One Forall Video Expert URC 4080 User manual

URC 4080/4081
VIDEO EXPERT
User’s Guide

INTRODUCTION
TheOneForAll®4-DeviceVideoExpertremotecontrol
isourlatest-generationuniversalremotecontrol,
designedspecificallyforcontrollingvideocomponents.
Its sophisticatedtechnology will allowyoutofinally
consolidatetheclutterof theoriginal remotecontrolsin
yourhomeentertainmentsystem.Moreover,it’spacked
witheasy-to-usefeaturessuchas:
• Preprogrammed technology foreasysetupof video
components inyourhomeentertainmentsystem
• PreprogrammableMasterPowerkeyformasteron/off
controlof all of yourequipmentwitha single keystroke
• AuniqueVideoConfigurationkeythatallowyou to
accesshometheaterkeysfromvariousmodeswithout
changingdevicemodes
• Keymover formapping(copying)keysfromonemode
toanother
• Menufunctiontonavigateandchooseon-screenmenu
itemsforaselectedcomponent
• User-programmedmacrokeys toperformrepetitive,
time-consumingoperationsforeasy,convenientaccess
throughthepress of asingle key
• Color-codedkeysto quickly locatepopularfunctions
• Code libraryfor video components
• Code Search to help program control of older or
discontinuedcomponents
Beforeusingyournewremotecontrol,youwillneedto
programittooperatethespecifichomeentertainment
componentsyouwishtocontrol.Pleasefollowthe
instructionsdetailedinthismanualandthenenjoyyour
newOne ForAll4-DeviceVideoExpert remotecontrol.
3
TABLE OF CONTENTS
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions. . . . . . . . . . . . . . . . . . . . . . 4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programming TV Control. . . . . . . . . . . . . . . . . . . . . 8
Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . 8
Programming VCR Control . . . . . . . . . . . . . . . . . . 12
Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . 12
Programming TV/VCR Combo Control . . . . . . . . 16
Setup Codes for TV/VCRs . . . . . . . . . . . . . . . . . . . 17
Programming Cable Converter or
Satellite Receiver Control . . . . . . . . . . . . . . . . . . . 18
Setup Codes for Cable Converters. . . . . . . . . . . . . 18
Setup Codes for Satellite Receivers. . . . . . . . . . . . 20
Programming DVD Player Control . . . . . . . . . . . . 21
Setup Codes for DVD Players. . . . . . . . . . . . . . . . . 22
Setup Codes for LD Players. . . . . . . . . . . . . . . . . . 22
Searching For Your Code . . . . . . . . . . . . . . . . . . . . 23
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . 24
Programming The Power Key . . . . . . . . . . . . . . . . 25
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . .26
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . 27
To Change Volume Lock to the CBL/SAT Mode . . . . 27
To Change Volume Lock to the VCR Mode . . . . . . . 27
To Change Volume Lock to the DVD Mode . . . . . . . 27
To Change Volume Lock Back to the TV Mode . . . . 28
To Unlock Volume Lock . . . . . . . . . . . . . . . . . . . . . 28
Using The Menu Key . . . . . . . . . . . . . . . . . . . . . . . 28
Using Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using Macros. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Programming a Favorite Channel . . . . . . . . . . . . . 30
Programming a Secondary Master Power Key . . . . 31
Clearing a Macro . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using The Video Configuration Mode . . . . . . . . . 32
An Example Video Configuration. . . . . . . . . . . . . . 33
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Additional Information. . . . . . . . . . . . . . . . . . . . . . 36
2

Key Charts
UseSET forallprogramming
sequences.
TheLED (redlight)blinkstoshow that
theremotecontrolisworkingandis
sendingsignals.
UseM.POWER tosetupand turnon(or
off)allyourvideocomponentswitha
singlekey.Also seepage25.
Press POWER oncetoturnon(oroff)
aselectedhomeentertainment
component.
Press TV,DVD,VCR,orCBL/SAT once
toselectahomeentertainmentvideo
componentto control.
UsetheF1, F2, F3, orF4 keys
toprogrammacros.Alsoseepage30.
UseEXIT toexitoutof yourcable
converter’smenuand guide.
Press MENU once todisplay the selected
component’s screen menu.Usethe VOL
+/- andCH +/- keys to navigate menus
andpresstheMUTE key to select items.
Press TV/VID toswitchviewing between
TVandvideosources.
UseVOL + (orVOL - )toraise (orlower)
thesoundvolume.
UseCH + (orCH
-
)toselectthenext
higher(orlower)channel.
Press MUTE/SELECT once toturnsound
off oron.Also,use MUTE/SELECT to
selectitemsfromtheselected
component’sscreen menu after
pressing MENU once.
After pressing MENU,usetheCursor
Keystomove thecursorintheprogram
guideandmenuscreens.
continuedonnextpage...
5
FEATURES AND FUNCTIONS
UsetheillustrationbelowtolocateOneForAll4-Device
VideoExpertremotecontrolfeaturesandthenstudytheKey
Charts(onthenexttwopages)tolearnhowtheyfunction.
4

FEATURES AND FUNCTIONS
Key Charts (Continued)
Press PIP oncetovieworturnoff the
picture-in-picturefeature.
Press SWAP oncetoexchangethePIP
withthemainTVpicture.
UseMOVE tothepicture-in-picture
positionontheTV screen.
Press SLEEP oncetoenable(ordisable)
aselected component’ssleep timer
(if available).
UseDISPLAY toviewa selected
component’sinformation on the TV.
Usethekeypad(0~9)todirectlyselect
channels(e.g.,09or31).
Press ENTER once afterentering
channel numbersonsomeTV
models.
Press PREV.CH oncetorecallthe
last-viewedchannel.
UseV.CONFIG tocustomprogramand
recallvideoconfigurationmodesfor
hometheateruse.Alsoseepage32.
IntheTV,DVD,orVCR mode,usethe
FWD SCAN,REW SCAN,PLAY,STOP,and
PAUSE keys to control yourVCR or DVD
(orLD)player.Torecordaprogramon,
theVCR,press REC twice.
67
INSTALLING BATTERIES
1. Onthebackoftheremotecontrol, pressthe
recessandslidethebatterycoveroff (seeabove).
2. Obtaintwo(2)fully-chargedAAalkaline
batteries.Matchthe+and–marks onthe
batteriestothe+and–marksinthebattery
case,theninsertthenewbatteries.
3. Alignthecoverkeys withthecase openings
andslidethecoveronuntilitlocks.
4. TesttheunitbypressingPOWER andanymode
key(e.g.TV,DVD,VCR,orCBL/SAT).If batteries
areinsertedcorrectly,theLEDwillblinkonce.
NOTE:Whenbatteriesneedreplacement,theOneForAll
4-DeviceVideoExpertremotecontrolwillceasetooperate.Simply
replacethebatteriesandtheunitwillberestoredtoitsfullfunc-
tionality,complete with yourfavorite settings.
❶
❷
❸

