquiries
about your Olympia product, please call:
OLYMPIA FAUCETS, INC. [phone]
Central Standard Time: 8:00am ~ 7:00pm
www.olympiafaucets.com
ITEM # DESCRIPTION
1 OP-490037 Screw
2 OP-440014 Seat