One Forall URC-8011 User manual

INTRODUCTION
TheOneForAll8DeviceHomeTheaterUniversalRemoteControlis
designed to operate up to eighthomeentertainment devices, includ-
ingTV,video,and audio components.The remote controlrequires
two(2)newAAalkalinebatteries(notincluded)andeasyprogram-
mingtocontrolyourdevices.Forbestresults,please read and per-
formallinstructionslistedhere.Also,keeptheseinstructionsfor
future reference.
FEATURES AND FUNCTIONS
UsetheKeyCharts(below)tolearnhowtousetheuniversalfeatures
andfunctionsoftheOneForAll8DeviceHomeTheater Universal
RemoteControl.
Key Charts TheLED (redlight)blinkstoshowthat
theremotecontrolisworkingandis
sendingsignals.
Press TV,VCR,DVD,AUX,SAT,CBL,
RCVR/AMP,orCD once to select a desired
home entertainment device to control.
Afterprogramming,pressHOME THEATER
oncetoselectthehometheatermode(see
UsingTheHomeTheaterMode).
Press POWER once to turn on or off the
selecteddevice.
Press MENU oncetodisplayyourselected
device’smainmenu.
UseGUIDEtodisplayyourselected
device’s programguideorsetupmenu.
UseEXITtoexitfromyourselected
device’sguideormenu.
UseINFOtodisplaythecurrentchannel
andprograminformation.
Usethecursorkeystomovethecursorin
theprogramguideandmenuscreens.
UseSELECTtochooseoptionsfromyour
selected device’smenuorguide.
Inthe CD mode,useSELECT to selecta
compactdisc.Use▲(or▼)toselectthe
next(orprevious)CD.Use (or )to
selectthenext(orprevious)track.
Inthe RCVR/AMP mode,useSELECT to
setthesurroundsound.Use ▲(or ▼)
toadjustthevolumehigher(orlower).
Use (or ) to adjustthebalanceleft
(orright).
Use VOL+ (or VOL-) to raise (or lower)the
soundvolume.
Press MUTE once to turnthesound off
oron.
InTV,VCR,DVD,SAT,andCBL modes,use
FAV toscanfavoritechannelsand/or all
channels.SeeUsingChannelScanand
ProgrammingFavoriteChannelScan.
UseCH+(or CH-)toselectthenexthigher
(orlower)channel.
Press PREV once to recallthelast-viewed
channelandtopagebackonescreenon
themainmenu.
Inthe CD mode,usePREV to turn random
playon or off.
Inthe RCVR/AMP mode,usePREV to select
thereceiverband.
Usethekeypad(1~9 and0)todirectly
selectchannels(forexample,009or031).
Inthe RCVR/AMP mode,usethekeypad
(1~9 and0)toselectaudiosources1
through10.
Press ENTER once afterenteringthe
channelnumbersonsomeTVs.
Inthe CD mode,useENTER toadd10to
thedigitentry (e.g.,ENTER and7 is17).
UseTV/VIDtoswitchtheTV’s inputto
view TV or video programs.
Usethetransportkeystocontrolyour
VCR,DVD or CD player,orVOD(Video
On Demand) if available on your cable or
satelliteservice.
TorecordaVCRprogram,pressRECtwice.
Afterprogramming,pressMACRO onceto
runadesiredmacro(seeUsingAMacro).
UsePIPtoswitchthePicture-In-Picture
feature on or off (if available on your TV).
UseMOVEtomovethewindowpicture
todifferentpositionsin themainpicture.
UseSWAPtoswitchimagesandsound
betweenthemainandwindowpictures.
Press SLEEP to activateyourdevice’ssleep
timer(notavailableforalldevices).
Use to turn on oroff the key backlight.
Whenthisfeatureisactivated,keys will
remainbacklightfor5secondsafterthe
lastkeypress.
UseSETforallprogrammingsequences.
INSTALLING BATTERIES
1. On the remote control’s back,push the tab and lift off the
batterycover.
2. Obtaintwo(2)newAAAalkalinebatteries.Matchthe+and–
marksonthebatteriestothe+and–marksinthebatterycase,
theninsertthenewbatteries.
3. Pressthebatterycoverback into place.Thetabshouldclick
whenthecoverislocked.
4. TesttheremotecontrolbyfirstpressingPOWER andthenany
modekey(e.g.,TV).If batteries are insertedcorrectly,the LED
(redlight)willblinkonce.