Ampro 0751
Anam 0180
Audiovox 0451,0180,0092,0623
Baysonic 0180
Belcor 0019
Bell&Howell 0154
Bradford 0180
Brockwood 0019
Broksonic 0236,0463
CXC 0180
Candle 0030,0056
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451,0092
Citizen 0060,0030,0056,0039,0092
Concerto 0056
Contec 0180
Craig 0180
Crosley 0054
Crown 0180,0039
CurtisMathes 0047,0054,0154,0051,0451,0093,0060,0030,0145,0056,
0039,0166,0466,1147,1347
Daewoo 0451,0019,0039,0092,0623,0624
Daytron 0019
Denon 0145
Dumont 0017,0019
Dwin 0720,0774
Electroband 0000
Emerson 0154,0236,0463,0180,0178,0019,0179,0039,0177,0623,
0624
Envision 0030
Fisher 0154
Fujitsu 0179,0683
Funai 0180,0179,0171
Futuretech 0180
GE 0047,0051,0451,0093,0178,0135,1147,1347
Gibralter 0017,0030,0019
GoldStar 0030,0178,0019,0056
Gradiente 0053,0056
Grunpy 0180,0179
Hallmark 0178
HarleyDavidson 0179
Harman/Kardon 0054
Harvard 0180
Hitachi 0145,0056,0151
Infinity 0054
Inteq 0017
JBL 0054
JCB 0000
JVC 0053 continuedonnextpage...
9
PROGRAMMING TV CONTROL
NOTE: If youown aTV/VCR combination,skipthis sectionand
perform“ProgrammingTV/VCRComboControl”on page16.
Locatethe brand nameof yourTV intheSetupCodesFor
TVssectionbelow,and writeit inthefollowingspace.
TV Brand: __________________________________
Thebrandsarelistedinalphabeticalorderwiththemost
popularcodeslistedfirst.ToprogramTV control:
1. TurnontheTV.
2. Ontheremotecontrol,pressTV once.Press and
holdSET untiltheLED blinkstwice,then
releaseSET.
NOTE:Theremotecontrolwill exitprogrammingif
more than10secondselapsebetweenkeypresses.
3. Enterthefirstfour-digitcodeforyourTV. If
youperformthisprocedurecorrectly,theLED
willblinktwice.
NOTE: If the LEDemitsa long blink,thecodeis
invalid.Repeatsteps2through3andtryenteringthe
samecodeagain.
4. AimtheremotecontrolatyourTVandpress
POWER once.TheTVshouldturnoff.Ifitdoes
notrespond,repeatsteps2-3,tryingeachcode
foryourbranduntilyoufindonethatworks.If
itstilldoesnotwork,trysearchingforthecode
(seeSearchingForYourCodeonpage23).
5. WriteyourTVcodeintheboxesbelowfor
futurereference.
NOTE:Remember,tousetheOneForAll4-DeviceVideoExpert
remotecontrol tooperate yourTV,pressTV first.
Setup Codes for TVs:
AOC 0030,0019,0052
Admiral 0093,0463
Aiko 0092
Akai 0030
Alaron 0179
Ambassador 0177
AmericaAction 0180
8

Sansei 0451
Sansui 0463
Sanyo 0154
Scimitsu 0019
Scotch 0178
Scott 0236,0180,0178,0019,0179
Sears 0047,0054,0154,0156,0178,0179,0056,0171
Semivox 0180
Semp 0156
Sharp 0093,0165,0039
Shogun 0019
Sony 0000
Soundesign 0180,0178,0179
Squareview 0171
Starlite 0180
Supreme 0000
Sylvania 0054,0030
Symphonic 0171
TMK 0178,0056,0177
Tandy 0093
Technics 0051,0250
TechnolAce 0179
Techwood 0051,0056
Teknika 0054,0180,0150,0060,0019,0179,0056,0039,0092
Telefunken 0056
Tera 0031
Toshiba 0154,0156,0060,1256
Totevision 0039
VectorResearch 0030
Victor 0053
Vidikron 0054
Vidtech 0178,0019
Wards 0054,0165,0030,0178,0019,0179,0056
WhiteWestinghouse 0463,0623,0624
Yamaha 0030,0019
Zenith 0017,0463,0092,0624
11
PROGRAMMING TV CONTROL
Setup Codes for TVs (Continued):
KEC 0180
KTV 0180,0030,0039
Kaypani 0052
Kenwood 0030,0019
LG 0056
LXI 0047,0054,0154,0156,0178
Luxman 0056
MGA 0150,0030,0178,0019
MTC 0060,0030,0019,0056
Magnavox 0054,0030,0179,1254
Marantz 0054,0030
Matsushita 0250
Megatron 0178,0145
Memorex 0154,0250,0463,0150,0178,0056
Midland 0047,0017,0051,0039,0135
Mitsubishi 0093,0150,0178,0019
Motorola 0093
Multitech 0180
NAD 0156,0178,0166
NEC 0030,0019,0056
NTC 0092
Nikko 0030,0178,0092
Onwa 0180
Optimus 0154,0250,0166
Optonica 0093,0165
Orion 0236,0463,0179
Panasonic 0051,0250
Penney 0047,0156,0051,0060,0030,0178,0019,0056,0039,0135,
1347
Philco 0054,0463,0030,0145,0019
Philips 0054
Pilot 0030,0019,0039
Pioneer 0166
Portland 0019,0039,0092
Prism 0051
Proscan 0047
Proton 0178,0031,0052,0466
Pulsar 0017,0019
Quasar 0051,0250,0165
RCA 0047,0051,0093,0019,0090,0135,1047,1147,1247,1347,
1447
RadioShack 0047,0154,0165,0180,0030,0178,0019,0056,0039
Realistic 0154,0165,0180,0030,0178,0019,0056,0039
Runco 0017,0030
SSS 0180,0019
Sampo 0030,0039,0052
Samsung 0060,0030,0178,0019,0056
Samsux 0039
10

