Olympus UC-90 User manual

OLYMPUS®
UC-90
U ~? .U~~::J Jt~ :T U-3t'IH
Lithium ion battery charger
2.1~ Olg HH E-f 2.1 8-~71
ii~-T~7tBJt~~
ililt-T ~)t!?,"ft ~ ~
Et
m m
D
~··

VM503701
131 INSTRUCTIONS
Thank you forpurchasing this product Please read and understand these
instructions for properoperation. Be sure to keep this instruction manual
handy
I« future reference.
• Relef to "Battery, AC adapter, and charger" and "Safety Precautions"
in thecamera manual
For customers lA Europe
-
The ·ce· mark indicates that this product complies with the
Eutopean requirements for safety, health, environment and
cwtomer protection. CE.mm products are for sale in
E110pe .
ll!is symbOI(crossed~ut wheeled bin WEEE Annex IV]
indicates separate collection of waste electrical and
electronic equi pment In the EU countries. Please do not
ttrow the equiprnenl into the domestic refuse .
Please use the return and collection systems avaUable in
your country for the disposal of this product
For customers In North and South A!MriCII
ULNotlce
INSTRUCTION· For use in a country other than the USA. The
detachable powef supply CO«< shall comply with the requirement of the
country of destination .
Used f« U.S.A. and Canada:
Power Supply Cord • Listed, detachable, minimum 1.5m (5 fl) to
ma:dmum4 .5 m(15ft)long. Rated minimum 1AI12 5or250VAC ,
having a No . 18AWG copper, Non-Polarized Type , Type SPT-2 or
heavier, flexible cord. One end terminated with aparallel blade, molded
on. attachment plug cap with a 10 Af125 V (NEMA 1-15P)configuration
The other end terminated with appliance couplet.
oth•r countrln:
The unit must be provided with a cord set that complies with local
regulat io ns
FCCNotlc•
For U.S .A.
This device complies with part 15 of the FCC Nles. Operation is subject
tothefollowlngtwoconditions:
(1) This device
may not cause harmful interference, and
(2) this device must accept any interfel'ence received ,indudlng
interference that
mey cause undesired ope111tloo.
Ally unauthorized changes or modifications to this equipment would void
the user's atrthority to operate.
ForCaNida;
This Clan 8
digital apparatus complies with canadian ICES-003.
FEATURES
• It enables to charge the different shapes of Olympus lithium ion
batteries by repladng the
battery cartridge (option).
• 11 enables to charge from a PC via USB comector.
NOTES ON USE
• Do not put !his product In water. Using II when wet or in a humid area
(such u a blthroom) may cause fire, overheating orelectric shock.
• Do not use or keep this product Inplaces of high heat that are directly
el(J)06&d to sunlight or near heat sources.This may cause fire ,
explosion, leakage, overheating or damage.
• Do not use thea product if something is covering it ( such as a blanket) .
•
Never modify oc disassemble this product.
• Do not attempt to use INs ctwgerwith anything other than an
Olympus Lithium ion battery .
• Be sure to use this product with the proper voltage (AC 100-240 V).
• Do not touch this product for too long when using it. This may cause a
serious low-temperature bum .
• Keep out of the reach of children. Do not let children use this product
withoutadiJtsupervision.
•
Do not charge the battery with Its+ and- terminals reWII'Hd.
•
Do not insert a wire or metal objects.
• Do not use the supplied power cord for other products.
INSTRUCTIONS
• If something appears to be wrong with the charger, such as an
abnormal odor, noise, or smoke, unplug the charger from the PC and
consult your oearett service center.
•
Do not put anything heavy on this product or leave It In an unstable
position or in a humid or dusty place.
• Do not charge a battery if you find something WI'Ong with It (such as
defonnity or leakage).
•
Do not shake the charger with the battery Inserted
• Do not charge continuously for mOfe than 24 hours. This may cause
fire, e:tplosion,leakageocoverheating.
• Do not touch the connectOI' between the cartridge and the battery
charger when the battery cartridge is removed
• When attaching the cartridge to the battery charger , make sl.l'e to push
the cartridge until itlocks on the beclt side.
HOW TO USE
• wtlen chlf9ing from a PC (IEJI
Connect the USB connector of the battery charger to an USB terminal
ofa
running PC
• =~ht~~3s":~!;::~l!!rger to the USBAC adapter(").
Then connect the USB AC adapter to the power con:1 and insert the
powerplugtotheoutlet .
·Supplied With the camera: F-2AC I Sold separately: F-3AC
Set securely the battery to the battery cartridge ( no float) with A l1'lllft a.s
showninlhefigure
Charge
indication lamp lights and charging starts.
When
the charge is completed, charge indication lampturns off.
Disconnect the
battery charger from the use terminal and remove the
battery from the battery cartridge•
. ....
When charge indication lamp does not light up Of flashes, the bettety/
charger or USBAC adapter may be broken or!he battery may not be
installed correctly.
• R.movwattach tt. batlllfy cartrklgt fill
Removing: Pull out the battery cartridge from the chalrgerwhile pushing
lhe "PUSW
button on the back aide.
Attaching:
Push tne battery cartridge until it locks MCUrefy in the battery
charger.
MAINTENANCE
To avoid damage ,dirt should be removed using a soft, dry doth.
Periodically
wipe ofl the positive and negative tefminals of the charger and
batterieswithadrycloth
Dirt build-up may ~tthe battery from being charged.
SPECIFICATIONS
UC-9:0
'""'
DC 5 V USB connector
0 DC 4.2 v400 rnA
Recommended temperature
~:~~~h~=
Supportedbatlefy
Chargin
time Approx. 240 minutes (U-908)"2
Dimensions
56mm•95mm•25mm
Weight
Approx. 59g
"1 Various batterie s can be used with optional battery cartridge.
"2 Charging time varies depending on the battery temperature.
Design and specifications are subject to change without notiCft.