NOTE:When batteries need replacement,the remotecontrolwillstop
operating. Removetheoldbatteriesand insertnewoneswithin30minutes
to ensure all of yourprogramming information is restored.
PROGRAMMING DEVICE CONTROL
TheOneForAll8DeviceHomeTheaterUniversalRemote Controlis
preprogrammedatthefactorytooperateanRCATVandVCR,a
Motorola(GI)cablebox,anRCAsatellite receiver,a Pioneer CD play-
er,a ToshibaDVDplayer,a Pioneer audioreceiver/amplifier,anda
OneForAllhomeautomationdevice.Tocontroldevicesother than
thedefaultbrands,perform the following steps;otherwiseskipthis
section:
NOTE:ForTV/VCRCombocontrol,see the nextsection.
1. Turn on adevice(e.g.,VCR orDVD player) and,if applicable,
insertmedia(e.g.,cassetteordisc).
NOTE:Pleasereadsteps2through4completelybeforeproceeding.
Highlightorwritedown the codes anddeviceyouwishtoprogrambefore
starting step 2.
2. Ontheremotecontrol,pressadevicekeyonce(i.e.,TV,VCR,DVD,
AUX,SAT,CBL,RCVR/AMP,orCD).
NOTE:Usethe AUX key to program controlof home automation devicesor
miscellaneousaudioservicesandvideoaccessories.Alternately,use the AUX
key to program controlof a second device type (e.g.,a second VCR;see “Re-
assigningDeviceKeys”).
3. PressandholdSET untiltheLED (redlight) blinks twice,then
releaseSET.
4. UsetheManufacturer’sCodes (on the back) to locate the type of
deviceandbrandnameand then enterthefirstfour-digitcode
for your device. If performed correctly,the LEDwillblinktwice.
NOTE: If the LED didnotblinktwice,repeatsteps2through4andtry
enteringthesamecodeagain.
5. AimtheremotecontrolatthedeviceandpressPOWER once.The
device should turn off.If it does notrespond,repeat steps 2
through5,tryingeachcodeforyourbranduntilyoufindonethat
works.If it still does not work,try SearchingForYourCode.
NOTE: If the device doesnothave a POWER key,pressthe ( Play )key.
6. Repeatsteps1through5foreachdeviceyouwanttocontrol.
Forfuturereference,writedowneachworkingdevicecodeinthe
boxesbelow:
TVCode:
VCRCode:
DVDCode:
SATCode:
CBLCode:
RCVR/AMPCode:
CDCode:
AUXCode:
Aux.Device Type:_______________________________
PROGRAMMING TV/VCR COMBO CONTROL
PerformthefollowinginstructionstocontrolaTV/VCRCombo:
1. TurnontheTV/VCRComboandinsertavideocassette.
NOTE:Pleasereadsteps2through4completelybeforeproceeding.
Highlightorwritedown the codes anddeviceyouwishtoprogrambefore
starting step 2.
2. Ontheremotecontrol,pressVCR.
3. PressandholdSET untiltheLED (red light) blinks twice,then
releaseSET.
4. UsetheSetupCodesForTV/VCRCombos(ontheback)tolocate
thebrandnameandthenenterthefirstfour-digitcodeforyour
device.If performed correctly,theLEDwillblinktwice.
NOTE: If the LED didnotblinktwice,repeatsteps2through4andtry
enteringthesamecodeagain.
5. AimtheremotecontrolatthedeviceandpressPOWER once.It
shouldturnoff.Ifthedevicedoesnotrespond,repeatsteps2
through5,tryingeachcodeforyourbranduntilyoufindonethat
works.If it still does not work,try SearchingForYourCode.
NOTE: If the device doesnothave a POWER key,pressthe ( Play )key.
6. If you’velocated a setupcodethatworks,butithasaseparate TV
code,you’llalsoneedtoprogramitintotheremotecontrolto
accessvolumecontrolasfollows:
a. PressTV once.TheLED(redlight)willblinktwice.
b. EntertheTVcodeforyour TV/VCRCombo.If correct,the
LEDwill blink twice.
NOTE:ForVCR/TVCombos programmedwithseparateTVcodes,
TVvolumeis controlledby pressing VCR firstandthen TV .Afterthat,use
VOL+ (or VOL- )toraise(or lower) the TVvolume.For otheralternativeson
controllingyourvolumekeys,see the“ChangingVolumeLock”or“Using
Keymover”sections.