13
PROGRAMMING VCR CONTROL
NOTE: If youown aTV/VCR combination,skipthis sectionand
perform“ProgrammingTV/VCRComboControl”on page16.
Locatethebrandnameof yourVCR inthe SetupCodesFor
VCRssectionbelow,andwriteitinthefollowingspace.
VCR Brand: __________________________________
Thebrandsarelistedinalphabeticalorderwiththemost
popularcodeslistedfirst.ToprogramVCR control:
1. TurnonyourVCRandinsert a videocassette.
2. Ontheremotecontrol,pressVCR once.Press
andholdSET untiltheLEDblinkstwice,then
releaseSET.
NOTE:Theremotecontrolwill exitprogrammingif
more than10secondselapsebetweenkeypresses.
3. Enterthefirstfour-digitcodeforyourVCR.If
youperformthisprocedurecorrectly,theLED
willblinktwice.
NOTE: If the LEDemitsa long blink,thecodeis
invalid.Repeatsteps2through3andtryenteringthe
samecodeagain.
4. AimtheremotecontrolatyourVCRandpress
POWER once.TheVCR shouldturn off.If your
VCR remote control does not have a POWER
key,press PLAY.If theVCR doesnotrespond,
repeatsteps2-3,tryingeachcodelistedforyour
branduntilyoufind onethat works.If theVCR
stilldoesnotwork,trysearchingforthecode
(seeSearchingForYourCodeonpage23).
5. WriteyourVCRcodeintheboxesbelowfor
futurereference.
NOTE:Remember,tousetheOneForAll4-DeviceVideoExpert
remotecontrol tooperateyourVCR,pressVCR first.
Setup Codes for VCRs:
Admiral 0048,0209
Adventura 0000
Aiko 0278
Aiwa 0037,0000
Akai 0041
12
AmericaAction 0278
AmericanHigh 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell&Howell 0104
Broksonic 0184,0121,0209,0002,0479
CCE 0072,0278
Calix 0037
Canon 0035
Carver 0081
Cineral 0278
Citizen 0037,0278
Colt 0072
Craig 0037,0047,0240,0072,0271
CurtisMathes 0060,0035,0041,0162
Cybernex 0240
Daewoo 0045,0278
Denon 0042
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 0037,0184,0000,0121,0043,0209,0002,0278,0479
Fisher 0047,0104
Fuji 0035,0033
Funai 0000
GE 0060,0035,0048,0202,0240
Garrard 0000
GoVideo 0526
GoldStar 0037,0038
Gradiente 0000
HI-Q 0047
HarleyDavidson 0000
Harman/Kardon 0081,0038
Harwood 0072
Hitachi 0000,0042,0041
HughesNetwork 0042
JVC 0067,0041
Jensen 0041
KEC 0037,0278
KLH 0072
Kenwood 0067,0041,0038
Kodak 0035,0037
LXI 0037
Lloyd's 0000
Logik 0072
MEI 0035
MGA 0240,0043
MGNTechnology 0240
MTC 0240,0000 continuedonnextpage...

15
PROGRAMMING VCR CONTROL
Setup Codes for VCRs (Continued):
Magnasonic 0278
Magnavox 0035,0039,0081,0000,0149
Magnin 0240
Marantz 0035,0081
Marta 0037
Matsushita 0035,0162,0454
Memorex 0035,0037,0048,0039,0047,0240,0000,0104,0209,0454,
1037,1162,1262
Minolta 0042
Mitsubishi 0048,0067,0043
Motorola 0035,0048
Multitech 0000,0072
NEC 0104,0067,0041,0038
Nikko 0037
Noblex 0240
Olympus 0035
Optimus 0037,0048,0104,0162,0454,1048,1062,1162,1262
Orion 0184,0209,0002,0479
Panasonic 0035,0162,0225,0454,0616,1062,1162,1262
Penney 0035,0037,0240,0042,0038
Pentax 0042
Philco 0035,0209,0479
Philips 0035,0081,0618
Pilot 0037
Pioneer 0067
Profitronic 0240
Proscan 0060,0202
Protec 0072
Pulsar 0039
Quasar 0035,0162,0454,1162
RCA 0060,0035,0048,0240,0042,0149,0202
RadioShack 0000,1037
Radix 0037
Randex 0037
Realistic 0035,0037,0048,0047,0000,0104
ReplayTV 0614,0616
Runco 0039
STS 0042
Samsung 0240,0045
Sanky 0048,0039
Sansui 0000,0067,0209,0041,0271,0479
Sanyo 0047,0240,0104
Scott 0184,0045,0121,0043
Sears 0035,0037,0047,0000,0042,0104
Semp 0045
Sharp 0048
Shintom 0072
Shogun 0240
14
Singer 0072
Sony 0035,0032,0000,0033
Sylvania 0035,0081,0000,0043
Symphonic 0000
TMK 0240
Tatung 0041
Teac 0000,0041
Technics 0035,0162,0202
Teknika 0035,0037,0000
Thomas 0000
Tivo 0618
Toshiba 0045,0043
Totevision 0037,0240
Unitech 0240
Vector 0045
VectorResearch 0038
VideoConcepts 0045
Videosonic 0240
Wards 0060,0035,0048,0047,0081,0240,0000,0042,0072,0149
WhiteWestinghouse
0209,0278
XR-1000 0035,0000,0072
Yamaha 0038
Zenith 0039,0000,0209,0033,0479

