Onkyo SKF-3600 User manual

En
Speaker System
SKF-3600
Instruction Manual
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new speaker system.
Please retain this manual for future reference.
Contents
Supplied accessories 2
Using the included
speaker bases 2
Placement 2
Connections 3
Precaution on use 3
Speaker care 4
Use with a TV set or
computer 4
Specifications 4

2
SKF-3600 (front speaker)
×
2
Speaker cord
×
2 (red, white: 3.5m)
Speaker base × 2
Screws
×
6
Front left and right speakers
Output overall sound. They play the most important role
in a home theater system, by creating basic sound
images and fields.
Place the front speakers in front of the listener so that
they point to the listener’s ears in the listening position
for music and movies. Ideal speaker placement is so that
they are located symmetrically.
The speaker cabinet is made of wood and sensitive to
extreme temperatures and humidity. Avoid placing the
speaker system in locations subjected to direct sunlight
or in humid places such as near an air conditioner, bath-
room, or kitchen.
Before making speaker connection, attach the supplied
speaker bases to the SKF-3600.
1. Turn the speaker upside down.
2. Match the screw halls on the speaker base to those
on the speaker, and fix the base to the speaker using
screws.
SAFETY PRECAUTIONS:
• When attaching the speaker bases, work with them on
a flat, level, and solid floor.
• After attached the speaker bases, verify that the
speakers stand upright and stably.
Using the speaker cable hook
The supplied speaker base has a speaker cable hook. It
is recommended that you hook the cables on the hook to
avoid cable congestion.
Supplied accessories
Placement
Using the included speaker bases

3
• Be sure to turn off your amplifier before connecting
the speaker system. Connecting it while the amplifier
is on may result in damage to the amplifier or the
speaker system.
• The nominal impedance of this speaker system is 8 Ω .
Use only amplifiers capable of handling this imped-
ance.
• Use the supplied speaker cables to connect between
the speaker’s input terminals and the amplifier’s
speaker terminals as illustrated below.
• Be sure to connect the Right and Left speakers with
the amplifier’s corresponding speaker terminals.
Also, be sure that you are connecting the speaker’s
positive (+) and negative (–) input terminals with the
amplifier’s corresponding positive and negative
speaker terminals. Otherwise, undesirable sound field
or impaired bass-range reproduction will result.
• Before turning on the amplifier’s power switch, pull
lightly on the speaker cables to ensure that they are
connected securely.
• To prevent damage to circuitry,
never short-circuit the positive
(+) and negative (–) speaker
wire.
• This speaker system can handle the specified input
power when it is used for ordinary music reproduc-
tion. If the following abnormal signals are fed to the
speaker, however, an overcurrent may flow in the
internal circuits, causing burning or breakage of the
wires even if the input power is below the specified
rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette
tape deck
3. High-frequency sound generated by an oscillator,
an electronic musical instruments, etc.
4. Oscillating amplifier signals
5. Special test signals produced by audio checking
CD, etc.
6. Sound produced when connecting or disconnect-
ing audio connection cables (Always turn off the
amplifier’s power before connecting or discon-
necting cables.)
7. Howling when a microphone is used
• Do not place magnetic objects such as screwdrivers
and iron parts near the speaker system since they use
speakers with strong magnets. Otherwise, the objects
may be attracted, causing injury or damaging the dia-
phragm.
Connections
SURROUND BACK
SPEAKER
FRONT
SPEAKERS SURROUND
SPEAKERS CENTER
SPEAKER
R
L
R
L
AB
R
L
SKF-3600
Front right
speaker
SKF-3600
Front left
speaker
SKC-3600
Center speaker
SKM-3600
Surround right
speaker
SKM-3600
Surround left
speaker
Red White
1. Strip the insulation of speaker
cables, and twist the core wires
tightly.
2. While pressing the lever, insert
the wire into the hole, and then
release the lever.
3. Make sure that the terminals
are gripping the core wires, not
the insulation.
Both SKC-3600 and SKM-3600 come with SKS-3600.
Precaution on use

SN 29343811
D0404-1
http://www.onkyo.com/
HOMEPAGE
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: [phone] Fax: [phone]
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: [phone] Fax: [phone] http://www.onkyousa.com
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: [phone] Fax: [phone] http://www.onkyo.net
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: [phone] Fax: [phone]
(C) Copyright 2004 ONKYO CORPORATION Japan. All rights reserved.
Your Onkyo speakers are finished with a very high qual-
ity polymer laminate covering that serves to protect the
wood speaker cabinet.
The covering may be cleaned with a soft cloth moist-
ened with water and a mild soap. Avoid the use of furni-
ture polishes or harsh cleansers.
Use a soft brush or hand vacuum cleaner to remove dust
and lint from the grille material.
In general, Braun tubes used for color television sets
and computers are extremely sensitive and can be
affected even by the magnetism of the earth. If a speaker
system is used near them, therefore, discoloration or
distortion of pictures will occur. To allow use with a
color television set or computer, this speaker system is
provided with magnetic shielding. Even so, discolora-
tion may still result, depending on the installation envi-
ronment. If discoloration occurs, turn off the power of
the television set or computer, wait for 15 to 30 minutes
and then turn it on again. This activates the self-demag-
netizing function of the television set or computer,
improving the display condition.
Note:
If discoloration persists even after performing this rem-
edy, move the speaker apart from the television set or
computer. Discoloration may also be caused when a
magnet or other magnetizing object exists near the tele-
vision or computer because of the combined effect.
SKF-3600
Type: 2-way bass reflex
Impedance: 8 Ω
Maximum input power: 100 W
Output sound pressure level: 84 dB
Frequency response: 55 Hz - 35 kHz
Crossover frequency: 6000 Hz
Cabinet capacity: 7.9 L
Speaker (woofer): 8 cm cone
×
2
Speaker (tweeter): 2.5 cm balanced dome
Dimensions:
Speaker: 104 (W) × 913 (H) × 138 (D) mm
Speaker with base:
300 (W) × 929 (H) × 300 (D) mm
(Overall dimensions)
Weight: 4.5 kg, 6.1 kg (with base)
Others: Magnetic shielding
Specifications and appearance are subject to change for
improvement without prior notice.
In catalogs and on packaging, the letter added to the end
of the product name indicates the color of the SKF-
3600. Specifications and operation are the same regard-
less of color.
Speaker care
Use with a TV set or computer
Specifications