7. Forfuturereference,writedowntheworkingTV/VCRcombo
codeinthebelowboxes:
TV/VCRCode:
TVCode (if used):
SEARCHING FOR YOUR CODE
If your device does not respond totheremote control after trying all
codes listed for yourbrand, orif your brand is not listed at all,try
searchingforyourcode.
Forexample,to searchforacodeforyourTV:
1. Ontheremotecontrol,pressTV once.
2. PressandholdSET untiltheLED(redlight)blinkstwice,then
releaseSET.
3. Enter 9- 9-1.TheLEDwillblinktwice.
4. AimtheremotecontrolatthetheTV and slowlyalternate
betweenpressingPOWER andTV.Stop when the TV turns off.
NOTE:Inthesearchmode, the remotecontrolwillsendIRcodesfromits
librarytotheselecteddevice,starting with themostpopularcodefirst.
5. Tolockinthecode,pressandholdSET untiltheLEDblinks
twice,thenreleaseSET.
6. To search for thecodes of yourother devices,repeat steps 1
through5,butsubstitutetheappropriatedevicekeyforthe
deviceyouaresearchingfor.
CHECKING THE CODES
If you have setuptheremote control using the SearchingForYour
Code procedure,you may need to find outwhichfour-digitcodeis
operatingyourequipment.Forexample,tofindoutwhichcodeis
operatingyourTV:
1. Ontheremotecontrol,pressTV once.
2. PressandholdSET untiltheLED(redlight)blinkstwice,then
releaseSET.
3. Enter 9- 9-0.The LED willblinktwice.
4. Toviewthecodeforthefirstdigit,press 1once.Wait 3 seconds,
countthe LED blinks (e.g.,threeblinks=3)andwritedown
thenumber.
NOTE: If a code digitis “0”, the LED willnotblink.
5. Repeatstep4threemoretimesforremainingdigits.Use2forthe
seconddigit,3forthethird digit, and 4forthefourthdigit.
6. To checkfor codes of other devices,repeat steps 1 through 5,
butsubstitutetheappropriatedevicekeyforeachdeviceyou
arechecking.
USING THE HOME THEATER MODE
The One ForAll8DeviceHomeTheaterUniversalRemoteControl
includesacustomHomeTheatermode.Afterthe HOME THEATER
keyisprogrammed,itwillallowyoutoaccessfivegroupsof
remotecontrol keys without having to change device modes.
Control Organization
About Control Groups
ForHomeTheaterprogramming,theremotecontrol’skeysare
grouped bytype of control into the following fivecontrol groups:
(1)TransportControls: PLAY,STOP,FWD,REW,PAUSE,andREC
(2)VolumeControls: VOL+,VOL-,andMUTE
(3)ChannelControls: CH+,CH-,(Keypad) 0~ 9,ENTER,LAST,
SLEEP,INFO,andTV/VCR
(4)MenuControls: MENU,GUIDE,Cursor Controls (Up,Down,
Left,Right),SELECT,andEXIT
(5)PIPControls: PIP,MOVE,andSWAP
About Device Groups
Moreover,the remotecontrol’sdevicesaregroupedintothefollowing
fivedevicegroups:
(1)DeviceGroup1: VCR,DVD,CD,andRCVR/AMP
(2)DeviceGroup2: TV,VCR,CBL,SAT,CD,andRCVR/AMP
(3)DeviceGroup3: TV,VCR,CBL,SAT,CD,andRCVR/AMP
(4)DeviceGroup4: TV,VCR,CBL,SAT,andDVD
(5)DeviceGroup5: TV
ThedefaultDeviceGroupsettingfromthefactoryis:
(1)DeviceGroup1: VCR
(2)DeviceGroup2: TV
(3)DeviceGroup3: CBL
(4)DeviceGroup4: CBL
(5)DeviceGroup5: TV
Programming The Home Theater Mode
Forexample,let’sassumeyouhaveaTV,a cable box,andaVCRin
yourhometheatersystem.YoucansetuptheHomeTheatermode
sothatselectedcontrolsareassignedtothesedevicesasfollows:
1. Ontheremotecontrol,pressHOME THEATER.
2. PressandholdSET untiltheLED (red light) blinks twice,then
releaseSET.
3. Enter9-7-9.TheLEDwill blink twice.
4. Selecta device.Forthisexample,pressVCR once.Then assigna
desiredControl Group to the device.For this example, pressPLAY
once,whichwillassigntheentiregroupofTransport Controls
(i.e.,PLAY,STOP,FWD,REW,PAUSE,andREC)totheVCR.TheLED
willblinkonce.