6. WriteyourTV/VCRCombocodein theboxes
belowforfuturereference.
NOTE:Remember,tousetheOneForAll4-DeviceVideoExpert
tooperateyourTV/VCRCombo,pressVCR first.
Setup Codes for TV/VCR Combos:
Brocksonic 0002,0479 (TV:0463)
Citizen 0278
Colt 0072
CurtisMathes 0035(TV:0051)
Daewoo 0278(TV:0624)
Emerson 0002,0479(TV:0463),0278(TV:0624)
Funai 0000
GE 0060(TV:0047),0048(TV:0093),0035 (TV:0051),0240
GoldStar 0037(TV:0056)
HarleyDavidson 0000
Hitachi 0000
Lloyd's 0000
Magnasonic 0278
Magnavox 0000,0081 (TV:0054)
Magnin 0240
Memorex 1162,1262,0162(TV:0250),0037 (TV:0056),1037
MGA 0240
Mitsubishi 0048(TV:0093)
Optimus 1162,1262,0162(TV:0250)
Orion 0002,0479(TV:0463)
Panasonic 1162,1262,0162(TV:0250),0035(TV:0051)
Penney 0037(TV:0056),0035(TV:0051),0240
Quasar 0162(TV:0250),0035(TV:0051)
RadioShack 1037
RCA 0060(TV:0047),0048(TV:0093),0035 (TV:0051),0240
Sansui 0000,0479(TV:0463)
Sanyo 0240
Sears 0000,0037(TV:0056)
Sharp 0048(TV:0093)
Sony 0032(TV:0000)
Sylvania 0081(TV:0054)
Symphonic 0000
Thomas 0000
WhiteWestinghouse 0278(TV:0624)
Zenith 0000,0479(TV:0463)
17
PROGRAMMING TV/VCR COMBO CONTROL
Locatethebrandnameof yourTV/VCR Combointhe
SetupCodesForTV/VCRCombossectiononthenextpage,
andwriteitinthefollowingspace.
TV/VCR Combo Brand:________________________
Thebrandsarelistedinalphabeticalorderwiththemost
popularcodeslistedfirst.ToprogramTV/VCRcontrol:
1. TurnonyourTV/VCRComboandinserta
videocassette.
2. Ontheremotecontrol,pressVCR once.Press
andholdSET untiltheLEDblinkstwice,then
releaseSET.
NOTE:Theremotecontrolwill exitprogrammingif
more than10secondselapsebetweenkeypresses.
3. Enterthefirstfour-digitcodeforyourTV/VCR
Combo.If you performthisprocedurecorrectly,
theLEDwillblinktwice.
NOTE: If the LEDemitsa long blink,thecodeis
invalid.Repeatsteps2through3andtryenteringthe
samecodeagain.
4. AimtheremotecontrolatyourTV/VCRCombo
andpressPOWER once.Theunitshouldturn
off.If itdoes notrespond,repeatsteps2-3,try-
ingeachcodelistedforyourbranduntilyou
findonethatworks.If itstilldoesnotwork,try
searchingforthecode(seeSearchingForYour
Codeonpage23).
5. Ifyou’velocatedaTV/VCRsetupcodethat
worksyourTV/VCRComboandaseparateTV
codeisalsolisted,you’llneedtoprogramthis
codeintothe remotecontroltoaccessvolume
control(seeProgrammingTVControlonpage8).
If thereis noseparateTV codelisted,you will
needtoperformthefollowingstepstoaccess
volume control:
a. PressandholdSET untiltheLEDblinks
twice,thenreleaseSET.
b. Enter 9 -9 - 3.TheLEDwill blinktwice.
c. PressVCR once.TheLEDwillblinktwice.
16

Archer 0153,0022,0797
Belcor 0056
Bell&Howell 0014
BellSouth 0899
CableStar 0056
Cabletenna 0022
Cableview 0022
Century 0153
Citizen 0153,0315
ColourVoice 0025
Comtronics 0040
Contec 0019
Digi 0637
Eastern 0002
Emerson 0797
Everquest 0015,0040
Focus 0400
GCElectronics 0056
Garrard 0153
Gemini 0015,0797
GeneralInstrument 0476,0276,0011,0810
GoldStar 0144,0040
Goodmind 0797
Hamlin 0020,0259,0009,0034
Hitachi 0011
Hytex 0007
Jasco 0015,0153,0315
Jerrold 0003,0012,0476,0276,0014,0015,0011,0810
Linsay 0440
Memorex 0000
MovieTime 0063
NSC 0063
Novaplex 0618
Oak 0019,0007
Optimus 0021
Panasonic 0000,0107,0021
Panther 0637
Paragon 0000
Philips 0153,0025
Pioneer 0144,0533,0877
Popular Mechanics
0400
Pulsar 0000
Quasar 0000
RCA 0021
RadioShack 0015,0315,0797,0883
Recoton 0400
Regal 0020,0259
Regency 0002
Rembrandt 0011
Runco 0000
SLMarx 0040 continuedon nextpage...
19
PROGRAMMING CABLE CONVERTER OR
SATELLITE RECEIVER CONTROL
Locatethe brand nameof yourCable Converter orSatellite
Receiverinthesetupcodessectionstartingbelow,and
writeitintheappropriatespace.
CableConverterBrand: ________________________
or
Satellite ReceiverBrand:________________________
Thebrandsarelistedinalphabeticalorderwiththemost
popularcodeslistedfirst.Toprogramcomponentcontrol:
1. Turnonthe CableConverterorSatelliteReceiver.
2. Ontheremotecontrol,pressCBL/SAT once.
Press and hold SET untiltheLED blinkstwice,
thenreleaseSET.
NOTE:Theremotecontrolwill exitprogrammingif
more than10secondselapsebetweenkeypresses.
3. Enterthefirstfour-digitcodeforyourCable
ConverterorSatelliteReceiver.If performed
correctly,theLEDwill blinktwice.
NOTE: If the LEDemitsa long blink,thecodeis
invalid.Repeatsteps2through3andtryenteringthe
samecodeagain.
4. AimtheremotecontrolatyourCableConverteror
SatelliteReceiverandpressPOWER once.Theunit
shouldturnoff.Ifitdoesnotrespond,repeatsteps
2-3,tryingeachcodelistedforyourbranduntil
youfindonethatworks.Ifitstilldoesnotwork,
trysearchingforthecode(seepage23).
5. Writeyour CableConverterorSatelliteReceiver
codeintheboxesbelowforfuturereference.
NOTE:Remember,tousetheOneForAll4-DeviceVideoExpert
remotecontrol tooperateyourCable Converter or Satellite
Receiver,press CBL/SAT first.
Setup Codes for Cable Converters:
ABC 0003,0008,0014,0017,0007,0011,0013
Allegro 0153,0315
Americast 0899
Antronix 0022
18

