One Forall URC 7880 User manual

URC 7880
ENGLISH SIMPLE SET UP GUIDE
WELCOME, PREPARE YOUR
REMOTE FOR INSTALLATION
Open the battery door.
Insert 4 AAA batteries.
ENGLISH

KEY TABLE
INPUT
DEVICES – Scroll through
the devices your remote
is set up to control MAGIC – Used to set up
your remote
POWER – Power on/o
DELIMITER –
Selects Sub Channels
BACK – Back one step
in the Menu of the
current device
ACTIVITY – Scrolls
through up to 5
Activity Modes –
Watch TV, Watch
Movie, Listen to
Music, Play Game and
Custom. See Activities
for details.
EXIT – Exit from the
Menu of the current
device
VOL – Volume Up, Down
and Mute
MENU – Shows the menu
of the current device
GUIDE – TV Guide, EPG
HOME –
Select the Home Menu
+/- – Channel Up and
Down
PP – Previous
Program, Last Channel
APP Shortcut Keys –
See‘App Shortcut
Feature’
Red, Green, Yellow,
Blue – Fastext/Quick
access keys
PLAYBACK – Playback
keys for the current
device
APPS - Brings up
the Applications Menu
INPUT – Select the input
on the current device

A  SIMPLESET
SimpleSet is a quick and easy way of setting up the remote to control the most popular
brands of each device type with only a few key presses, typically in under a minute per
device. The first step is to select which device you are going to set up. The following is a list
of Device Modes on the remote control, and the Device types that can be set up on that
mode:
Device Mode Type of device
TV TV, HDTV, LED, LCD, Plasma, Projector
STB Set Top Box, Satellite Receiver, Cable Converter,
Freeview, DVB-T, IPTV
BLU Blu-ray, DVD, DVD Home Cinema, VCR, Laser Disk
AUD Audio, AV Receiver, Amplifier, Tuner
DVD DVD, DVD Home Cinema, Blu-ray, VCR, Laser Disk
GAME Game Console*, Digital Media Receiver, Streamer
MEDIA Digital Media Receiver, Streamer, Game Console*
S. BAR Sound Bar, Active Speaker System
* The One For All remote can only control games consoles operated by Infra-Red, either
directly or via an adapter. Consoles that are controlled by Bluetooth only cannot be
operated.
For each Device type, there is a list of the top brands, each with a number assigned to it,
for example 5 for a Samsung TV. Locate your device and brand in the list that follows:
Thank you for purchasing the One For All Smart Control.
Now you can control all of your Audio/Video devices with a single remote, while enjoying
extra features such as the ability to combine devices in a single Activity Mode, sending
multiple commands on a single key press (macros) and being able to customise the
remote control to your exact requirements.
There is also a handy companion app for iPhone and Android phones which will allow
you to keep your remote up to date with the latest devices and codes. It also offers you an
alternative way to set up your remote.
To get started with your new remote, the first step is to set it up to control all of your
Home Cinema devices.
HOW TO SET UP YOUR REMOTE

A  SIMPLESET
TV
1 Hisense
2 LG
3 Panasonic
4 Philips, Magnavox
5 Samsung
6 Sharp
7 Sony
8 TCL, RCA
9 Toshiba
0 VIZIO
AUD – AV Receiver, Amp, Tuner
1 Bose
2 Denon
3 Harman/Kardon
4 Marantz, Philips
5 Onkyo, Integra
6 Pioneer
7 RCA
8 Samsung
9 Sony
0 Yamaha
STB – Sat, Cable, DVB-T
1 AT&T, DIRECTV, Sky Mexico
2 Bell, Bell MTS
3 Charter, Spectrum, Time Warner
Cable, Bright House Networks
4 Comcast, Xfinity
5 Cox Communications
6 DISH Network, Dish Mexico
7 Optimum, Suddenlink
8 Shaw, Shaw Direct
9 TiVo
0 Verizon, Frontier
BLU, DVD – Blu-ray, DVD
1 Insignia
2 LG
3 Panasonic
4 Philips, Magnavox
5 Pioneer
6 Samsung
7 Sharp
8 Sony
9 Toshiba
0 Yamaha
HOW TO SET UP YOUR REMOTE

