One Stop Gardens 92989 User manual

POTTING TPOTTING T
POTTING TPOTTING T
POTTING TABLEABLE
ABLEABLE
ABLE
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2005 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
92989

Page 2
SKU 92989 For technical questions, please call 1-800-444-3353
Specifications
Item Description
Table Material Fir Wood with galvanized hardware
Overall Dimensions 39.3 (L) x 18.8 (W) x 61.3 (H) inches
Bottom Shelve Dimensions 34.25 (L) x 10 (W) inches
Shelve Dimensions 37.75 (L) x 3.75 (W) x ¾ (H) inches
Table Top Dimensions 39-1/4 (L) x 17 (W) inches; 34 inches from floor
Basin Dimensions 12 (L) x 9-1/4 (W) x 2 (D) inches
Table Weight Capacity 80 lbs.
Overall Weight 35 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING:When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords. Do not allow children to sit, stand or
play on or around the Potting Table.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
6. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
8. Install this product on a proper surface. Locate on a flat, level, and solid surface
that is capable of supporting the weight of the Table and its 80 lbs. load capacity.

Page 3
SKU 92989 For technical questions, please call 1-800-444-3353
Unpacking
When unpacking, check to make sure the following parts are included. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
NOTE: There are no replacement parts available for this product.
REV 05/05

Page 4
SKU 92989 For technical questions, please call 1-800-444-3353
Assembly
During assembly, please note that screw guide holes have been predrilled. Do not drill new
holes. Also, do not overtighten screws as you can strip the threads in the wood. Parts are
labeled with their part letter for easy assembly.
1. Place two Shelves (C) into the Side Pieces (B) and secure with eight large Screws (L).
2. Place Shelf Backing (A) against the Shelves and Side Pieces, and secure with four
large Screws (L).

Page 5
SKU 92989 For technical questions, please call 1-800-444-3353
3. Lay the assembled Shelves flat on the floor and attach two Shelf Supports (D) using
smallest Screws (N).
4. Lay the Table Top (E) upside down on the floor, and one by one, insert and secure the
Legs (G1 and G2) using Bolts, Washers, and Nuts (K).
Note that Leg (G1) is placed at the left-front corner and right-rear corner.
+

Page 6
SKU 92989 For technical questions, please call 1-800-444-3353
5. Secure Leg Supports (J) to the inside of Legs (G1 and G2) using Bolts, Washers, and
Nuts (K).
Note that the two small holes in the Leg Supports (J) are towards the top.
6. With the help of another person, turn the Table right-side up. Place the Bottom Shelf
(F) on the Leg Supports (J). Secure with four medium size Screws (M).

Page 7
SKU 92989 For technical questions, please call 1-800-444-3353
7. With the help of another person, lift the Shelf and Back assembly (A and B) onto the
Table (E) and secure with six Screws (M).
REV 05/05

Page 8
SKU 92989 For technical questions, please call 1-800-444-3353
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDEDTHE PARTS DIAGRAM INTHIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
8. Place the Basin (I) into the hole in the Table (E).
9. Place the Basin Cover (H) in the Table (E) hole.
10. Paint or seal all wood surfaces.
To preserve the wood, it is recommended to finish all wood surfaces with a clear stain
or paint.
Warning: The warnings, cautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product, but
must be supplied by the operator.