5. Select another device. Forthis example,pressTV once.Then
assign a desired Control Grouptothisdevice.Forthisexample,
pressVOL+ once,whichwillassignthe entiregroupofVolume
Controls (i.e.,VOL+,VOL-,andMUTE)totheTV.TheLED will
blinkonce.
6. Select another device. Forthis example,pressCBL once.Then
assign a desired Control Grouptothisdevice.Forthisexample,
pressCH+ once,whichwillassignthe entiregroupofChannel
Controls (i.e.,CH+,CH-,(Keypad)0~9,ENTER,LAST,SLEEP,
INFO,andTV/VCR)totheCableBox.The LED willblinkonce.
7. ToaddadditionalMenufunctionalitytotheCableBox,pressCBL
once. Then press MENU once.This actionwill assigntheentire
group of Menu Controls (i.e.,MENU,GUIDE,Cursor Controls(Up,
Down,Left,Right),SELECT,andEXIT)totheCableBox.The LED
willblinkonce.
8. ToaddPIPfunctionalitytotheTV,pressTV once.ThenpressPIP
once. This action will assign the entire group of PIPControls(i.e.,
PIP,MOVE,andSWAP)totheTV.TheLEDwillblinkonce.
9. ToexitHomeTheaterprogramming,press andholdSET untilthe
LED(redlight)blinkstwice,then release SET.
Operating The Home Theater Mode
AfterprogrammingtheHomeTheaterkey(seetheprevioussection),
yousimplyactivatethismodebypressingHOME THEATERonce.
Instantly,groupsof remotecontrolkeyswillbeassignedtotheir
programmed devices.
Fortheaboveexample,pressingHOMETHEATERoncewouldassign
thefollowingkeystotheVCR,TV,andCableBox:
VCR: PLAY,STOP,FWD,REW,PAUSE,andREC
TV: VOL+,VOL-,MUTE,PIP,MOVE,andSWAP
CableBox: CH+,CH-,(Keypad)0~9,ENTER,LAST,
SLEEP,INFO,TV/VCR,MENU,GUIDE,
Cursor Controls (Up,Down,Left,Right),
SELECT,andEXIT
USING A MACRO
Withprogramming,the MACRO key on yourOneForAll8Device
HomeTheaterUniversalRemoteControlcanbesetupto
performarepetitive,time-consumingoperationforeasy, convenient
access throughthepress of asinglekey.
Amacrocanbeusedtocontrolahometheateroperation,toseta
favoritechannel,or forothermultiplefunctionsyouwould liketo
controlwithonekeypress(seeexamplesbelow).Moreover,the
MACROkeycanholdupto15keypressestotal.
NOTE:Programminganewmacrooveranexisting one will erasethe
originalmacro.
Example – Programming A Favorite Channel
Withsomanychannelsavailablethroughyourcableorsatellite
systemprovider,you can program a macro that directlyselects a
favoritechannelwithonekeypress.
Forexample,let’sassumeyourfavoritecableprogramsareon
channel71.Usethefollowinginstructionstoprogramamacrofor
direct access of this channel:
NOTE:Thisexample assumestheTVtunerisconnecteddirectlytothe cable
lineandnotthroughacablebox.
1. PressandholdSETuntiltheLED(redlight)blinkstwice,then
releaseSET.
2. Enter9-9-5.TheLEDwill blink twice.
3. PressMACROonce.
4. PressTVonce.
5. Enterthechannelnumber,7-1.
NOTE: If you haveaccess to over 100 channels, enter 0 - 7 - 1 .Moreover,
if the or iginal remo te control required pre ssing an Enter key to change
thechannel,also press the
Enter keyafterthechannelnumber (e.g.,
0 - 7 - 1 - Enter ).
6. PressandholdSETuntiltheLEDblinkstwice,thenreleaseSET.
NowwhenyoupressMACRO,youwill instantlyseecablechannel71
onyourTVset.
Example – Programming A Master Power Key With Instant
Channel Selection
A macro canbeprogrammed to turn onandoff your equipment as
well.Forexample,let’ssetupasequencethatwill turn on the TV
andtuneittochannel3,andthenturnontheCableBoxandtuneit
toapremiumchannel(e.g.,11).
NOTE: Thisexample assumes all equipment is turned off and that theTV is
connectedthroughthecableboxwithTVtuningsetto channel 3.
1. PressandholdSET untiltheLED (red light) blinks twice,then
releaseSET.