PROGRAMMING DVD PLAYER CONTROL
Locatethebrandnameof yourDVD (or LD)playerin the
SetupCodesForDVDs(or LDs)sectiononthenextpage,
andwriteitinthefollowingspace.
DVD (or LD) Brand: __________________________
Thebrandsarelistedinalphabeticalorderwiththe
mostpopularcodeslistedfirst.ToprogramDVD(orLD)
player control:
1. TurnonyourDVD (orLD)player.
2. Ontheremotecontrol,pressDVD once.
Press and hold SET untiltheLED blinkstwice,
thenreleaseSET.
NOTE:Theremotecontrolwill exitprogrammingif
more than10secondselapsebetweenkeypresses.
3. Enterthefirstfour-digitcodeforyourDVD(or
LD)player.If youperformthisprocedure cor-
rectly,theLED willblinktwice.
NOTE: If the LEDemitsa long blink,thecodeis
invalid.Repeatsteps2 through3andtry enteringthe
samecodeagain.
4. AimtheremotecontrolatyourDVD(orLD)
playerandpressPOWER once.Theunitshould
turnoff.If yourDVD (orLD) playerremote
controldoesnothaveaPOWERkey,press
PLAY.If theDVD (orLD) playerdoesnot
respond,repeatsteps2-3,tryingeachcodelist-
edforyourbranduntilyoufindonethatworks.
If theDVD (orLD) player stilldoesnot work,
trysearchingforthecode(seeSearchingFor
Your Code onpage23).
5. WriteyourDVD (orLD)playercodeinthe
boxesbelowforfuturereference.
NOTE:Remember,tousetheOneForAll4-DeviceVideoExpert
remotecontrol tooperateyourDVD(orLD)player,pressDVD first.
21
PROGRAMMING CABLE CONVERTER OR
SATELLITE RECEIVER CONTROL
Setup Codes for Cable Converters (Continued):
Samsung 0144,0040
ScientificAtlanta 0008,0477,0017,0877
Signal 0015,0040
Signature 0011
Sprucer 0021
Starcom 0003,0015
Stargate 0015,0040,0797
Starquest 0015
TV86 0063
Tandy 0258
Teleview 0040
Timeless 0418
Tocom 0012,0013
Toshiba 0000
Tusa 0015
Unika 0153,0022
UnitedArtists 0007
Universal 0153,0022,0056,0191
Viewstar 0063,0258
Zenith 0000,0525,0899
Zentek 0400
Setup Codes for Satellite Receivers:
AlphaStar 0772
Echostar 0775,1005
Expressvu 0775
GeneralInstrument
0627,0361,0869
HTS 0775
Hitachi 0819
HughesNetwork 0749
JVC 0775
Jerrold 0627,0361
Magnavox 0724,0722
Memorex 0724
NextLevel 0869
Panasonic 0701
Philips 0724,0722
Primestar 0627,0361
RCA 0566,0143,0392,0855
RadioShack 0869
Sony 0639
StarChoice 0869
Toshiba 0790
Uniden 0724,0722
Zenith 0856
20

23
SEARCHING FOR YOUR CODE
If yourvideo component doesnot respondtotheOne For
All4-DeviceVideoExpert remotecontrolaftertryingall
of thecodeslistedforyourbrand,or if yourbrandis not
listedatall,try searchingforyourcode.
Forexample,tosearchforacodeforyourTV:
1. TurnonyourTV.
2. Ontheremotecontrol,pressTV once.
Press and hold SET untiltheLED blinkstwice,
thenreleaseSET.
3. Enter9-9 -1.TheLEDwillblinktwice.
4. AimtheremotecontrolatthetheTVandslow-
lyalternatebetween pressingPOWER andTV.
StopwhentheTVturnsoff.
NOTE:Inthesearchmode,theOneForAll4-Device
VideoExpertremotecontrolwillsendIR codesfrom
itslibrarytotheselectedcomponent,startingwiththe
mostpopularcodefirst.
5. PressSET oncetolockin thecode.
6. Tosearchforthe codesof yourothercompo-
nents,repeat steps1through5,butsubstitute
theappropriatekey(i.e.,DVD,VCR,orCBL/SAT)
forthe(DVD/LD,VCR,orCable/Satellite)com-
ponent youaresearchingfor.
PROGRAMMING DVD PLAYER CONTROL
(Continued)
Setup Codes for DVD Players:
Denon 0490,0634
GE 0522
Harman/Kardon 0582
JVC 0558,0623
Kenwood 0534
Magnavox 0503
Marantz 0539
Mitsubishi 0521
Onkyo 0503,0627
Optimus 0571
Panasonic 0490,0632
Philips 0503,0539
Pioneer 0525,0571,0632
Proscan 0522
RCA 0522
Samsung 0573
Sharp 0630
Sherwood 0633
Sony 0533
Technics 0490
ThetaDigital 0571
Toshiba 0503
Yamaha 0490,0545
Zenith 0503,0591
Setup Codes for LD Players:
Aiwa 0203
Denon 0059,0172
Funai 0203
Mitsubishi 0059
NAD 0059
Optimus 0059
Panasonic 0204
Pioneer 0059
Quasar 0204
Realistic 0203
Sony 0193,0201
Technics 0204
22

