Olympus E-M1 MARK II User manual

QUICK GUIDE
OM-D E-M1 Mark II

OM-D Visionary Victoria Rogotneva

FIRST STEPS
OM-D E-M1 Mark II
Overview // 04
Super Control Panel // 06
Card Settings and Playback // 07
Menu // 08
Custom Modes // 10
· Basic Settings // 11
· Reset of Custom Modes // 11

Overview
Headphone port
Microphone port
Diopter adjustment dial
HDMI port
USB port
One-touch white balance button
Preview button
Lens release button
External flash terminal
Live view button
Arrow pad
Fn lever + AEL/AFL button
Fn1 button
Playback button
04 // OM-D E-M1 Mark II
Info button
Erase button

HDR button
On/Off lever
Fn2 button
Front dial
Movie button
Rear dial
Mode dial
AF button
Focus clutch
Pushing forward reactivates AF
Pulling back activiates MF
L-Fn button
Front dial
Rear dial
B-Fn1 button
Vertical shooting lock
B-Fn2 button
QUICK GUIDE // 05

Super Control Panel
ISO settings
Image stabilisation movie
Shooting mode
Image stabilisation still images
Card settings Button function assignment
Autofocus menu
Picture mode settings
Activate the Super Control Panel by pressing the OK button. To change settings you only need to
choose one of the fields and turn the front dial. Choosing can either be done via touch, arrow pad
or rear dial. This works for all fields except for the button function assignment and SD card settings
which will need to be selected via the OK-button and will then take you to the menu to assign the
buttons with their desired function.
White balance
06 // OM-D E-M1 Mark II

Card Settings and Playback
Card Settings
Card settings allow you to choose from different
variations to save your files.
When two SD cards are used you can choose to
playback from which card by holding the playback
button and turning the front dial.
Playback Card Option
QUICK GUIDE // 07

Menu
08 // OM-D E-M1 Mark II
Shooting Menu 1
Preliminary and basic shooting options
Shooting Menu 2
Advanced shooting options
Video Menu
Dedicated for all movie settings

QUICK GUIDE // 09
Playback Menu
Preliminary and basic playback options
Custom Menu
Detailed camera settings
Setup Menu
Basic camera functions

Custom Modes
Custom Mode // C1 Custom Mode // C2 Custom Mode // C3
Aim Moving subject AF
Experience the feel of
tracking and capturing
fast-moving subjects
Pro Capture Mode
Experience the new
Pro Capture mode
feature
Low-light AF
Experience the feel of
capturing subjects even
in dimly-lit scenes
Shooting mode P P P
Image quality mode LN + RAW LN + RAW LN + RAW
AF mode C-AF S-AF S-AF
AF target ALL 5-point cross pattern 1-point
AF target display ON2 (Cluster display) ON1 ON1
Drive mode Sequential L ProCap H Sequential H
Frame rate (EVF) High speed High speed High speed
AF targeting pad ON ON ON
Live view boost (other) ON1 ON1 ON2
Line display Three-way split composition Reticle Three-way split composition
Display color (line display) White White White
The factory settings
of each custom mode
can be found above.
10 // OM-D E-M1 Mark II

Basic Settings
QUICK GUIDE // 11
To assign current camera settings
to a custom mode you need to
choose which custom mode the
current settings should be assigned
to. The menu is found in camera
menu 1.
Choose assign to custom mode. And select which custom mode the
current settings should be saved to.
When turning the programm wheel
to either C1, C2 or C3 saved settings
will be recalled.
Reset of Custom Modes
When resetting your camera there
are two options provided within
the reset menu.
The basic reset will only reset
functions that can be configured
using the super control panel.
The full reset affects all functions
except for date, language, copyright
info as well as lens info.

For further details please refer to the handbook or a regional representative of OLYMPUS.
http://download.aws.olympus.eu/consumer/manuals/cameras/E-M1_Mark_II_MANUAL_EN.pdf
00800 67 10 83 00 for the customer service hotline of OLYMPUS