2. Enter9-9-5.TheLEDwill blink twice.
3. PressMACROonce.
4. Enterthefollowingsequence:
TV,POWER,and0-3(or0-0-3if accessisover 100 channels)
NOTE: If the o riginal remo te control required pres sing an Enterkey to
changethechannel,alsopressthe Enter keyafterthechannelnumber (e.g.,
0 - 7 - 1 - Enter ).
5. Thenenterthefollowingsequence:
CBL,POWER,and1-1(or0-1-1if access is over 100 channels)
6. PressandholdSETuntiltheLEDblinkstwice,thenreleaseSET.
NowwhenyoupressMACROonce,theTVwillturnonandtuneto
channel03.Thenthecableboxwillturnonandtunetochannel11.
Clearing A Macro
1. PressandholdSET untiltheLED (red light) blinks twice,then
releaseSET.
2. Enter9-9-5.TheLEDwill blink twice.
3. PressMACROonce.
4. PressandholdSETuntiltheLEDblinkstwice,thenreleaseSET.
USING CHANNEL SCAN
Inthe TV,VCR,DVD,SAT,andCBLmodes,usetheFAV keytostarta
3-second scan of all favoritechannels (if programmed –see
ProgrammingFavoriteChannelScanbelow)and/orallchannelsfor
theselectedmode.
1. If FavoriteChannel Scan has beensetup, skiptostep 2.
Otherwise,pressTV,VCR,DVD,SAT,orCBL once.
2. PressFAV once.
•IfFavoriteChannelScanhas been set up,scanningof favorite
channelswill start and,uponcompletion,continue toscan all
channelsupwardforthe same device.
•IfFavoriteChannelScanhasnotbeensetup,scanningwill
startwiththecurrentchannel,thenproceedtothenext
channel up,and continue untilall channels of the selected
device is scanned.
3. Tostopscanningchannelsatanytime,press anykeyonce
(exceptthebacklightkey ).
PROGRAMMING FAVORITE CHANNEL SCAN
Inthe TV,VCR,DVD,SAT,orCBL mode, youcanstore a list of up to
10favoritechannels,in any order,that willbeimmediatelyscanned
whenFAV ispressed(seeUsingChannelScan).
NOTE: Only channels of one mode canbe stored for Favorite ChannelScan.
1. Ontheremotecontrol,pressTV,VCR,DVD,SAT,orCBL once.
2. PressandholdSETuntiltheLED(redlight)blinkstwice,then
releaseSET.
3. Enter9- 9-6.TheLEDwill blink twice.
4. Usethekeypadtoenterafavoritechannelnumber(e.g.,031).
ThenpressSETonce.
NOTE: If the o riginal remo te control required pres sing an Enterkey to
changethechannel,alsopressthe Enter keyafterthechannelnumber (e.g.,
0 - 3 - 1 - Enter ).
5. If desired,repeat step 4(in thissection)for each favorite channel
to be stored,uptoatotalof 10 channels.
NOTE: If you try entering more than 10channels, the remotecontrol will
automatically exit programming.
6. Toexitprogramming,pressandholdSETfor3seconds.The LED
will blink twice.
USING KEYMOVER
TheOneForAll8DeviceHomeTheaterUniversalRemoteControl
includesaKeymover featurethatallowsyoutomap(orcopy)keys
fromonemode(i.e.,sourcemode)toanothermode(i.e.,destination
mode).
NOTE:Thefollowingkeyscannotbeusedas a sourceordestination: TV , VCR ,
DVD , AUX , SAT , HOME THEATER , CD , CBL , RCVR/AMP ,and SET .
Programming Keymover
For example, if your VCR doesnothave volumecontrol, you can
mapthevolumeandmutekeysfromtheTVmodetotheVCRmode
asfollows:
1. PressandholdSETuntiltheLED(redlight)blinkstwice,then
releaseSET.
2. Enter9-9-4.TheLEDwill blink twice.
3. Forthesourcemode,pressTV once.
4. Forthesourcekey,press VOL+ once.
5. Forthedestinationmode,press VCR once.
6. Forthedestinationkey, pressVOL + once.
7. TheLEDwill blink twice indicating the keymovedsequence
iscorrect.
8. Repeatsteps1through7twicemore,substitutingVOL– and
MUTEassourceanddestinationkeysinsteps4and6.
Upon completion of theabove procedure,you can now use your
OneForAll8DeviceHomeTheaterUniversalRemoteControlto
controltheTV’svolumeand mute in theVCRmode,as well as in the
TVmode.