2524
PROGRAMMING THE MASTER POWER KEY
FOR ALL ON/OFF
WiththeOne ForAll 4-DeviceVideoExpert,youcan
program theM. POWER keytoturnyourTV,VCR,DVD,
andCable(orSatellite)componentsonand off withthe
press of onebutton.
1. Ontheremotecontrol,pressandholdSET
untiltheLEDblinkstwice,thenreleaseSET.
2. Enter9-9 -5.TheLEDwillblinktwice.
3. PressM.POWER once.
4. Enterthefollowingsequence*:
a. PressTV once.
b. Press VCR once.
c. PressDVD once.
d. PressCBL/SAT once.
5. Press and hold SET untiltheLED blinkstwice,
thenreleaseSET.
6. Now,whenyoupressM.POWER once,the
remote control will direct power to your TV,
VCR,DVD(orLD)player,andCable/Satellite
componentandleave theremotecontrolin the
TVmode.
* NOTE: If youdonotwant allof yourequipmentto powerup
allof thetime,youcanshortenstep4toincludeonlythose
devicesyou want toturn onor off.Forexample,to just power
upyourTVandDVD (orLD)player,enterthefollowing
sequencefor step 4:
a. PressTV once.
b. Press DVD once.
Now when you press M.POWER once,the One ForAll 4-Device
VideoExpertremotecontrolwill onlydirectpowertoyour
DVD(orLD) playerandTV,andstillleavethe remotecontrol
inthe TV mode.
CHECKING THE CODES
If youhaveset uptheOne ForAll 4-DeviceVideoExpert
remote control using the SearchingForYourCodeproce-
dure,youmayneedtofindoutwhichfour-digitcodeis
operatingyour equipment.Forexample,tofind outwhich
codeisoperatingyourTV:
1. TurnonyourTV.
2. Ontheremotecontrol,pressTV once.
Press and hold SET untiltheLED blinkstwice,
thenreleaseSET.
3. Enter9-9 -0.TheLEDwillblinktwice.
4. Toviewthecodeforthefirstdigit,press1once.
Count thenumberof LED blinks(e.g.,3blinks
=3)andwritedownthenumberintheleft-
mostTV Codeboxbelow.
NOTE: If a code digit is“0”,theLED will notblink.
5. Repeatstep4threemoretimesforremaining
digits.Use2 fortheseconddigit,3forthethird
digit,and4forthefourthdigit.Finishwriting
downthecodeintheTVCodeboxesbelow.
6. Tocheckforthecodesof yourothercompo-
nents,repeat steps1through5,butsubstitute
theappropriatekey(i.e.,DVD,VCR,orCBL/SAT)
forthe(DVD/LD,VCR,orCable/Satellite)com-
ponent youarechecking.Writedownthecodes
intheappropriateboxesbelow.
TV Code
DVD (or LD) Code
VCR Code
Cable/Satellite Code

2726
CHANGING VOLUME LOCK
TheOneForAll4-DeviceVideoExpertremotecontrolis
preset tocontrolthe volumeof acomponentthrough
yourTV.
If yourTV isnotremotecontrollable,orif youwouldlike
thevolume tobecontrolledbyadifferentcomponent,you
canchangetheVolumeLocksettingtocontrolavolume
throughanon-associatedmode(e.g.,throughthecable in
theTVmode).
To change Volume Lock to the CBL/SAT mode:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -3andthenpressCBL/SAT once.
TheLED will blinktwice.
3. Now,wheneveryoupressVOL +,VOL –,or
MUTE on the remote control,the volume will be
controlledbyyourCableConverterorSatellite
Receiver.
To change Volume Lock to the VCR mode:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -3andthenpressVCR once.
TheLED will blinktwice.
3. Now,wheneveryoupressVOL +,VOL –,or
MUTE on the remote control,volume will be
controlledbyyourVCR.
To change Volume Lock to the DVD mode:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -3andthenpressDVD once.
TheLED will blinktwice.
3. Now,wheneveryoupressVOL +,VOL –,or
MUTE on the remote control,volume will be
controlledbyyourDVD(orLD)player.
RE-ASSIGNING DEVICE KEYS
TheOneForAll4-DeviceVideoExpert remotecontrol
canbe setuptocontrolasecondTV orVCR,oranycom-
binationof fourvideo components.Forexample,tohave
theunitcontrolaTV,a CableConverter,andtwoVCRs,
youwill needtore-assign the unusedDVD key to operate
thesecondVCR asfollows:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -2.TheLEDwillblinktwice.
3. PressVCR once,thenpressDVD once.TheLED
willblinktwice.
4. ProgramtheDVD keyasasecondVCR.See
ProgrammingVCRControlonpage12.
Tore-assignotherdevicekeys,repeatsteps1through4by
substitutingthekeysequencefrom thefollowingchartfor
adesiredcomponent:
To Re-Assign Perform Key Sequence
VCR as2ndTVkey: SET -9 -9 - 2- TV - VCR
VCR as2ndDVD key: SET-9 -9 -2-DVD -VCR
VCR as2ndCbl/Satkey: SET-9 -9 -2-CBL/SAT -VCR
VCR backtoVCR:SET -9 -9 -2-VCR - VCR
DVD as2ndTVkey: SET -9 -9 - 2- TV - DVD
DVD as2ndVCRkey: SET -9 -9 -2-VCR - DVD
DVD as2nd Cbl/Sat key: SET-9 -9 -2-CBL/SAT -DVD
DVD backto DVD : SET-9 -9 -2-DVD -DVD
CBL/SAT as 2nd TVkey: SET -9 -9 -2-TV - CBL/SAT
CBL/SAT as 2nd DVD key: SET - 9 - 9 -2-DVD -CBL/SAT
CBL/SAT as 2ndVCRkey: SET-9 -9 -2-VCR -CBL/SAT
CBL/SAT backtoCBL/SAT: SET-9 -9 -2-CBL/SAT-CBL/SAT
Uponcompletionofare-assignment,theLEDwillblink
twicetoconfirmyourselection.Atthattime,youwillalso
needtoprogramtheremotecontroltocontrolthenewcom-
ponent(seeprevioussectionsonProgrammingVCRControl,
ProgrammingCableConverterorSatelliteReceiverControl,or
ProgrammingDVDPlayerControl).