To set up your device
1.
Turn on your device (not on standby) and point the OFA remote towards it.
2. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode key will stay lit.
3. Press the DEVICES key repeatedly until the LED for the device you
want to set up is lit.
4. Hold down the digit for your brand and device as listed above
(e.g. 5 for Samsung TV).
5. The remote will send Power every 3 seconds until your device switches off.
6. As soon as your device switches off, release the digit.
7. The LED will blink twice and go out. The remote should now operate
your device.
* If you find one or more keys do not work as you expect, start again at step 1 – the remote will start with the next
code in the memory.
A  SIMPLESET
GAME, MEDIA – Games Consoles (5 & 8), Media Players
1 Apple
2 D-Link
3 Microsoft
4 Netgear
5 NVIDIA
6 Roku
7 Sling Media
8 TiVo
9 Western Digital
0 Xiaomi
S. BAR – Sound Bar, Speaker Systems
1 Bose
2 JBL, ZVOX
3 LG
4 Panasonic
5 Philips, Magnavox
6 Sonos, RCA
7 Samsung
8 Sony
9 VIZIO
0 Yamaha
HOW TO SET UP YOUR REMOTE

B  SET UP BY CODE
If your brand is not listed in section A, you can set up your device by trying codes
individually. To do this:
1. Turn your device on (not on standby).
2. Locate the brand of your device in the code list (included).
Codes are listed by Device Type and Brand.
3. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode key will stay lit.
4. Press the DEVICES key repeatedly until the LED for the device you
want to set up is lit.
5. Enter the first 4 digit code listed for your brand (e.g. 2049 for
an Insigna TV).
6. The LED will blink twice and go out.
7. Now aim the remote towards your device and press the POWER key.
8. If the device turns off, your remote is ready to use. If not, repeat steps 3-7
with the next code in the list.
* Some codes are quite similar. If you find that one or more keys do not operate as you expect, try again from step 3
with the next code in the list.
HOW TO SET UP YOUR REMOTE

Your One For All remote control can learn any function from any other working remote
control. This can be useful if you are missing one or more functions from your original
remote control and would like to add them to the Smart Control. You can learn onto any
key except Magic, Devices or Activity.
You can also learn a complete device if you can’t find a code.
To learn, firstly make sure you have all your original remote controls to hand, and that they
have working batteries in. To learn functions, the original remote should be
approximately 3cm from the OFA remote, pointing towards it as shown below:
1. Hold down MAGIC until the LED under the device blinks twice.The LED
under the current mode key will stay lit.
2. Using the DEVICES key, make sure the LED for the device you want to learn
functions on is lit.
3. Press 975 – the LED will blink twice.
4. Press and release the key you want to learn a function onto (for example
the A key) –The WatchTV, Listen To Music and Custom LEDs will light up.
5. Press and release the key on the original remote.
6. The LED will blink twice to indicate the key has been learned correctly.
7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple
remotes, but only one function per key.
8. When you learned all the functions you require, press and hold the MAGIC
key until the LED blinks twice and turns off.
Hints
• If the LEDs shows one long blink at step 6, the function was not learned correctly, please try again
from step 4.
• If you find one or more keys don’t work properly after set up, you can re-enter the learning mode
at any time by repeating the procedure from step 1.
LEARNING
2 - 5 CM
GUIDE
INPUT