Restoring Keymoved Keys to Default Settings
Restoring A Single Keymoved Key
1. Pressadevicekeythathasakeymovedkey.
2. PressandholdSETuntiltheLED(redlight)blinkstwice,then
releaseSET.
3. Enter9-9-4.TheLEDwill blink twice.
4. Pressthedestinationkeytwice(wherethekeymovedkeyis
stored).The LED willblinktwice.
Restoring All Keymoved Keys In A Single Mode
1. PressandholdSETuntiltheLED(redlight)blinkstwice,then
releaseSET.
2. Enter9-9-4.TheLEDwill blink twice.
3. Pressthedestinationmodetwice(wherekeymovedkeysare
stored).The LED willblinktwice.
RE-ASSIGNING DEVICE KEYS
TheOneForAll8DeviceHomeTheaterUniversalRemoteControl
canbesettocontrolasecondTV,VCR,DVDplayer,or
other device.
Forexample,to controlaTV,acablebox,andtwoVCRs,youwill
needtore-assigntheunusedAUXkeytooperatethesecondVCR
asfollows:
1. Ontheremotecontrol,pressandholdSET untiltheLED(red
light)blinkstwice,thenreleaseSET.
2. Enter9- 9-2.TheLEDwill blink twice.
3. PressVCRonce,thenpressAUX once.
4. TheAUXkeyisnowreadytobeprogrammedforyoursecond
VCR.See ProgrammingDeviceControl.
Tore-assignotherdevicekeystotheAUXkey,repeatsteps1through4
abovebysubstitutingthesequencefromthebelowchart:
To Re-Assign Device Key Perform Sequence
AUX as2ndTV key: SET - 9 - 9- 2- TV - AUX
AUX as2ndDVDkey: SET-9 -9 -2
-DVD-AUX
AUX as2ndSATkey: SET - 9 - 9 - 2 -SAT-AUX
AUX as2ndCDkey: SET - 9 - 9 - 2 -CD-AUX
AUX as2ndCBLkey: SET - 9 - 9 - 2 -CBL-AUX
AUX as2ndRCVR/AMPkey: SET-9 -9-2-RCVR/AMP -AUX
Youcanalsore-sassignanotherunuseddevicekeybysubstitutingan
open key for theAUXkeyintheabovechartandperformingthe
sequence.Forexample,to re-assign an unused SATkeyasa2ndCD
key,perform SET - 9 - 9 -2
-CD-SAT .
Whenare-assignmentisdone,the LED (redlight)will blink twice to
confirmyourchoice.Atthattime,youwillneedtoprogramthe
remotecontrolforthenewdevice(seeProgrammingDeviceControl).
CHANGING VOLUME LOCK
TheOneForAll8DeviceHomeTheaterUniversalRemoteControlis
set at thefactory for independentvolume control of each selected
device.However,youmaychangetheVolumeLocksettingtoGlobal
VolumeLocksothatadevice’s volumewill belockedtoonemode
(e.g., tocontrol TV volumeinall other modes).After that, if desired,
youcanperformIndividualVolumeUnlockonaselecteddeviceto
setitsvolumecontrolforindependentoperation.
Locking Volume Control To One Mode (Global Volume Lock):
1. PressandholdSETuntiltheLED(redlight)blinkstwice,then
releaseSET.
2. Enter9-9-3andthenpressanymodekeyonce(e.g.,TV).The
LEDwill blink twice.
3. Now,whenyoupressVOL+,VOL–,orMUTE,the volume of the
selecteddevice(e.g.,TV) will becontrolledregardless of the
modeyouhaveselected.
Unlocking Volume Control For A Single Device (Individual
Volume Unlock):
1. AfterperformingGlobalVolume Lock (above),pressandhold
SETagainuntiltheLED(redlight)blinkstwice,thenreleaseSET.
2. Pressadesiredmodekeywhereyouwantvolumetobeunlocked
(e.g.,RCVR/AMP)andcontrolledwithinitsownmode.
3. Enter9-9-3andthenpressVOL– once.TheLEDwillblink
fourtimes.
4. If desired,repeat steps 1through 3 (of this section)for each
device that you want volumetobe unlocked.
5. Now,afteryouselectadevicethathasvolumeunlocked(e.g.,
RCVR/AMP),pressingVOL+,VOL–,orMUTE,will controlthe
device’svolume onlyinits own mode.
Unlocking All Volume Control (Restoring Default Setting):
NOTE:Performing these instructionswillrestoreindependent volume control
forallprogrammeddevices(e.g.,TV volume controlin TV mode,VCRvolume
in VCR mode,etc.).