2928
USING KEYMOVER
TheOneForAll4-DeviceVideoExpertremotecontrol
includesaKeymoverfeaturethatallowsyoutomap(or
copy)keysfromonemode(i.e.,sourcemode)toanother
(i,e,destinationmode).
NOTE:Thefollowingkeyscannot bemapped:TV,DVD,VCR,
CBL/SAT,SET,M.POWER,V.CONFIG,andmacrokeysF1~F4.
For example,if yourVCR does nothavevolumecontrol,
youcanmapthevolumeand mutekeysfromtheTV
mode to theVCR modeas follows:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -4.
3. Forthesourcemode,pressTV once.
4. Forthesourcekey,pressVOL + once.
5. Forthedestinationmode,pressVCR once.
6. Forthedestinationkey,pressVOL +once.
TheLED will blinktwiceindicatingthekey-
movedsequenceis correct.
7. Repeatsteps1through6twicemore,
substitutingVOL – and MUTE as sourceand
destinationkeys insteps4and6.
Uponcompletionof theabove procedure,youcannow
useyourOne ForAll4-DeviceVideoExpertremotecon-
trol to control the TV’s volume and mute in theVCR
mode,aswellasin theTVmode.
CHANGING VOLUME LOCK (Continued)
To change Volume Lock back to the TV mode:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -3andthenpressTV once.
TheLED will blinktwice.
3. Now,wheneveryoupressVOL +,VOL –,or
MUTE on the remote control,volume will be
againcontrolledbyyourTV.
To Unlock Volume Lock:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -3andthenpressVOL+ once.
TheLED will blinktwice.
USING THE MENU KEY
OnyourOne ForAll4-DeviceVideoExpertremotecon-
trol,theMENUkeyworksjustliketheMENU key of your
originalremotecontrolandallowsyoutoaccesstheon-
screenmenuof thecomponentyouhaveselected (e.g.,TV,
VCR,DVD,orCBL/SAT).
WhenyoupressMENU,theVOL+,VOL–,CH+,andCH–
keys willallowyoutonavigateandadjusttheonscreen
menusettingsjustlikeyouwouldwithyouroriginal
remote control.Also,the MUTE keybecomestheMenu
Selectkey.
To exit out of the Menu mode, press MENUorEXIT to
return to normal operation.

Programming A Secondary Master Power Key
With Instant Channel Selection
JustliketheM.POWER key,any F keycanbeprogrammed
toturnonand off yourequipment.Asan example,you
wantyourchildtobeabletoeasilyturnontheequipment
andselectafavoritepremiumchannel.Youcansetupa
sequenceusingtwo macrosononeF key–thefirst
macrowillturnontheTV andtuneittochannel3,and
thesecondmacrowillturnontheCableBoxandtuneit
toadesiredchannel(e.g.,11).
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -5.TheLEDwillblinktwice.
3. SelectanopenF key(e.g.,F2)andpress
itonce.
4. Enterthefollowingsequence:
TV,
POWER,and
0-3 (or0-0-3if accessis over100channels)
5. PressandholdSET untiltheLEDblinkstwice,
thenreleaseSET.
6. Repeatsteps1through5,butthistimein
step4 enterthefollowingsequence:
CBL/SAT,
POWER,and
1-1 (or0-1-1if accessis over100channels)
Nowwhenyou pressF2 once,theTVwillturnonand
tunetochannel03.WhenyoupressF2 onceagain,the
CableBoxwillturnonandtunetochannel11.
Clearing A Macro
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -5.TheLEDwillblinktwice.
3. SelectanF key(e.g.,F1~F4)youwanttoclear
andpressitonce.
4. PressandholdSET untiltheLEDblinkstwice,
thenreleaseSET.
3130
USING MACROS
Withprogramming,theF1 throughF4 keysonyourOne
ForAll4-DeviceVideoExpertremotecontrolcanbesetup
toperformrepetitive,time-consumingoperationsforeasy,
convenientaccessthroughthepressof asinglekey.
TheF keysareidealforhometheateroperations,settinga
favoritechannel,addingtomultiplecomponentuses,
guidesteps,orothermultiplefunctionsyouwouldliketo
controlwithonekeypress.
Fortheoptimuminindividualcustomization,youcan
defineand programasequenceof events,sinceeachF
keycanholduptothreemacrosor12keypressestotal.
Belowareafewexamplestogetyoustarted.
NOTE:Programminganewmacrooveranexistingonewill erase
theoriginalmacro.
Programming A Favorite Channel
Withsomanychannelsavailablethroughyourcable
systemorsatelliteprovider,youcanprogramamacro
thatdirectlyselectsafavoritechannelwithonekeypress.
For example,let’sassumeyourfavoritecableprograms
areonchannel71.Use thefollowinginstructionstopro-
gramanF keyfordirect accessof this channel:
1. Ontheremotecontrol,pressandholdSET until
theLED blinkstwice,thenreleaseSET.
2. Enter9-9 -5.TheLEDwillblinktwice.
3. Selectanopen Fkey(e.g.,F1)andpress
itonce.
4. Press TVonce.
5. Enterthechannelnumber,7 -1.
NOTE: If youhave access to over100 channels,enter
in071.
6. PressandholdSET untiltheLEDblinkstwice,
thenreleaseSET.
Nowwhenyou pressF1,youwillinstantlyseecable
channel71onyourTVset.

