Olympus CELON ELITE ESG-200 User manual

QUICK REFERENCE GUIDE
PROCEDURE SETTING RECOMMENDATION

2CELON ELITE QUICK REFERENCE GUIDE
This guide is designed as a quick reference guide only. It is not
a substitute for reading and learning the entire Operators Manual
and/or Instructions For Use (IFU) provided with the CELON ELITE.
Olympus cannot encourage or recommend any actions that deviate
or are not covered by the IFU.

CELON ELITE QUICK REFERENCE GUIDE 3
SYSTEM COMPONENTS
CELON ELITE
CelonProBreath
CelonProSleep plus
Procedure name
(blank if no procedure selected)
Output socket indicator
(bipolar/monopolar)
Neutral electrode indicator
“Mode” button
“Menu” button
“Foot Switch” button
Foot switch indicator
“Select Procedure” button
Autostart indicator
Wattage
CELON ELITE User Interface with Touchscreen
Main Components

4CELON ELITE QUICK REFERENCE GUIDE
ASSIGN FOOT SWITCH
STEP 1: Tap Foot Switch on the All Screen.
The Assign Foot Switch Screen is displayed.
STEP 2: Select the desired foot pedal (blue for
coagulation/yellow for cutting) in the bipolar
or monopolar plane. Tap Return to confirm the
settings. The All Screen is displayed.
All Screen
Assign Foot Switch Screen
Assign Foot Switch Screen

CELON ELITE QUICK REFERENCE GUIDE 5
CHANGE PROCEDURE SETTINGS
STEP 1: Tap on either the yellow or blue
mode button on the All Screen. The Mode
Screen is displayed.
STEP 2: Select the desired output mode
on the Mode Screen. Shown example:
Pure RFITT.
STEP 3: Set output power level by tapping
+ and - .
All Screen
Mode Screen
Set Screen

6CELON ELITE QUICK REFERENCE GUIDE
SAVE PROCEDURE SETTINGS
STEP 1: To save the current output
settings, tap Menu on the All Screen.
The Select Menu screen is displayed.
STEP 2: Tap Save Procedure in the
Select Menu screen.
STEP 3: Enter a name for the
procedure settings. Tap OK
to save the procedure name.
All Screen
Select Menu Screen
On-Screen Keyboard

CELON ELITE QUICK REFERENCE GUIDE 7
CELON PROCEDURE
SETTING RECOMMENDATION
Procedure RFITT Applicator Mode Power Setting
Volume reduction of hypertrophic turbinates* CelonProBreath Pure/Fine RFITT
15 W (adult)
18 W (smaller turbinates
e.g. children)
Soft palate stiffening* CelonProSleep Plus Pure RFITT 12 W
*Note: The higher the power setting, the smaller the coagulation volume. The optimal setting may vary depending on
the individual anatomy and the area of application. Please refer to the procedure guide for further information about
the treatment procedure.

8CELON ELITE QUICK REFERENCE GUIDE
CELON PROCEDURE
MODE OVERVIEW
Technique Effect Mode Max
Power
VPShort Explanation
Bipolar
Coag
Fine RFITT 40 W 250 Automatic end-of-procedure detection.
Audible feedback.
Pure RFITT 40 W 150 Automatic end-of-procedure detection.
Audible feedback.
Strong RFITT
(w. and w/o
RCAP)
40 W 260
Automatic deactivation when the tissue
resistance exceeds a limit value.
(Resistance-Controlled Automatic Power (RCAP)
to avoid premature tissue desiccation.)
Soft Coag 120 W 260 Little carbonization and adhesion.
Autostart selectable.
Cut
Fine Cut 120 W 470 Low spark intensity for small thermal effect.
Pure Cut 120 W 530 Medium spark intensity
for medium thermal effect.
Strong Cut 120 W 560 High spark intensity for large thermal effect.
Monopolar
Coag
Soft Coag 120 W 250 Little carbonization and adhesion.
Forced Coag 120 W 2000
Spark allows coagulation
also with relatively small electrodes.
Cut
Fine Cut 120 W
580 Low spark intensity for small thermal effect.
Pure Cut 120 W 630 Medium spark intensity
for medium thermal effect.
Strong Cut 120 W 680 High spark intensity for large thermal effect.
Pulse Cut 120 W 690 Intermittent cutting,
e.g. for endoscopic operations.

© 2017 Olympus America Inc. All rights reserved. Trademark and Registered Trademark of Olympus or its affiliated entities in the U.S. and/or other
countries of the world. For distribution in the U.S. and Canada only. Subject to change without notice. OAIENT0117QRG21263
Olympus America Inc. 136 Turnpike Road Southborough, MA 01772 USA
TEL: [phone] FAX: [phone] www.medical.olympusamerica.com
COMPATIBLE ACCESSORIES
Compatibility
Please be careful to
connect the banana plug
only to the rightmost
receptacle.
For bipolar HF cables
International Standard
2-pin plug
4 mm diameter
Erbe Standard
1-pin coaxial plug
8/4 mm diameter
International Standard
3-pin plug
4 mm diameter
Banana Plug
1-pin plug
4 mm diameter
Bovie Plug
1-pin plug
8 mm diameter
Split or Non-Split
Neutral Electrodes
Plugs with 2 sockets
2.5 mm socket diameter
Socket spacing 10 mm
For monopolar HF cables
Neutral
BIPOLAR
MONOPOLAR
NEUTRAL
Disclaimer: Any content or information (“Content”) presented herein is illustrative in nature and does not guarantee or represent specific information, outcomes, or results. Olympus Corporation, its
subsidiaries, affiliates, directors, officers, employees, agents, and representatives (collectively “Olympus”) does not represent to or warrant the accuracy or applicability of the Content. Under no circumstances
shall Olympus be liable for any costs, expenses, losses, claims, liabilities, or other damages (whether direct, indirect, special, incidental, consequential, or otherwise) that may arise from, or be incurred in
connection with, the Content or any use thereof.