1. Ontheremotecontrol,pressandholdSET untiltheLED(red
light)blinkstwice,thenreleaseSET.
2. Enter9-9-3andthenpressVOL+ once.TheLEDwillblink
fourtimes.
3. Volumewillagainbeindependentlycontrolledaccordingtoits
defaultstatesforall programmeddevices.
ABOUT UPGRADING
TheOneForAll8DeviceHomeTheaterUniversalRemoteControl
has the largestinfrared code library available. However,if you pur-
chaseabrandnewhomeentertainmentorhomeautomation
device,itmaynotrespondtothecodesstoredintheremotecon-
trol’s memory.
If this happens,please contact our Customer Support department
(seeCustomer Support below)toupgradetheremotecontrol.The
CustomerSupportrepresentativewill searchourentiredatabasefor
acode that matches your device andinstruct you how to enter it
intoyourOneForAll 8DeviceHomeTheaterUniversalRemote
Control.
Ifthecodeforyourhomeentertainmentorhome automationdevice
isnotinourdatabase,we willneedto“capture” thecodeforthat
device fromitsoriginalremotecontrol. A newcode wouldthenbe
createdandenteredintoyourOneForAll8 DeviceHomeTheater
UniversalRemoteControl.If necessary,theCustomerSupportrepre-
sentativecaninstructyouhowtobeginthecaptureprocedure.
NOTE:OneForAllreservestherighttoreplaceareturnedremote controlwith
a new one of equal or superior functionality.
Upgrade Exclusions
• Homeentertainmentorhomeautomationdevicescontrolledby
radiofrequency(RF/UHF),wired,or ultrasonic remotecontrols.
Onlydevicescontrolledbyinfraredremote controls are covered.
• Homeentertainmentorhomeautomationdevicesnotcontrolled
by remote controls.
• Brokenor defectiveproduct.
• Productsthatoperateover 100 kHz.
• Infraredkeyboardsandinfraredpointingdevices(suchas
mousesubstitutes).
• Allproductsforsaleand/oruseoutsidethecontinentalUnited
States,Hawaii,Alaska,orCanada.
TROUBLESHOOTING
PROBLEM: If you own asatellite thatuses code 0775 (Express Vu
andEchostar)andyourexitkeydoesnotwork,per-
form the followingsequence to activatethis
feature/function.
SOLUTION: 1. PresstheCBL/SATkey
2. PressandholdtheSETkeyuntiltheredLEDblinks
twice
3. Press9-9-4,theredLEDwill blink twice
4. PressSETandrelease(oneblinkonLED)
5. Press3-3-6
6. PresstheEXITkey,theredLEDwillblinktwice.
TheExitkeywillnowcorrectlyperformtheexitfea-
ture/functiononyoursatellite.
PROBLEM: LED(redlight)doesnotblinkwhenyoupressakey.
SOLUTION: Replacebatterieswithtwonew AA alkalinebatteries.
PROBLEM: LEDblinkswhenyoupressakey,buthome
entertainmentdevicedoesnotrespond.
SOLUTION: Makesuretheremotecontrolisaimedatyour
homeentertainmentdeviceandisnotfarther
than15feetaway.
PROBLEM: Theunitdoesnotcontrolhomeentertainmentdevices
orcommandsarenotworking properly.
SOLUTION: Tryalllistedcodesforthedevicebrandsbeing
setup.Makesuretheycanbeoperatedwithan
infrared remotecontrol.
PROBLEM: TV/VCRcombodoesnotrespondproperly.
SOLUTION: UsetheVCRcodesforyourbrand.Somecombo
unitsmayrequirebothaTVcodeandaVCR code
forfull operation.
PROBLEM: Changingchannelsdoesnotworkproperly.
SOLUTION: If original remote control required pressingENTER
tochange channels,pressENTER on the remote
controlafterenteringthechannelnumber.
PROBLEM: TriedSearchForYourCodemethodandstillcouldnot
findaworkingcode.
SOLUTION: Clearthedevicekeyasfollows:Pressandhold
SET untiltheLED(redlight)blinkstwice,then
release.Nextenter9-9-2.Thenpressthedevicekey
tobeclearedtwice.NowrepeattheSearchForYour
Code method.
PROBLEM: RemotecontroldoesnotturnonSonyorSharp
TV/VCRCombo.
SOLUTION: Forpoweron,these products requireprogramming
TVcodes.ForSony, useTVcode0000andVCR
code0032.ForSharp,useTVcode0093andVCR
code0048.