3332
USING THE VIDEO CONFIGURATION MODE
TheOneForAll4-DeviceVideoExpert remotecontrol
includesapowerfulVideoConfigurationfeature that
allowsyouto combinethemostusedfunctionsof your
Audio/VideoequipmentintooneV.CONFIG mode.The
featuresyoucancombineareorganizedintofivegroups
andcanbedefinedbyspecificmodesasfollows:
Function Groups
•Function Group1 – TransportKeys (Play,Stop,Fast
Forward,Rewind,Pause,Record,Forward Scan,and
Rewind Scan)
•Function Group2 –VolumeKeys (Volume Up,Volume
Down,andMute)
•Function Group3 –ChannelKeys(ChannelUp,
ChannelDown,Digits0-9,Enter,PreviousChannel,
Sleep,and Display)
•Function Group4 –MenuKeys(Menu,Up,Down,Left,
Right,andSelect)
•Function Group5 –PIPKeys(Picture-In-Picture,Swap,
andMove)
Component(Mode)Groups
•ComponentGroup1–VCR andDVD
•ComponentGroup2–TV,VCR,andCable/Sat
•ComponentGroup3–TV,VCR,andCable/Sat
•ComponentGroup4–TV,VCR,Cable/Sat,andDVD
•ComponentGroup5–TV,VCR,andCable/Sat
ToenabletheVideoConfigurationfeature,you’llneedto
performthefollowingprogrammingsequence:
1. Ontheremotecontrol,pressV.CONFIG once.
2. PressandholdSET untiltheLEDblinkstwice,
thenreleaseSET.
3. Enter9-7 -9.TheLEDwillblinktwice.
At this point,you’ll assign Component Groupsto Function
Groupsuptofivetimes,dependingonhowmanycombi-
nationsyou need.Youcan performanyof thefollowing
stepsinanyorder,aslongasyoufinishthesequencewith
step9.
4. Selectakeyfrom ComponentGroup1(i.e.,VCR
orDVD)andpressitonce.PressPLAY to assign
Function Group1 (i.e.,thetransport keys).The
LEDwillblinktwice.
5. Selectakeyfrom ComponentGroup2(i.e.,TV,
VCR,orCBL/SAT)andpressitonce.PressVOL+
toassign Function Group2(i.e.,thevolume
keys).TheLEDwillblinktwice.
6. Selectakeyfrom ComponentGroup3(i.e.,TV,
VCR,orCBL/SAT)andpressitonce.PressCH+
toassign Function Group3(i.e.,thechannel
keys).TheLEDwillblinktwice.
7. Selectakeyfrom ComponentGroup4(i.e.,TV,
DVD,VCR,orCBL/SAT)andpressitonce.Press
MENUtoassign Function Group4(i.e.,the
menukeys).TheLED willblinktwice.
8. Selectakeyfrom ComponentMode Group5
(i.e.,TV,VCR,orCBL/SAT)andpressitonce.
Press PIP toassignFunctionGroup5(i.e.,the
PIPkeys).TheLEDwillblinktwice.
9. TolockintheVideoConfiguration,pressSET
untiltheLEDblinkstwice,thenreleaseSET.
An Example Video Configuration
Fromonemode,you wouldliketoplay yourDVD,usethe
Volume control on the TV,change channels on your Cable
Box,controltheMenuontheCableBox,andusethePIP
featureof yourTV. To program thisVideoConfiguration
youwouldperformthefollowingsteps:
1. Ontheremotecontrol,pressV.CONFIG once.
2. PressandholdSET untiltheLEDblinkstwice,
thenreleaseSET.
3. Enter9-7 -9.TheLEDwillblinktwice.
4. PressDVD onceandthenpressPLAY.TheLED
willblinktwice.
...continuedonnextpage

35
USING THE VIDEO CONFIGURATION MODE
An Example Video Configuration (Continued)
5. PressTV onceand then pressVOL+.TheLED
willblinktwice.
6. PressCBL/SAT onceandthenpressCH+.The
LEDwillblinktwice.
7. PressCBL/SAT onceandthenpressMENU.The
LEDwillblinktwice.
8. PressTV onceand then pressPIP.TheLEDwill
blinktwice.
9. TolockintheVideoConfiguration,pressSET
untiltheLEDblinkstwice,thenreleaseSET.
34
TROUBLESHOOTING
PROBLEM: LEDdoes notblinkwhenyoupressakey.
SOLUTION: Replacethebatterieswithtwo(2)newAA
alkalinebatteries(seepage7).
PROBLEM: LEDblinks whenyoupressa key,buthome
entertainmentcomponentdoesnotrespond.
SOLUTION: Makesureyouareaimingtheremotecontrolat
yourhomeentertainmentcomponentand that
youarewithin15 feetof thecomponent youare
trying to control.
PROBLEM: Theremotecontroldoesnotcontrolhomeenter-
tainmentcomponents orcommandsarenot per-
formingproperly.
SOLUTION: Try alllistedcodesforthecomponentbrand
beingsetup. Makesureall components canbe
operated with aninfrared remote control.
PROBLEM: TV/VCRcombodoesnotrespondproperly.
SOLUTION: UsetheVCRcodesforyourbrand. Somecombo
unitsmayrequirebothaTVcodeandaVCR
codeforfulloperation(seepage16).
PROBLEM: Novolumeona secondTV.
SOLUTION: FollowinstructionsinChangingVolumeLock
(seepage27).
PROBLEM: CH+ ,CH– ,andPREV.CH donotworkforyour
RCATV.
SOLUTION: DuetoRCAdesign(1983-1987),onlytheoriginal
remotecontrolwilloperatethesefunctions.
PROBLEM: Changingchannelsdoes notworkproperly.
SOLUTION: If originalremotecontrolrequired pressing
ENTERtochangechannels,pressENTER on the
remotecontrolafterentering achannelnumber.
PROBLEM: Tried“SearchMethod”andstillcouldnotfinda
working code.
SOLUTION: Forhelp,callourtechnicalsupportgroupat
1-330-405-8608onanybusinessday,between
9A.M.and5P.M.,EST.
PROBLEM: Remotecontroldoesnotturn onSonyorSharp
TV/VCR Combo.
SOLUTION: Forpower on,theseproductsrequireprogram-
ming TV codes on the remote control.For Sony,
useTV code0000andVCRcode0032.ForSharp,
useTV code0093andVCR code0048.

ADDITIONAL INFORMATION
TheOneForAll4-DeviceVideoExpert remotecontrol
doesnothaveanyuser-serviceableparts.Openingthe
case,exceptforthebatterycover,maycausepermanent
damagetoyourremotecontrol.
©2000byUniversal ElectronicsInc.No part of thispubli-
cationmaybe reproduced,transmitted,transcribed,
storedinanyretrievalsystem,ortranslatedtoanylan-
guage,inanyformorbyanymeans,electronic,mechani-
cal,magnetic,optical,manual,orotherwise,withoutthe
priorwrittenpermissionof UniversalElectronicsInc.
OneForAll®isa registeredtrademark of Universal
ElectronicsInc.
PartNo.URC4080 7/00