An Activity is a grouping of two or more devices into a single mode based upon what
you’re doing while using your remote - for example TV and Set Top Box can be combined
together into a Watch TV mode. In this mode keys will control only the relevant device, so
in this example the Volume keys would control the TV, but the channel keys would control
the Set Top Box.
The OFA Smart Control features 5 Activity Modes; Watch TV, Watch Movie, Listen To Music,
Play Game and Custom. Each of these modes has a choice of devices to combine.
These are:
WATCH TV
Combination 1: TV + STB (Default)
Combination 2: TV + STB + AUD
Combination 3: TV + AUD
Combination 4: TV + S.BAR
Combination 5: TV + STB + S.BAR
WATCH MOVIE
Combination 1: TV + BLU (Default)
Combination 2: TV + BLU + AUD
Combination 3: TV + DVD
Combination 4: TV + DVD + AUD
Combination 5: TV + BLU + S.BAR
Combination 6: TV + DVD + S.BAR
LISTEN TO MUSIC
Combination 1: TV + AUD + MEDIA (Default)
Combination 2: TV + S.BAR + MEDIA
Combination 3: TV + AUD + BLU
Combination 4: AUD only
Combination 5: S.BAR only
TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode key will stay lit.
2. Using the DEVICES key, make sure the LED for the device you want
to delete functions from is lit.
3. Press 976 – the LED will blink twice.
4. Press the key to delete twice – the LED will blink twice.
Repeat the above procedure for each key you want to delete.
LEARNING
ACTIVITIES

PLAY GAME
Combination 1: TV + GAME (Default)
Combination 2: TV + GAME + AUD
Combination 3: TV + GAME + S.BAR
CUSTOM
Combination 1: TV + MEDIA (Default)
Combination 2: TV + MEDIA + AUD
Combination 3: TV + MEDIA + S.BAR
Combination 4: TV + GAME
Combination 5: TV + GAME + AUD
Combination 6: TV + GAME + S.BAR
If you set up the default devices for any Activity on the remote (for example a TV and STB
for Watch TV) that Activity will be set up automatically on the remote. If you would like to
change to a different combination, the procedure is as follows:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode key will stay lit.
2. Use the ACTIVITY key to scroll through the Activities until the
one you want to set is flashing.
3. Press the number of the combination you want to set – e.g 2
for TV + STB + AUD in Watch TV.
4. The LED will blink twice and go out.
To access the Activities, simply press the ACTIVITY key to scroll through until the desired
one is lit. You can return to controlling by device by using the DEVICES key.
INPUT Shift
As the INPUT key is intended to select the input on your TV and most TVs use a menu to
select from a list of inputs, when the INPUT key is pressed in an Activity, the Menu Up,
Down, Left, Right and OK keys temporarily control the TV. If the OK key is pressed, or no
key is pressed for ten seconds, these keys will revert to controlling the relevant device for
the Activity (e.g. STB in Watch TV Mode).
Power Macro
If you hold down the Power key for 2 seconds in any Activity, the remote will send the
Power function for each device contained within that Activity. So for example, holding
Power in the default setting for Watch TV will turn both the TV and Set Top Box on or off.
ACTIVITIES

PROGRAM A MACRO
You can program any key on your OFA remote (except MAGIC, DEVICES and the three App
Shortcut keys) to send multiple commands on a single press –a Macro. This can be useful
for controlling multiple devices to put them in a certain state – for instance you could put
your TV on HDMI 1 and press Play on the Blu-ray player to start watching a movie. A key
programmed with a Macro will send the same Macro regardless of the device mode, so it
is best to select a key you don’t use, or use one of the spare A, B or C keys.
To program a macro, the procedure is as follows:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode key will stay lit.
2. Press 995 – the LED will blink twice.
3. Next select the key you want to program the Macro on.
4. Now use the DEVICES key to select the device you want the first
function of the Macro to come from, for example TV.
5. Next, press the key you want to include in the Macro, for example
the INPUT key.
6. Repeat steps 4 (if necessary), and 5 to add more keys to the Macro. You can include up
to 15 key presses.
7. To store the Macro, hold down the MAGIC key until the LED blinks
twice.
* Remember to press the keys in the same order you would using your original remotes – so if you pressed AV on the TV
remote and then Play on the Blu-ray remote to watch a movie, do it in the same order on the Smart Control.
* If the LED shows a long blink when you press a key in steps 3 or 4, you have entered too many keys, please try again.
TO DELETE A MACRO
If you want to remove a macro from a key, please perform the following:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode key will stay lit.
2. Press 995 – the LED will blink twice.
3. Press the key the macro is programmed on.
4. Now hold down the MAGIC key until the LED blinks twice –
the Macro is deleted.
MACROS
INPUT