PROBLEM: CH+andCH-donotworkforyourRCATV.
SOLUTION: DuetoRCAdesign(1983-1987),onlytheoriginal
remotecontrolwill operatethesefunctions.
PROBLEM: Noremote control of volume.
SOLUTION: SeeChangingVolumeLocktolock/unlockvolume.
CUSTOMER SUPPORT
For assistance, pleasecontact us inany of the following ways:
•E-mail:[email protected]
•Internet: http://www.oneforall.com
• ConsumerHelpLine:[phone]
LIMITED WARRANTY
OneForAll® warrants,to the original purchaseronly,that this prod-
uctwill be free from defects in materialsand workmanship,under
normal use,for ninety (90) days fromthedateof original purchase.
ThislimitedwarrantyisvalidonlyonONEFORALL®productpur-
chasedandusedintheUnitedStatesofAmericaorCanada,and
doesnotapplytoproductsusedforindustrialorcommercialpur-
pose.
Thelimitedwarrantydoesnotcoverdamageorfailurecausedby
productsorservicesnotsuppliedbyONEFORALL® , or which
resultfromaccident,misuse,abuse,neglect,mishandling,misappli-
cation,faulty installation,set-upadjustment,impropermaintenance,
alterat ion,maladjustment of consumer controls, modifications, com-
mercial use,or that is attributable to acts of God.
Therearenoexpresswarrantiesexceptaslistedabove.ONE FOR
ALL®SHALLNOTBELIABLEFORINCIDENTALORCONSE-
QUENTIALDAMAGESRESULTINGFROMTHEUSEOFTHIS
PRODUCTORARISING OUT OF ANY BREACHOFWARRANTY.
ALLEXPRESSANDIMPLIEDWARRANTIES,INCLUDINGTHE
WARRANTIESOFMERCHANTABILITYANDFITNESSFORA
PARTICULARPURPOSE,ARE LIMITED TO THEWARRANTY
PERIODSETFORTHABOVE.Somestatesdonotallowtheexclusion
or limitationof incidental or consequential damages,or limitations
onhowlonganimpliedwarrantylasts,so the above exclusionsor
limitationsmaynotapplytoyou.This warrantygivesyouspecific
legalrightsandyoumayalsohaveotherrightswhichvary from
state to state.
Toobtainwarrantyserviceforadefectiveproductduringthewar-
rantyperiod,pleasereturntheproduct,preferablyintheoriginal
carton, along with your purchase receipt,tothe storeof original pur-
chase.A note detailing the complaintwouldbehelpful.The store,at
its option,will replace or repairthisproduct if foundtobe defective.
OneForAll
[phone]
ADDITIONAL INFORMATION
Asyouupdateyourhomeentertainmentsystem,One ForAll®has
auniversalremotecontrolthatwillfityourneeds.Look for these
excitingproductsataretailernearyou.
OneForAllAccess3..............................................................URC-3605
OneForAllVideo Expert 4 Device .......................................URC-4081
OneForAllVideo Expert Plus 4L .........................................URC-4880
OneForAllAccess4..............................................................URC-4605
OneForAllAccess5..............................................................URC-5705
OneForAll6DeviceHomeTheater.....................................URC-6011
OneForAll8DeviceHomeTheater.....................................URC-8011
OneForAll8LDeviceHomeTheater
withLearningCapability.......................................................URC-8811
OneForAllA/VLCD8DeviceWithLearning.....................URC-8910
OneForAllIR/RFLCD8DeviceWith Learning..................URC-9910
ONE FORALL®istheregistered trademark of UniversalElectronics
Inc.Computime InternationalLtd.is the Licensee of the ONE FOR
ALL®brandforUSAandCanada.
Copyright2002byUniversalElectronicsInc.Nopartof thispublication
maybereproduced,transmitted,transcribed,storedinanyretrieval
system,or translatedtoanylanguage,in any formorbyanymeans,
electronic,mechanical,magnetic,optical,manual,orotherwise,with-
outthepriorwrittenpermissionof UniversalElectronicsInc.
TheOneForAll®8DeviceUniversalRemoteControlis
compatibileforuseinNorthAmerica,excludingMexico.
URC-8011 02/02
▲
▲
▲
▲
S
U
R
R
O
U
N
D
S
O
U
N
D
S
U
R
R
O
U
N
D
S
O
U
N
D
8 DEVICE HOME THEATER
UNIVERSAL REMOTE CONTROL
USER’S GUIDE