Omron FLEXXPECT-PICKING User manual

FLEXXPECT-PICKING
FlexXpect is a modular Vision platform. In combination
with the powerful Xpectia hardware, it takes you into a new
dimension of specialisation.
FlexXpect-Picking delivers tailored functionality for accurate
positioning and alignment for high speed pick & place
applications.
Features of FlexXpect-Picking:
•Easy and guided setup using the Application Wizard
•Simple auto-calibration with the picker
•High speed cameras and positioning algorithm
•Simultaneous quality inspection
•EtherCat, EtherNet/IP, TCP/IP
Shape based object positioning:
Compensation of rounded or broken edgesDetection of partially hidden objectsSeparation of attached objects
Pharma
Flex pect
Flex pect
Glue Bead
Flex pect
Labelling
Flex pect
PV
Flex pect
Picking
Flex pect

FLEXXPECT-PICKING
Note: FlexXpect software modules require Xpectia/FZW hardware. This is not part of the item and needs to be ordered independently.
OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: [phone] Fax: [phone] www.industrial.omron.eu
CD_EN-01+FlexXpect-Picking+leaflet
Although we strive for perfection, Omron Europe BV and/or its subsidiary and affiliated companies do not warrant or make any representations regarding the correctness or completeness of the information described in this document. We reserve the right to make any changes at any time without prior notice.
Item description Order code
FlexXpect-Picking software module FLEXXPECT-Picking
Alignment and quality inspection in one system
Step : Select and teach the calibration target
Step : Teach the work piece
Step : Move the calibration target into defined positions and
create the calibration parameters automatically
Step : Start inspection
Inspection of scratches and defects Detection of dirty or overlapping objects Edge and corner breakage inspection
Easy setup and calibration: